PV backsheets, encapsulant films and lightweight modules — Suzhou, China & Batam, Indonesia Monday – Friday, 09:00 – 18:00 GMT+8 [email protected]
Building-integrated PV canopy seen from underneath
Application

BIPV & Pneumatic Structures

Photovoltaics that have to answer to an architect before they answer to an engineer.

The problem

What normally goes wrong here

Building-integrated PV fails on appearance and on geometry. Rigid rectangles do not follow a façade, visible white backsheet gaps ruin a black elevation, and an air-supported membrane structure cannot carry a glass laminate at all.

What Hondol brings to it

  • Flexible laminates bending to a 0.3 m radius for curved and irregular surfaces
  • High-reflection black backsheets for uniform all-black elevations with +2.66% CTM gain
  • ETFE front film with a self-cleaning low-surface-energy finish and UL94 V-0 flame rating
  • Customised module outlines to match the architecture rather than the other way round

Relevant series


Other applications

Products specified for this application

HJ-B1-520W

HJ-B1-520W

1.8 mm thick, 2.9 kg/m², bends to a 0.3 m radius — the world's first 520 W hail-resistant, micro-crack-free flexible crystalline silicon module.

View specification →
HD-CPC-HB / HD-CPC-H2B

Double-Sided Black

All-black appearance with an average CTM gain of +2.66% over conventional black backsheets.

View specification →
HD-CPC-HB

White Outer / Black Inner

The black appearance where it is seen, the white surface where it helps the module stay cool.

View specification →
HOMA-E

ETFE

94% transmittance, self-cleaning, unchanged after 25+ years outdoors, UL94 V-0.

View specification →
HD-PF-K

PF

40.5 µm total, over 88% transmittance in the 400–1100 nm band, and over 1000 kWh/m² UV endurance.

View specification →

Working on a bipv & pneumatic structures project?

Send the structure, the load limit and the target capacity. You get a material recommendation and, where it applies, a module construction to match.