99% 95% Al2O3 Alumina Ceramic Ring
Dense alumina rings for pump seals, insulators and wear seats, in 95% and 99% grades.
- MaterialAlumina ceramic
- SizeCustomized
- ShapeRing
Precision Ceramic Products
Seventeen standard ranges in zirconia, alumina, steatite, silicon carbide and silicon nitride, plus anything made to drawing.
All Seventeen Products
Every part below is photographed as it ships. Sizes outside the listed range are made to your drawing.
Zirconia Ceramic Plungers
Ground and polished zirconia plungers for dosing pumps and high pressure cleaners.
- MaterialZirconia
- ColorWhite, black
- ShapeCustom
Zirconia Ceramic Structural Parts
Made to drawing zirconia structural components for machinery, fibre optics and food equipment.
- MaterialZirconia
- ColorWhite, black
- ShapeCustom
Alumina Ceramic Disc For Water Pump
Lapped alumina discs for pump and tap cartridges that have to seal on water for years.
- MaterialAlumina ceramic
- ShapeRound or custom
- ColorWhite
Electrical Steatite Ceramic Bead
Bush, bead and fish spine steatite insulators for heating element leads.
- MaterialSteatite
- SizeCustom
- ShapeBush, bead, fish spine or custom
Steatite Ceramic Insulator
Sticks, strips, channels, bricks, knuckles, tiles and blocks for 1100°C electrical service.
- MaterialSteatite
- ShapeStick, strip, channel, brick, knuckle, tile, blocks
- UsageExcellent electrical insulators
Textile Machinery Ceramic Accessories
Alumina yarn guides and eyelets in standard D6*5 to D10*10 sizes or to your drawing.
- MaterialAlumina
- ColorPink, white, red, black
- SizeD6*5 D8*8 D4*3 D9*9 D10*10 or custom
Refractory Alumina Ceramic Tube
Furnace work tubes and thermocouple protection tubes rated to 1650°C.
- ColorWhite, pink
- Density3.85 g/cm3
- MONS' HardnessGrade 9
Al2O3 Alumina Ceramic Substrates
Substrates from 0.1mm thick, with in-house laser cutting, drilling, scribing and marking.
- ShapeCustom
- MaterialAlumina
- Density3.8 g/cm3
Precision Zirconia ZrO2 Ceramic Blade
Non-magnetic zirconia blades that hold an edge in wet and corrosive cutting.
- ColorWhite
- MOQ10 pcs
- MaterialZirconia
Si3N4 Silicon Nitride Ceramic Blade Knife
Black Si3N4 blades with the best all-round mechanical package in structural ceramics.
- MaterialSilicon Nitride
- ColorBlack
- MOQ10 pcs
Metallized Alumina Ceramic Ring
Mo/Mn metallized and Ni, Cu, Ag or Au plated rings ready to braze.
- MaterialAlumina (Al2O3)
- SizeCustom
- ColorWhite + metal
SIC Silicon Carbide Ceramic Ring Cylinder
Silicon carbide rings and cylinders held to ±0.005mm.
- ShapeCustom
- SizeCustom
- ApplicationIndustry ceramic
Industrial Ceramic Heating Ring And Strip
1 to 8 hole ceramic heating strips for flexible pad heaters up to 1650°C.
- Size1-8 hole
- ColorWhite, grey, pink
- Max Working Temp1650°C (3000°F)
Zirconia Ceramic Replacement Clipper Blade
18th and 25th replacement clipper blades with up to 5x the life of steel.
- Size18th, 25th
- ColorWhite, black, yellow, purple
- MOQ100 pcs
99% Al2O3 Alumina Ceramic Sheet Blank Plate
Injection moulded 99% alumina blanks and finished plates, MOQ 1 piece.
- SizeCustomized
- ColorWhite, black
- MOQ1 pcs
Zirconia Ceramic Rod
Centreless ground zirconia rod, custom size and colour, low MOQ.
- MaterialZirconia
- FeaturesHigh hardness, high strength, high temperature
- SizeCustomized
Browse By Material
Zirconia Ceramic Parts
- Zirconia Ceramic PlungersGround and polished zirconia plungers for dosing pumps and high pressure cleaners.
- Zirconia Ceramic Structural PartsMade to drawing zirconia structural components for machinery, fibre optics and food equipment.
- Zirconia Ceramic RodCentreless ground zirconia rod, custom size and colour, low MOQ.
Al2O3 Alumina Ceramic Parts
- 99% 95% Al2O3 Alumina Ceramic RingDense alumina rings for pump seals, insulators and wear seats, in 95% and 99% grades.
- Textile Machinery Ceramic AccessoriesAlumina yarn guides and eyelets in standard D6*5 to D10*10 sizes or to your drawing.
- Refractory Alumina Ceramic TubeFurnace work tubes and thermocouple protection tubes rated to 1650°C.
- Al2O3 Alumina Ceramic SubstratesSubstrates from 0.1mm thick, with in-house laser cutting, drilling, scribing and marking.
- 99% Al2O3 Alumina Ceramic Sheet Blank PlateInjection moulded 99% alumina blanks and finished plates, MOQ 1 piece.
Steatite Ceramic Parts
- Electrical Steatite Ceramic BeadBush, bead and fish spine steatite insulators for heating element leads.
- Steatite Ceramic InsulatorSticks, strips, channels, bricks, knuckles, tiles and blocks for 1100°C electrical service.
- Industrial Ceramic Heating Ring And Strip1 to 8 hole ceramic heating strips for flexible pad heaters up to 1650°C.
Metallized Ceramic Parts
SSIC And SIC Parts
Ceramic Blades And Knives
- Precision Zirconia ZrO2 Ceramic BladeNon-magnetic zirconia blades that hold an edge in wet and corrosive cutting.
- Si3N4 Silicon Nitride Ceramic Blade KnifeBlack Si3N4 blades with the best all-round mechanical package in structural ceramics.
- Zirconia Ceramic Replacement Clipper Blade18th and 25th replacement clipper blades with up to 5x the life of steel.
Machinery Ceramic Parts
More Parts From The Line
Frequently Asked Questions
What are the main products of your company?
We specialize in zirconia ceramic, alumina ceramic parts, steatite ceramic and SIC SI3N4 parts. Find a reliable precision ceramics manufacturer for you.
Can you OEM?
Yes. Our main business is OEM and ODM. Please show us your drawing.
What is the delivery time?
Sample delivery in 4-7 working days. It is 15-30 days if the goods are not in stock, according to the dimension and quantity.
Do you provide samples, is it free or extra?
Yes, we could offer the sample free of charge but do not pay the cost of freight.
What are your terms of payment?
Payment <= 1000USD, 100% in advance. Payment >= 1000USD, 50% T/T in advance, balance before shipment.
How do you ensure the quality of shipping products?
We follow standard packaging protocols to protect your products during transit and will provide photographic documentation of the packing and shipping process for your reference. In the event of transportation damage caused by non-human factors, we will promptly arrange a free replacement shipment to ensure your order is not affected.
Can the price be negotiated?
Of course, we will consider discounts for large-volume orders.
Can you guarantee the product?
Yes, we promise to provide quality assurance for all products, inspect according to your drawings and issue an inspection report. If you are not satisfied with our product quality or service, please feel free to give us feedback.
Cannot Find The Part You Need
Most of what we ship is made to a customer drawing rather than picked from this list. Send yours.