HJ-132-620W
HJ-132-620W
Up to 23% efficiency from n-type bifacial double-glass with MBB half-cell construction, and a low open-circuit voltage that lets you build longer strings.
View specification →
High-Efficiency PV Modules
HJ-132-710W
HJ-132-710W
710 W of n-type TOPCon output per module, for projects where the balance-of-system bill is bigger than the module bill.
On open ground the module is rarely the expensive part. Mounting steel, foundations, cable, trenching, labour and land all scale with the number of modules rather than the watts, which is why a 710 W panel beats a 550 W panel on total project cost even when the two cost the same per watt.
The HJ-132-710W is built for that arithmetic: 132 half-cut n-type TOPCon cells in a double-glass laminate, above 22% conversion efficiency, and a degradation curve that keeps the revenue model honest for thirty years.
Why this one
- Above 22% conversion efficiencyHigh-efficiency n-type TOPCon cell technology converts more of the same irradiance, so a fixed plot of land carries more capacity.
- First-year degradation ≤1%, then about 0.4% a yearLow light-induced and potential-induced degradation characteristics, backed by a 12-year product and workmanship warranty and a 30-year linear power output warranty.
- Temperature coefficient around −0.28%/°CThe module holds more of its rated power at the cell temperatures a real array actually runs at, which is where the nameplate comparison usually breaks down.
- Double-glass structureWeather and impact resistance against wind, sand, rain and snow, verified through IEC standard testing plus salt spray and ammonia tests.
- Fewer modules per megawattHigh module power cuts the count of mounting structures, foundations and cable runs, shortens installation time and reduces land occupation — all of it LCOE.
- Good low-light responseUseful generation at dawn and dusk extends the daily generating window rather than just the peak.
Specification
The manufacturer does not publish a numeric specification table for this product. The performance figures above are as published; a full datasheet with dimensions, electrical data and tolerances is sent by email against the model number and destination market.
Applications
- Utility-scale ground-mount plants
- Large commercial rooftops
- Agricultural and fishery PV complexes
Supplied from
Suzhou, Jiangsu, China — and PT. Hondol Material Indonesia, Batam, for customers served from Indonesia.
Questions about HJ-132-710W
What warranty comes with the module?
A 12-year product materials and workmanship warranty and a 30-year linear power output warranty, as published for this series.
Is it suitable for a rooftop?
It is a large, heavy double-glass module aimed at ground mount and large industrial roofs. For a roof with limited load capacity, the HJ-B1-520W flexible module is the right answer instead — it weighs 2.9 kg/m².
Can the module be supplied with matched inverters and storage?
Yes. Hondol supplies the generating side of a plant as one matched package, including inverters, energy storage, junction boxes and accessories, plus turnkey EPC service.
Related products
Same series first, then the rest of PV System Products.
HJ-B1-520W
HJ-B1-520W
1.8 mm thick, 2.9 kg/m², bends to a 0.3 m radius — the world's first 520 W hail-resistant, micro-crack-free flexible crystalline silicon module.
View specification →
HJ-B1-445W
HJ-B1-445W
23.8% efficiency and −0.26%/°C, with a busbar-free front side that removes about 5.5% of the connection points from an equivalent DC block.
View specification →
MiT Series
C&I Solar Microinverter
5,000 W three-phase, 20 A input, IP67, with Sub-1G communication stable to 400 metres.
View specification →Get HJ-132-710W quoted against your own construction.
Send the module format, the annual volume and the destination market. The reply carries the price, the lead time and the certificate.