PV backsheets, encapsulant films and lightweight modules — Suzhou, China & Batam, Indonesia Monday – Friday, 09:00 – 18:00 GMT+8 [email protected]
Solar carport canopy over parking bays
Application

Solar Carports & Gas Stations

Long spans, public footfall and hail — with charging load underneath.

The problem

What normally goes wrong here

A carport canopy is a long-span steel structure whose cost is driven by the dead load it carries, and it sits over vehicles and people, so a hail event that shatters glass is a liability event rather than a maintenance one.

What Hondol brings to it

  • Module weight under 3 kg/m², cutting the steel the canopy needs
  • PRG/AGR prepreg withstanding a 25 mm ball at 16 m/s with ≤5% power degradation
  • 520 W flexible module tested against 25 mm hail at 82.8 km/h
  • PV-plus-storage-plus-charging system packages for station sites

Relevant series

  • Structural Protection Layer — CPC/CDPC sheet, PRG/AGR prepreg and HD-SG strengthened backsheet — the rigidity that glass used to provide.
  • Energy Storage Systems — Cabinet storage for C&I sites, microgrids, virtual power plants and backup duty.
  • Lightweight PV Module — Finished modules built on Hondol's own encapsulation stack — rooftop, foldable, balcony and automotive.

Other applications

Products specified for this application

HD-PGR / HD-AGR

PRG/AGR

Withstands a 25 mm ball at 16 m/s with ≤5% power degradation, and over 1000 kWh/m² UV resistance.

View specification →
HJ-B1-520W

HJ-B1-520W

1.8 mm thick, 2.9 kg/m², bends to a 0.3 m radius — the world's first 520 W hail-resistant, micro-crack-free flexible crystalline silicon module.

View specification →

Energy Storage Systems

Cabinet storage for C&I sites, PV-plus-storage-plus-charging stations, microgrids and backup duty.

View specification →
HD-SG-F / HD-SG-S / HD-SG-N / HD-SG-T

HD-SG

Reflectivity above 80% and water transmission below 0.5 g/m²·day, in constructions from 540 µm to 1000 µm.

View specification →

Working on a solar carports & gas stations project?

Send the structure, the load limit and the target capacity. You get a material recommendation and, where it applies, a module construction to match.