HJ-132-710W
HJ-132-710W
710 W of n-type TOPCon output per module, for projects where the balance-of-system bill is bigger than the module bill.
View specification →
High-Efficiency PV Modules
HJ-132-620W
HJ-132-620W
Up to 23% efficiency from n-type bifacial double-glass with MBB half-cell construction, and a low open-circuit voltage that lets you build longer strings.
String length is the quiet cost driver in a PV plant. Every module you cannot fit into a string is another combiner input, another cable run and another set of terminations, and the limit is set by open-circuit voltage at the coldest temperature the site sees.
The HJ-132-620W was designed with that in mind. Its lower open-circuit voltage allows more modules per string, which pulls cost out of cable, mounting structure and foundations before a single watt has been generated.
Why this one
- Up to 23% conversion efficiencyN-type bifacial double-glass combined with multi-busbar half-cell technology.
- First-year degradation ≤1%, then 0.4% a year for 30 yearsBacked by a 12-year product and workmanship warranty and a 30-year linear power warranty.
- Longer strings from a lower open-circuit voltageMore modules per string cuts system cost for cables, mounting structures and foundations, lowering the levelised cost of energy.
- Survives what the site throws at itPasses IEC standard and enhanced testing, salt mist, ammonia, sand dust, uneven snow load, flexible mounting compatibility, salt water immersion and extreme wind speed tests equivalent to a Category 17 hurricane.
- Strong low-light and temperature behaviourGenerates usefully under low irradiance at dawn and dusk, and holds efficiency better than conventional modules at high cell temperature.
- Lower embodied impactBifacial double-glass and half-cell construction reduce material usage and waste, and the manufacturing process carries lower carbon emissions.
Specification
The manufacturer does not publish a numeric specification table for this product. The performance figures above are as published; a full datasheet with dimensions, electrical data and tolerances is sent by email against the model number and destination market.
Applications
- Utility-scale ground-mount plants
- Distributed commercial and industrial arrays
- Bifacial installations over high-albedo ground
Supplied from
Suzhou, Jiangsu, China — and PT. Hondol Material Indonesia, Batam, for customers served from Indonesia.
Questions about HJ-132-620W
What does bifacial gain depend on?
Ground albedo, mounting height and row spacing. The module makes rear-side generation possible; the site design decides how much of it you collect.
How does this compare with the 710 W module?
Same n-type double-glass family. The 710 W maximises watts per module and cuts the module count; the 620 W offers a lower open-circuit voltage and longer strings. Which wins depends on whether your cost is dominated by structure or by DC cabling.
Is there a 30-year power warranty?
Yes — a 30-year linear power output warranty alongside the 12-year product and workmanship warranty.
Related products
Same series first, then the rest of PV System Products.
HJ-B1-520W
HJ-B1-520W
1.8 mm thick, 2.9 kg/m², bends to a 0.3 m radius — the world's first 520 W hail-resistant, micro-crack-free flexible crystalline silicon module.
View specification →
HJ-B1-445W
HJ-B1-445W
23.8% efficiency and −0.26%/°C, with a busbar-free front side that removes about 5.5% of the connection points from an equivalent DC block.
View specification →
MiT Series
C&I Solar Microinverter
5,000 W three-phase, 20 A input, IP67, with Sub-1G communication stable to 400 metres.
View specification →Get HJ-132-620W quoted against your own construction.
Send the module format, the annual volume and the destination market. The reply carries the price, the lead time and the certificate.