YY51021 is a 6-7W/3W S1 series fitting for a Ø45mm cut-out with 15/24/38° beam options.
| Power | 6-7W/3W |
|---|---|
| Dimensions | 52×H80mm 6-7W / 52×H45mm 3W |
| Cut-out | Ø45mm |
| Beam Angle | 15/24/38° |
| LED Chip | SMD |
| Reflector Finish | Gun black |
| Housing Finish | White/Black |
Beam angle, reflector finish, housing colour and chip holder are selected per order. Samples are normally ready in seven days.
Cut-out is Ø45mm, in a body measuring 52×H80mm 6-7W / 52×H45mm 3W. Check the body depth against your plenum before specifying — depth kills more downlight specifications than diameter does. This is the general accent band — enough for a 2.5–3 m ceiling over merchandise.
3 beam angles are offered — a 15° display beam for merchandise and feature walls and a 38° wash for wall and table surfaces. The source is an SMD board, which gives smooth, even light and a shallow body. SMD does not collimate into a narrow beam the way a COB block does, so treat the listed angles as the practical range.
Reflector finish options are Gun black. The dark finishes absorb the stray light that would otherwise leave the reflector wall at a shallow angle and land in a shopper's eye. Housing colours are White/Black.
Ø45mm. The body measures 52×H80mm 6-7W / 52×H45mm 3W, so confirm plenum depth as well as aperture.
15/24/38°. Beam angle is selected per order, so a single project can take the same fitting at more than one angle.
Yes. Reflector finish, housing colour, chip holder, beam angle and driver are order options. Samples are normally ready in seven days.
Send the quantity, the beam angle and the finish you need. We will reply with price, lead time and a sample plan.
