Commercial LED Spotlights
Seventy catalogue models from Ø35 mm to Ø205 mm, 3 W to 80 W, with beam angles from 5° to 60° — built in our own die-casting workshop in Jiangmen since 2009.
Optical control
The YY710 series ships at 5°, 8°, 10°, 15°, 24°, 38° and 50° from a single Ø55 mm cut-out, so a lighting designer can change the accent without changing the ceiling drawing.
OEM & ODM
We are the original manufacturer of the products we sell. Reflector finish, housing colour, driver and chip holder are all specified per order, and samples are normally ready in seven days.
Why specifiers use us
Most lighting problems on a fit-out are not about lumens. They are about a hole that is the wrong size, a plenum that is too shallow, and a beam that dazzles the customer it was meant to impress.
Cut-outs run Ø35, Ø45, Ø47, Ø55, Ø65, Ø75, Ø80 and Ø95 mm on the round ranges and 55×55 to 317×102 mm on the grille ranges. Refurbishments rarely need a new ceiling cut.
Deep-set reflectors in gun black, matte black, bright silver and matte white keep the source out of the 45° viewing cone instead of relying on a diffuser that flattens the accent.
The aluminium housings are cast in our own workshop, so the heat-sink geometry, the trim profile and the finish are all under one roof and one lead time.
Products go through the company's standard lighting laboratory for function, anti-glare and beam-control checks before they are released.
Catalogue
44 models · Forty-four recessed accent luminaires across four housing families, from a 3 W
16 models · Sixteen multi-head recessed fittings on the WA01 platform, from a 7 W single h
7 models · Seven surface track models, including two size-ladder ranges that run Ø40 mm t
3 models · Three families covering Ø75 mm to Ø205 mm cut-outs, in SMD and COB builds, for
The factory
Jiangmen YiYo Lighting Co., Ltd designs and manufactures anti-glare LED spotlights, downlights, track lights and grille luminaires for commercial interiors.
We run our own die-casting workshop. Because the housing is also the heat sink, keeping casting in house keeps thermal geometry, trim profile and surface finish under a single lead time and a single quality record.
Where the light lands
A chain rolls out the same fitting fifty times. The specification has to survive ceilings that are never quite the same twice.
Guests notice glare before they notice light levels. Hotel work is mostly about keeping the source out of sight.
High ceilings, long sightlines and tenants who change every two years.
Screen work sets the rules: low glare at the working plane, even coverage, and a fitting that disappears into the ceiling grid.
Long aisles, tall racking, and produce that has to look like produce.
The smallest apertures in the catalogue, and the ones where the ceiling detail matters most.
Knowledge base
Technical note
The single decision that changes a retail ceiling more than wattage does.
Technical note
On a refurbishment the hole is fixed. Everything else negotiates around it.
Technical note
Two different light sources that behave differently in an optic, not two grades of the same thing.
Before you enquire
We are a factory, located in Jiangmen, China. We mainly produce LED downlights, track lights and LED linear lights among other ranges. You are welcome to visit the factory.
Ceiling spotlights, flood lights, track spotlights, linear lights, downlights and high-voltage track spotlights, among other series.
Europe and the Middle East.
Definitely. We are ready for a factory tour at any time. A face-to-face meeting is the fastest way to get to know each other and then get the work done.
Yes, and we think you should. Checking our design and quality before a mass order is essential. Contact us for sample details — a sample is normally ready in 7 days.
Tell us the aperture you have and the effect you want, and we will come back with the models that fit and a sample plan. Samples are normally ready in seven days.
