Nineteen models covering the full cut-out ladder, including the YY710 range that offers seven beam angles from a single housing.
The YY510 models are compact SMD fittings at 3 W and 6–7 W, supplied as a 45 mm or 80 mm deep body on the same Ø35 or Ø45 mm cut-out — the short body is for ceilings with no plenum depth. The YY710 models are COB-holder fittings from 8 W to 30 W on Ø45 to Ø95 mm cut-outs.
YY71005, YY71006, YY71009 and YY71010 each offer 5°, 8°, 10°, 15°, 24°, 38° and 50°. That is a single stock housing that can be built as a pinspot for a display case or as a general accent light, which keeps an OEM order from splitting into four SKUs.
Holder sizes across the range include 1304, 0202, 1204 and 1507, and the YY510 models use SMD boards. The holder is specified per order so the buyer's preferred LED brand can be fitted.
| Models in range | 19 |
|---|---|
| Wattage options | 12W, 30W, 6-7W/3W, 8W |
| Cut-out sizes | Ø35mm, Ø45mm, Ø55mm, Ø65mm, Ø75mm, Ø95mm |
| Beam angles | 15/24/38/50°, 15/24/38/60°, 15/24/38°, 5/8/10/15/24/38/50° |
| Build options | Beam angle, reflector finish, housing colour, chip holder |
| Sample lead time | Normally 7 days |
S1 Series
S1 Series
S1 Series
S1 Series
S1 Series
S1 Series
S1 Series
S1 Series
S1 Series
S1 Series
S1 Series
S1 Series
S1 Series
S1 Series
S1 Series
S1 Series
S1 Series
S1 Series
S1 Series
Both are 12 W on a Ø65 mm cut-out with a 72 mm body. They are separate catalogue entries with different chip-holder options — 1304/020/1204/1507 on the YY71007 and 1304/0202/1507 on the YY71007A.
No. On YY51022 the 6–7 W version is 52×52×H80 mm and the 3 W version is 52×52×H45 mm, both on a Ø45 mm cut-out.
Tell us the models, the quantities and the finish, and we will send pricing and a sample plan.
