Zirconia Ceramic Plungers
Ground and polished zirconia plungers for dosing pumps and high pressure cleaners.
- MaterialZirconia
- ColorWhite, black
- ShapeCustom
Pumps Valves And Fluid Handling
Sealing and wear faces that keep their fit in water, slurry and solvent.
Industry Pain Points
- A steel plunger scores and loses its seal once abrasive particles get into the fluid.
- Cartridge discs have to seal on water for years without corroding.
- Stainless still corrodes in the wrong chemistry, and it is magnetic.
What Buyers Ask For
- Zirconia plungers with a smooth ground surface and 800 MPa flexural strength.
- Lapped alumina discs for pump and tap cartridges.
- Silicon carbide seal rings held to plus or minus 0.005mm for abrasive duty.
Suitable Products
Alumina Ceramic Disc For Water Pump
Lapped alumina discs for pump and tap cartridges that have to seal on water for years.
- MaterialAlumina ceramic
- ShapeRound or custom
- ColorWhite
SIC Silicon Carbide Ceramic Ring Cylinder
Silicon carbide rings and cylinders held to ±0.005mm.
- ShapeCustom
- SizeCustom
- ApplicationIndustry ceramic
Zirconia Ceramic Rod
Centreless ground zirconia rod, custom size and colour, low MOQ.
- MaterialZirconia
- FeaturesHigh hardness, high strength, high temperature
- SizeCustomized
How The Job Runs
From the first drawing to a repeat order, with the terms stated up front.
- EnquirySend the drawing, the quantity and the duty.
- Material CallWe confirm which family fits and why.
- Free Sample4 to 7 working days, freight paid by the buyer.
- Production15 to 30 days with an inspection report.
Materials Used Here
Zirconia Ceramic Parts
High toughness zirconia parts for wear surfaces that run against metal, fluid or fibre without picking up magnetism or corroding.
See the range
Machinery Ceramic Parts
Discs, pistons and wear parts that go straight into pumps, taps and textile machinery as a drop-in replacement for metal.
See the range
SSIC And SIC Parts
Silicon carbide rings, cylinders and seal faces for abrasive slurry and hot gas duty where alumina wears through too quickly.
See the rangeRelated Reading
- Zirconia Or Alumina Which To SpecifyToughness against hardness, cost and temperature
- Silicon Nitride And Silicon Carbide ComparedTwo hard ceramics with different jobs
- How A Ceramic Part Is MadePowder to finished part, step by step
- Sending A Drawing For A Ceramic PartWhat we need to quote accurately
Related Services
- Custom Ceramic Parts To DrawingOEM and ODM from your drawing, sample to volume
- Precision Grinding And PolishingFlat processing, precision processing and polishing
- Metallizing And BrazingMo/Mn metallizing with Ni, Cu, Ag or Au plating
- Laser Machining For SubstratesCutting, drilling, scribing and marking
Questions From This Sector
Do you have a standard part for this application?
Some, and they are listed on this page. Most of what we ship for this sector is made to a customer drawing.
Can we trial a small quantity first?
Yes. Samples are free of charge with freight paid by the buyer, and take 4 to 7 working days.
What lead time should we plan for production?
15 to 30 days if the goods are not in stock, according to the dimension and quantity.
Will you inspect against our drawing?
We inspect according to your drawings and issue an inspection report.
Talk To An Engineer About Pumps Valves And Fluid Handling
Send the drawing or describe the position the part sits in.