Chrome Plated Steel Coil
Chrome Plated Steel Strip 0.1 to 0.15 mm
A plated bright surface on a precision cold rolled carbon steel base
- Production Time
- 15 days or more
- MOQ
- 1000 kg
- Standards
- GB DIN BS JIS ASTM
- Packing
- Per customer requirement
Drawings and control samples can be sent by email. We will confirm feasibility before quoting.
Product Overview
What This Product Is
Chrome plated steel coil is supplied from 0.1 mm to 0.15 mm thick in widths from 405 mm to 515 mm, on an SPCC, SPCD or SPCE base or another grade specified by the customer. The plating line runs inside the Wuxi plant, which means the base strip does not leave the site between rolling and plating.
Because the base is produced in house, the gauge and flatness that the plating line receives are already inside the ordered tolerance. That matters for a plated product, since a coating cannot correct a strip that is uneven, and a plated surface makes any base defect more visible rather than less.
This band of thickness and width is the range Yongxin has developed for converting applications where a bright chromium surface is needed on thin carbon steel strip. It was developed as a domestic replacement for imported material.
Who It Is For
- Converters needing a bright thin plated strip for onward processing
- Cable and wrapping component manufacturers
- Stamping shops producing visible decorative parts
- Electronic hardware suppliers needing a clean plated surface
- Buyers replacing imported chrome plated strip with a domestic source
Materials
The base is precision cold rolled carbon steel strip in SPCC, SPCD or SPCE. Choose the base grade by how the plated strip will be formed. SPCC suits flat and lightly formed parts, SPCD and SPCE are used where the plated strip has to be drawn.
Key Benefits
What This Product Gives Your Production Line
Base and Coating From One Plant
Rolling and plating on the same site removes the handover where gauge and surface problems usually appear.
Consistent Bright Surface
A plated finish shows every base defect, so the base is levelled and inspected before it reaches the plating line.
Tight Gauge Band
The 0.1 to 0.15 mm window is produced as a defined product rather than as an occasional trial.
Standard Cross Reference
Base grades follow GB, DIN, BS, JIS and ASTM designations so the material can be specified from your existing drawing.
Sample Before Bulk
A sample is rolled, plated and sent for approval before bulk production starts.
Export Packing to Order
Coil weight, inner diameter, wrapping and marking are set to your handling and customs requirements.
Problems It Solves
The Failure Modes This Product Is Built to Remove
Coating Highlighting Base Defects
A bright surface amplifies waviness and roll marks. Levelling and inspection happen before plating rather than after.
Gauge Drift in a Narrow Band
Holding 0.1 to 0.15 mm needs mill control, not sorting. The base is rolled on precision 650 mm mills.
Split Responsibility Between Suppliers
When the roller and the plater are different companies, a defect becomes an argument. Here one plant owns both.
Supply Dependence on Imports
This product was developed to replace imported chrome plated strip with a domestically produced equivalent.
Manufacturing Process
From Feedstock to Packed Coil
Cold rolling of the carbon steel base to the ordered gauge
Annealing and degreasing
Temper rolling and levelling so the base is flat before plating
Chrome plating on the in house plating line
Inspection of coating appearance and base condition
Slitting to the ordered width
Laboratory release and dimensional check
Wrapping, strapping, marking and export packing
Quality Control and Certifications
How the Coil Is Released
Every coil is checked in the plant laboratory before it is packed. Chemistry is confirmed in the chemical analysis laboratory, mechanical properties on the tensile testing machine and hardness tester, geometry on the optical projector and corrosion behaviour in the salt spray chamber where the specification calls for it.
- ISO 9001 certified quality management system
- ISO 14001 certified environmental management system
- Energy management system certification
- High-Tech Enterprise and Jiangsu Specialized Refined Unique and Innovative SME certificates
- Sample approval before every bulk production run
Customization Options
What You Can Change
- Grade, including grades outside the standard list when specified
- Thickness and width inside the published band, with your own tolerance
- Temper or target hardness and tensile values
- Surface finish and roughness, specified in numbers or matched to a control sample chip
- Coil weight, inner diameter, wrapping, pallet and marking
- Mill test certificate content and the standard it is issued against
Send a control sample chip if the finish is easier to show than to describe. We roll a sample, send it for approval and only then start bulk production.
Comparison With Other Products
How It Compares
| Product | Thickness | Strengths | Trade Off |
|---|---|---|---|
| Chrome Plated Steel Strip | 0.1 - 0.15 mm | Bright plated surface, domestic replacement for imported strip | Narrow thickness and width band |
| Ultra Thin Stainless Steel Strip | 0.05 - 1.0 mm | Corrosion resistance through the whole section | Higher cost, different forming behaviour |
| Cold Rolled Steel Strip | 0.035 - 0.8 mm | Widest gauge band and lowest cost | Bare surface needs protection |
Use Guide
How to Order This Product Without a Second Round of Emails
Confirm the base grade and the standard you work to
State thickness and width inside the 0.1 to 0.15 mm and 405 to 515 mm bands
Describe the surface appearance you need, or send a control sample
State the forming operation the plated strip will go through
Approve the production sample before bulk plating
Confirm coil weight, inner diameter, packing and marking
Explore Next
Related Products Applications and Articles
FAQ
Chrome Plated Steel Strip 0.1 to 0.15 mm FAQ
What thickness and width are available
Which base grades can be plated
Is the plating done in house
Can the plated strip be formed after delivery
Can you match an existing plated surface
What is the minimum order quantity
Send the Specification and We Will Quote
Grade, thickness, width, temper, surface finish, quantity and destination port are enough to start. A sample follows before bulk production.