YY71006 is a 8W S1 series fitting for a Ø55mm cut-out with 5/8/10/15/24/38/50° beam options.
| Power | 8W |
|---|---|
| Dimensions | 62×H86mm |
| Cut-out | Ø55mm |
| Beam Angle | 5/8/10/15/24/38/50° |
| LED Chip | 1304 |
| Reflector Finish | Gun black/bright silver/matte black/matte white |
| Housing Finish | White + Grey |
Beam angle, reflector finish, housing colour and chip holder are selected per order. Samples are normally ready in seven days.
Cut-out is Ø55mm, in a body measuring 62×H86mm. Check the body depth against your plenum before specifying — depth kills more downlight specifications than diameter does. This is the general accent band — enough for a 2.5–3 m ceiling over merchandise.
7 beam angles are offered from the one housing — a 5° pinspot for a single object or a tall ceiling and a 50° wash for wall and table surfaces. The source is a 1304 package. The holder footprint is listed because it decides which LED brands and output bins can be built into your order.
Reflector finish options are Gun black/bright silver/matte black/matte white. The dark finishes absorb the stray light that would otherwise leave the reflector wall at a shallow angle and land in a shopper's eye. Housing colours are White + Grey.
Ø55mm. The body measures 62×H86mm, so confirm plenum depth as well as aperture.
5/8/10/15/24/38/50°. Beam angle is selected per order, so a single project can take the same fitting at more than one angle.
Yes. Reflector finish, housing colour, chip holder, beam angle and driver are order options. Samples are normally ready in seven days.
Send the quantity, the beam angle and the finish you need. We will reply with price, lead time and a sample plan.
