HD-PF-K
PF
40.5 µm total, over 88% transmittance in the 400–1100 nm band, and over 1000 kWh/m² UV endurance.
View specification →
Weather-Resistant Layer
PVDF
HOMA-K
Over 40% fluorine content, no chalking or cracking after 800 kWh/m² UV, and a matte finish under 30 GU.
The front film of a lightweight module is the only thing between the cells and twenty-five years of ultraviolet. Get the chemistry wrong and it chalks, hazes and cracks, and the module loses output through a surface problem rather than a cell problem.
HOMA-K is the high-fluorine answer. Over 40% fluorine content carries it past 800 kWh/m² of UV exposure with no chalking or cracking, and a matte surface keeps reflected glare down where modules sit near roads, airports or housing.
Why this one
- Over 40% fluorine contentMaintains perfect condition without chalking or cracking after 800 kWh/m² UV exposure.
- Over 91% light transmittanceThe light the film gives away never reaches the cell, so transmittance is a direct yield term.
- Blocks over 99% of ultraviolet radiationProtects the encapsulant and cells behind it, which is where UV damage actually shows up as yellowing and delamination.
- Matte surface below 30 GU glossEffectively reduces light pollution — the reason glare complaints stop projects near airports and residential streets.
Specification
| Test Item | Requirements | Range | Test Method |
|---|---|---|---|
| Thickness (μm) | 20~50 | -0/+2 | Each volume in the width direction measure 5 points, and test environment temperature is 25℃. |
| Width (mm) | 1000~1300 | -0/+5 | Each volume in the length direction measure 5 points, and test environment temperature is 25℃. |
| Length (m) | 3000, 6000 or others | -0/+5 | Samples are Measured with meter or tape in 25 degrees. |
Values as published by the manufacturer. Tolerances and roll formats are confirmed in writing per order.
Storage and shelf life
High storage stability with no special storage requirements. Warranty period is one year under cool, dry storage conditions.
Applications
- Foldable and portable lightweight modules
- Residential balcony lightweight modules
- Automotive-integrated lightweight modules
- Commercial and industrial distributed lightweight modules
- BIPV
- Pneumatic structures
- Carports and gas stations
- Portable PV
Supplied from
Suzhou, Jiangsu, China — and PT. Hondol Material Indonesia, Batam, for customers served from Indonesia.
Questions about PVDF
PVDF or ETFE?
ETFE gives higher transmittance (94%) and a self-cleaning surface. PVDF gives a matte low-gloss finish and over 40% fluorine content. Choose ETFE for maximum yield, PVDF where glare or appearance is a project constraint.
What thicknesses are available?
20–50 µm with a −0/+2 µm tolerance, in widths of 1000–1300 mm and roll lengths of 3000 m, 6000 m or other lengths to order.
How is thickness verified?
Five points are measured across the width of each roll at a 25°C test environment temperature, per the published test method.
Related products
Same series first, then the rest of Lightweight PV Solutions.
HOMA-E
ETFE
94% transmittance, self-cleaning, unchanged after 25+ years outdoors, UL94 V-0.
View specification →
C&I Distributed Lightweight Modules
Up to 23.0% deliverable efficiency in a module light enough for a roof that was surveyed as non-load-bearing.
View specification →
Automotive-Used PV Modules
−40°C to 150°C, continuous high-frequency vibration, 15 years or 250,000 km.
View specification →Get PVDF quoted against your own construction.
Send the module format, the annual volume and the destination market. The reply carries the price, the lead time and the certificate.