Skip to content
Yongxin Precision Material (Wuxi) Co., Ltd. logo

Green Production

Environmental Performance Verified by a Third Party

Yongxin publishes verified greenhouse gas and product carbon footprint data rather than general environmental statements. The figures below come from certificates issued on 20 March 2025 for the 2024 reporting year.

Greenhouse Gas Inventory 2024

Verified Emissions for the 2024 Reporting Year

Shanghai Ingeer Certification Assessment Co., Ltd. issued a third party verification opinion under certificate 117-ICAS-THC202503028, in accordance with ISO 14064-1:2018 and ISO 14064-3:2019, covering 1 January 2024 to 31 December 2024. The assurance level for the verification is reasonable assurance and the verification found no material deviations.

Verified greenhouse gas emissions by category in tonnes of CO2 equivalent
Greenhouse Gas Emission CategoryVerified Data t CO₂e
Direct GHG emissions and removals219.34
Indirect GHG emissions from imported energy4218.85
Indirect GHG emissions from transportationNot applicable
Indirect GHG emissions from products used by the organizationNot applicable
Indirect GHG emissions associated with the use of products from the organizationNot applicable
Indirect GHG emissions from other sourcesNot applicable
Total GHG emissions4438.19

GHG removals for the reporting period were 0 t CO₂e. Date of certificate issue 20 March 2025.

Product Carbon Footprint

SPCC Cold Rolled Steel Strip Cradle to Gate

The carbon footprint of SPCC cold rolled steel strip produced at the Wuxi plant was verified under certificate 117-ICAS-TZJ202503036 in accordance with PAS 2050:2011, ISO 14067:2018, ISO 14040:2006, ISO 14044:2006 and ISO 14071:2024. The life cycle stage covered is cradle to gate.

ProductVerified Data
SPCC Cold-rolled Steel Strip6296.195 kg CO₂e per tonne

Certificate issued 20 March 2025 and valid to 19 March 2027 for the reporting period 1 January 2024 to 31 December 2024.

Rooftop Solar Generation

Together with Guoneng Jiangsu New Energy, Yongxin completed a 4 MW rooftop photovoltaic grid connected project on otherwise idle factory roof space, reducing purchased electricity and supporting the company's stated move toward a zero carbon future.

The Certificates

Documents Behind the Numbers

Both certificates are reproduced here in the original. PDF copies are in the download center.

Greenhouse gas verification opinion 117-ICAS-THC202503028 issued to Yongxin Precision Material Wuxi
Greenhouse Gas Verification Opinion, certificate 117-ICAS-THC202503028.Download PDF
Certificate of carbon footprint 117-ICAS-TZJ202503036 for SPCC cold rolled steel strip
Certificate of Carbon Footprint, certificate 117-ICAS-TZJ202503036.Download PDF

Environment Health and Safety

What the Plant Does Day to Day

Environmental Management

The plant is certified to GB/T 24001-2016, holds a pollutant discharge permit and carries out regular monitoring of emissions to air, water and waste. An environmental impact assessment has been completed in accordance with the law and no environmental violations have been recorded since the plant was built.

Occupational Health and Safety

The occupational health and safety management system is certified to GB/T 45001-2020. Annual safety training is carried out in full, staff in positions with occupational hazard exposure receive health examinations and all special equipment passes annual inspection.

Energy Reduction

The company holds an energy management system certification and states in its 2024 corporate social responsibility report that it will continue to promote advanced, energy saving and efficient equipment and processes.

Community

Yongxin participates in local public welfare activity. In September 2024 the company donated to the Wuxi Charity Federation in support of education, medical care and poverty relief work in Huishan District.

FAQ

Green Production FAQ

Who verified the greenhouse gas data
Shanghai Ingeer Certification Assessment Co., Ltd., an independent third party certification body, under certificate number 117-ICAS-THC202503028.
What is the product carbon footprint of Yongxin cold rolled strip
6296.195 kg CO2e per tonne for SPCC cold rolled steel strip on a cradle to gate basis, verified under certificate 117-ICAS-TZJ202503036 and valid to 19 March 2027.
What standards were used
The greenhouse gas inventory follows ISO 14064-1:2018 and ISO 14064-3:2019. The product carbon footprint follows PAS 2050:2011, ISO 14067:2018, ISO 14040:2006, ISO 14044:2006 and ISO 14071:2024.
Does Yongxin generate its own renewable energy
The company completed a 4 MW rooftop photovoltaic grid connected project together with Guoneng Jiangsu New Energy, using otherwise idle factory roof space.
Can I use these figures in my own supply chain reporting
The certificates are published here and available as PDF in the download center. Contact us if your reporting process needs the underlying documentation.

Need Emissions Data for Your Own Reporting

We can discuss what documentation your supply chain reporting process requires. Send the request and we will tell you what is available.

Email Us Call
Language