DL830-DL831-DL832 is a 12W/15W/20W recessed downlight fitting for a 75/90/120 cut-out with 60° beam options.
| Power | 12W/15W/20W |
|---|---|
| Dimensions | Ø84×47H/Ø105×50H/Ø130×58H |
| Cut-out | 75/90/120 |
| Beam Angle | 60° |
| LED Chip | SMD2835 |
| Housing Material | Aluminum |
Beam angle, reflector finish, housing colour and chip holder are selected per order. Samples are normally ready in seven days.
Cut-out is 75/90/120, in a body measuring Ø84×47H/Ø105×50H/Ø130×58H. Check the body depth against your plenum before specifying — depth kills more downlight specifications than diameter does. Enough output for a 3–4 m commercial ceiling over display or seating.
The beam is fixed — a 60° distribution that behaves like a general downlight. The source is an SMD board, which gives smooth, even light and a shallow body. SMD does not collimate into a narrow beam the way a COB block does, so treat the listed angles as the practical range.
The housing is aluminum, cast in our own workshop in Jiangmen.
75/90/120. The body measures Ø84×47H/Ø105×50H/Ø130×58H, so confirm plenum depth as well as aperture.
60°. Beam angle is selected per order, so a single project can take the same fitting at more than one angle.
Yes. Reflector finish, housing colour, chip holder, beam angle and driver are order options. Samples are normally ready in seven days.
Send the quantity, the beam angle and the finish you need. We will reply with price, lead time and a sample plan.
