HVLS Floor Fan
Big Movable Fan
A wheeled HVLS fan that throws air up to 28 m in open space, for bays where nothing can be hung from the roof and the cooling has to follow the work.
Spot Cooling Where a Ceiling Fan Cannot Be Installed
Sometimes the right answer is not a ceiling fan. A crane travels the full width, the unit is leased, the structure is temporary, or the hot spot moves with the work. Portable HVLS equipment solves those cases without compromising on the air movement principle, because the motor and the blade design are the same.
The Route
Every Stage From Enquiry to After-Sales
Nothing here is a slogan. Each stage is a thing somebody has to do, and most delays on a fan project come from skipping one of them.
1
1. Establish why the ceiling is unavailable
Crane travel, lease restrictions, a temporary structure, or a layout that changes. The reason matters, because a temporary restriction sometimes argues for a mixed installation rather than an all-portable one.
2
2. Measure the throw you need
The big movable fan reaches up to 28 m in open space. Obstructions shorten that, so the bay length and what sits in it decide both the size and the position.
3
3. Decide drum or tilting head
The movable fan is the large drum format for covering a long bay. The stand fan adds 45 degree up and down tilt across three sizes, which is what a court or a vehicle lift needs.
4
4. Match the supply
Motors wound for the voltage, phase and frequency on site so the fan runs from a socket rather than through a transformer.
5
5. Factory commissioning
Both ranges are pre-installed and commissioned in the factory, which removes the assembly work and the commissioning visit entirely.
6
6. Delivery ready to run
The fans arrive complete on their casters. Unpack, plug in, set the tilt and the speed.
7
7. In-service support
Motor warranty of two years at IP55 on the movable fan and eighteen months at IP66 on the controller, with spares from the same factory.
What You End Up With
The Outcome This Route Is Designed to Produce
- Cooling in bays that a fixed installation could never reach
- Equipment that follows the work rather than dictating the layout
- No contractor, no roof penetration and no landlord conversation
- A rental-friendly asset for operators who hire cooling out by the week
Products Used
What This Solution Is Built From
HVLS Floor Fan
HVLS Floor Fan
Industrial Stand Fan
Three sizes, four wheels, IP55, and a pivot that puts the air where the work is rather than where the fan happens to point.
Questions
Questions About This Route
Up to 28 m in open space at the top of the speed range on the big movable fan. In a building full of machinery expect less, and position the fan so the air runs down an aisle rather than into an obstruction.
In a small or temporary space, yes. Across a whole plant, a ceiling installation covers more floor per unit and frees the floor. The honest answer is usually a mix, with portables in the bays the ceiling fans cannot serve.
None. Both ranges are factory pre-installed and commissioned and are maintenance-free in use, which is the main reason facilities teams choose them for a fast fix.
Lock the casters once positioned, and check the rating against the environment. Both ranges are IP55 with IP66 controllers, and the big movable fan is specified outdoor and waterproof.
We sell rather than rent, but rental fleets are a normal customer for these ranges and we support them with nameplate branding and spares. Tell us the fleet size and the branding requirement with the enquiry.
Start at Stage One
Send what you already know about the building or the duty. We will tell you what is missing before you have to ask.