Optics Industry
Optical component hardware machined and inspected so it complies with your specification, not approximately.
Not only do we have the precision machines to manufacture your optical component, we also have current test equipment and skilled inspectors to make sure your optical component complies with your specifications.
Optical work rewards measurement discipline more than machining bravado. A mount whose hole positions drift by a fraction of a millimetre puts the whole assembly out of alignment, which is why every optics job here goes through first article measurement on the coordinate measuring machine before the run is released.
How We Support This Sector
| Requirement | How We Meet It | Verification |
|---|---|---|
| Hole position accuracy | Machining on the 4th axis with minimal re-fixturing | Coordinate measuring machine at first article |
| Flatness on mounting faces | Machining sequence planned to control distortion | Vertical measuring system |
| Surface roughness | Machining to below Ra 0.2, polished where required | Surface inspection at final stage |
| Concentricity on turned mounts | Turning to +/-0.005 mm on twin spindle lathes | Ring gages and CMM |
| Consistent finish | Anodizing, sand blasting or polishing to reference sample | Visual comparison against approved sample |
Capability Behind These Parts
Machining Tolerance
0.005 to 0.01 mm with surface roughness below Ra 0.2, verified on the coordinate measuring machine.
Milling and Turning
Milling 2 to 1000 mm diameter and turning 1 to 300 mm bar, both at +/-0.005 mm.
Materials
Aluminum, steel, stainless steel, titanium, brass, copper and engineering plastics.
Inspection
First piece, in-process and final inspection, with certification at every stage on request.
Optics Industry FAQ
Do you inspect optical hardware differently?
The equipment is the same, but the discipline is stricter: first article on the CMM before release, and in-process checks against the dimensions that control alignment.
Which materials do you use for optical mounts?
Aluminum most often, for weight and stability, with stainless steel where corrosion resistance or stiffness matters more.
Can you match a black anodized finish?
Yes, colour is matched against your reference sample before the production lot is anodized.
Other Industries
Send Your Drawing For This Application
Tell us the assembly, the tolerance that matters and the annual quantity.