HJ-132-710W
HJ-132-710W
710 W of n-type TOPCon output per module, for projects where the balance-of-system bill is bigger than the module bill.
View specification →
High-Efficiency PV Modules
HJ-B1-445W
HJ-B1-445W
23.8% efficiency and −0.26%/°C, with a busbar-free front side that removes about 5.5% of the connection points from an equivalent DC block.
Rooftop capacity is bounded by area, so efficiency is not a vanity metric there — it is the difference between covering the load and not covering it. And once the array is up, the cost that quietly accumulates is maintenance: failed cells, hot spots, connection faults on a roof that is awkward to reach.
The HJ-B1-445W is specified against both. It delivers up to 23.8% efficiency with a −0.26%/°C temperature coefficient, and its busbar-free front side means roughly 5.5% fewer connection points for the same DC capacity — fewer places for the array to fail.
Why this one
- Up to 23.8% deliverable efficiencyAmong the highest in the range, which matters most where roof area, not budget, is the binding constraint.
- First-year degradation ≤1%, then ≤0.35% a yearOne of the flattest degradation curves published in this range.
- 15-year product warranty, extendable to 25; 30-year power warrantyWarranty terms as published for this model.
- Temperature coefficient of −0.26%/°CSuperior high-temperature behaviour, so the gap between nameplate and field output stays narrow through a summer afternoon.
- Dual-roofpit compatibilityMaximises rooftop capacity with optimised partial shading tolerance, letting you use roof planes that a less shade-tolerant module would waste.
- About 5.5% fewer connection pointsThe busbar-free front side improves safety and reliability and reduces failure rates, cutting O&M cost alongside high-temperature suppression and micro-crack resistance.
Specification
The manufacturer does not publish a numeric specification table for this product. The performance figures above are as published; a full datasheet with dimensions, electrical data and tolerances is sent by email against the model number and destination market.
Applications
- Residential rooftops
- Commercial and industrial rooftops
- Distributed generation projects with limited roof area
Supplied from
Suzhou, Jiangsu, China — and PT. Hondol Material Indonesia, Batam, for customers served from Indonesia.
Questions about HJ-B1-445W
Why does a busbar-free front side matter?
Every soldered connection is a potential failure point and a source of resistive loss. About 5.5% fewer connection points for the same DC capacity means measurably fewer field faults over a 30-year life.
Can the product warranty really run to 25 years?
The published terms are a 15-year product warranty extendable to 25 years, plus a 30-year power warranty. The extension terms are confirmed per order.
Does it pair with microinverters?
Yes. Module-level MPPT is a natural fit for the partial-shading tolerance this module is designed around, and Hondol supplies both residential and C&I microinverters.
Related products
Same series first, then the rest of PV System Products.
HJ-132-620W
HJ-132-620W
Up to 23% efficiency from n-type bifacial double-glass with MBB half-cell construction, and a low open-circuit voltage that lets you build longer strings.
View specification →
HJ-B1-520W
HJ-B1-520W
1.8 mm thick, 2.9 kg/m², bends to a 0.3 m radius — the world's first 520 W hail-resistant, micro-crack-free flexible crystalline silicon module.
View specification →
MiT Series
C&I Solar Microinverter
5,000 W three-phase, 20 A input, IP67, with Sub-1G communication stable to 400 metres.
View specification →Get HJ-B1-445W quoted against your own construction.
Send the module format, the annual volume and the destination market. The reply carries the price, the lead time and the certificate.