HMS Series
Residential Solar Microinverter
Module-level MPPT under 60 V DC, so one underperforming panel stops costing you the whole roof.
View specification →
Inverters
C&I Solar Microinverter
MiT Series
5,000 W three-phase, 20 A input, IP67, with Sub-1G communication stable to 400 metres.
Commercial rooftops are big enough that data becomes the problem. Modules spread across a 200-metre factory roof, steel structure in every direction, and a monitoring link that drops out is a monitoring link that does not exist.
The MiT platform is the C&I answer: three-phase 5,000 W output compatible with 182, 210R and 210 format modules, IP67 sealing for flood and typhoon conditions, and Sub-1G radio that holds a stable, interference-free link up to 400 metres.
Why this one
- Designed for safetyEach input supports two PV modules in series, ideal for applications with low DC voltages under 120 V / 140 V.
- Industry-leading 25-year warrantySpecified so that no replacement is needed during the whole lifetime of the solar plant.
- Power from virtually any roofEliminates the barrel effect, allowing installation on less-than-ideal roofs without compromising generation.
- IP67 protectionStays reliable in extreme weather including floods and typhoons.
- Built for high-power modulesSupports up to 20 A input, compatible with 182, 210R and 210 modules, at 5,000 W three-phase — sized for C&I and large residential installations.
- Sub-1G communication to 400 mStable, interference-free data transmission across large roofs, with robust data security for the life of the system.
Specification
The manufacturer does not publish a numeric specification table for this product. The performance figures above are as published; a full datasheet with dimensions, electrical data and tolerances is sent by email against the model number and destination market.
Applications
- Commercial and industrial rooftops
- Large residential installations
- Distributed arrays spread over long distances
Supplied from
Suzhou, Jiangsu, China — and PT. Hondol Material Indonesia, Batam, for customers served from Indonesia.
Questions about C&I Solar Microinverter
How many modules does one unit take?
Each input supports two PV modules in series, and the unit is rated for up to 20 A input at 5,000 W three-phase.
What is the barrel effect?
The way a series-wired array performs at the level of its worst module, like a barrel holding water only to its shortest stave. Module-level conversion removes it.
Will the radio link reach across a large factory roof?
Sub-1G technology is specified for stable transmission up to 400 metres, which is what makes it workable on C&I sites where 2.4 GHz links struggle.
Related products
Same series first, then the rest of PV System Products.
HJ-132-710W
HJ-132-710W
710 W of n-type TOPCon output per module, for projects where the balance-of-system bill is bigger than the module bill.
View specification →
HJ-132-620W
HJ-132-620W
Up to 23% efficiency from n-type bifacial double-glass with MBB half-cell construction, and a low open-circuit voltage that lets you build longer strings.
View specification →
HJ-B1-520W
HJ-B1-520W
1.8 mm thick, 2.9 kg/m², bends to a 0.3 m radius — the world's first 520 W hail-resistant, micro-crack-free flexible crystalline silicon module.
View specification →Get C&I Solar Microinverter quoted against your own construction.
Send the module format, the annual volume and the destination market. The reply carries the price, the lead time and the certificate.