All Fanbang Tube Products
Twelve products in four families - mechanical finned tube, welded finned tube, seamless tube and tubesheets. Every dimension shown is a range our production lines run.
Mechanical Finned Tube
Fins bonded to the tube by groove, tension or extrusion - the air cooled heat exchanger family
"G" Embedded Fin Tube
Fin strip rolled into a machined groove in the tube wall for permanent metal-to-metal contact
Base tube diameter: 16 mm - 80 mm · Base tube wall thickness: 1.65 mm - 4.0 mm
L/LL/KL Fin Tube
Tension-wound foot fin in three footprint styles, the standard choice for air cooled heat exchangers
Base tube diameter: 19 mm - 51 mm · Base tube wall thickness: 1.65 mm - 3.0 mm
Extruded Fin Tube
Bimetal tube with the fin extruded from an outer sleeve, giving a seamless fin-to-tube wall
Base tube diameter: 10 mm - 51 mm · Base tube wall thickness: 1.65 mm - 3.0 mm
Low Fin Tube
Integral low fin rolled from the tube wall itself, for shell and tube exchangers
Base tube diameter: 12.7 mm - 31.8 mm · Base tube wall thickness: 1.65 mm - 3.0 mmWelded Finned Tube
Spiral, H type, longitudinal and stud fins welded to the tube for flue gas service
Spiral Fin Tube
Continuously welded helical fin for boiler, economizer and flue gas duty
Base tube diameter: 15 mm - 70 mm · Base tube wall thickness: 2.0 mm - 15.0 mm
H/HH Fin Tube
Split square fins welded in pairs, leaving a straight ash lane along the tube
Base tube diameter: 25 mm - 73 mm · Base tube wall thickness: 3.0 mm - 6.0 mm
Longitudinal Fin Tube
Straight fins welded along the tube axis for viscous fluids and low velocity gas
Base tube diameter: 12 mm - 273 mm · Base tube wall thickness: 2.11 mm - 25.4 mm
Stud Fin Tube
Individually welded studs for the dirtiest furnace and process heater duty
Base tube diameter: 38 mm - 273 mm · Base tube wall thickness: 3.5 mm - 10.0 mmSeamless Tube
Stainless, duplex and nickel alloy seamless tube and pipe from our own 25 machine workshop
Stainless Steel Tube
Austenitic and super austenitic seamless tube and pipe to ASTM A213, A269 and A312
Tube outside diameter: 1/2" - 3" (12 mm - 76.2 mm) · Tube wall thickness: 0.02" - 0.5" (0.5 mm - 12.0 mm)
Duplex Stainless Steel Tube
Duplex and super duplex seamless tube and pipe to ASTM A789 and A790
Tube outside diameter: 1/2" - 3" (12 mm - 76.2 mm) · Tube wall thickness: 0.02" - 0.5" (0.5 mm - 12.0 mm)
Nickel / Nickel Alloy Tube
Monel, Inconel, Incoloy and Hastelloy grade seamless tube for the hardest corrosion duty
Tube outside diameter: 1/2" - 3" (12 mm - 76.2 mm) · Tube wall thickness: 0.02" - 0.5" (0.5 mm - 12.0 mm)Tubesheets
Drilled tube plate to 5000 mm diameter, matched to the bundle we supply
Ordering Questions
Can you supply a mixed order of tube types?
Yes. Tubes, finned tubes and tubesheets are regularly supplied on one order against one bundle drawing.
Do you supply sample lengths?
Sample lengths can be produced for evaluation. Ask with the enquiry so the size is scheduled on the right line.
What information do you need for a quotation?
Base tube outside diameter and wall thickness, material, fin geometry and fin dimensions, finned length and bare end length, quantity and destination port.
Can you match an existing bundle?
Yes. Send the bundle drawing or a sample tube and we match base tube size, fin geometry, fin pitch and finned length.
Not Sure Which Tube the Duty Needs
Send the process data and the bundle envelope. We will tell you which of the twelve products fits and which one does not.
[email protected] · Tel 0086 512 58392615 · Monday to Saturday, 08:30 - 17:30 China Standard Time (GMT+8)