
Twelve models with a visible circular trim that laps the ceiling cut, in two housing depths: the WA01 range at 72–116 mm and the shallower WA02 range at 72–93 mm.
A bordered fitting forgives a ragged or slightly oversized ceiling cut, which is why it dominates refurbishment work and mineral-fibre tile ceilings. It also gives the installer a tolerance band of a few millimetres on positioning.
At the same cut-out the WA02 body is shorter — a Ø95 mm WA02-95 is 92.5 mm deep against 116 mm for the WA01-95, at the same 30 W. Pick WA02 where the plenum is shallow, WA01 where it is not and you want the deeper reflector.
5 W at Ø47 mm, 7 W at Ø45 and Ø55 mm, 10–12 W at Ø65 and Ø75 mm, 15–18 W at Ø65 and Ø75 mm on the WA02, 25 W at Ø85 mm and 30 W at Ø95 mm. All use the 1313-08 or 1616-11 COB module and offer 15°, 24°, 36° and 50°.
| Models in range | 12 |
|---|---|
| Wattage options | 10W, 12W, 15W, 18W, 25W, 30W … |
| Cut-out sizes | 45, 47, 55, 65, 75, 85 … |
| Beam angles | 15/24/36/50° |
| Build options | Beam angle, reflector finish, housing colour, chip holder |
| Sample lead time | Normally 7 days |

Circular Border Series

Circular Border Series

Circular Border Series

Circular Border Series

Circular Border Series

Circular Border Series

Circular Border Series

Circular Border Series

Circular Border Series

Circular Border Series

Circular Border Series

Circular Border Series
1313-08 on the models up to 18 W and 1616-11 on the 24–30 W models.
Yes — 15°, 24°, 36° and 50° on all twelve models.
Tell us the models, the quantities and the finish, and we will send pricing and a sample plan.