Industrial Ceramic Heating Ring And Strip
1 to 8 hole ceramic heating strips for flexible pad heaters up to 1650°C.
- Size1-8 hole
- ColorWhite, grey, pink
- Max Working Temp1650°C (3000°F)
Industrial Heating And Furnaces
Parts that sit inside the hot zone and stay dimensionally stable.
Industry Pain Points
- Metal supports creep and short out once an element runs hot enough to be useful.
- Thermocouples need protection from the furnace atmosphere without a thermal lag.
- Rapid heating and cooling cracks anything with the wrong expansion coefficient.
What Buyers Ask For
- Ceramic heating strips with 1 to 8 holes for flexible ceramic pad heaters.
- Alumina work tubes and thermocouple protection tubes rated to 1650C.
- Steatite beads and bushings on the lead-out side of the element.
Suitable Products
Refractory Alumina Ceramic Tube
Furnace work tubes and thermocouple protection tubes rated to 1650°C.
- ColorWhite, pink
- Density3.85 g/cm3
- MONS' HardnessGrade 9
Electrical Steatite Ceramic Bead
Bush, bead and fish spine steatite insulators for heating element leads.
- MaterialSteatite
- SizeCustom
- ShapeBush, bead, fish spine or custom
Steatite Ceramic Insulator
Sticks, strips, channels, bricks, knuckles, tiles and blocks for 1100°C electrical service.
- MaterialSteatite
- ShapeStick, strip, channel, brick, knuckle, tile, blocks
- UsageExcellent electrical insulators
How The Job Runs
From the first drawing to a repeat order, with the terms stated up front.
- EnquirySend the drawing, the quantity and the duty.
- Material CallWe confirm which family fits and why.
- Free Sample4 to 7 working days, freight paid by the buyer.
- Production15 to 30 days with an inspection report.
Materials Used Here
Steatite Ceramic Parts
Talc based steatite beads, strips and insulators for electrical heating assemblies where dielectric strength matters more than toughness.
See the range
Al2O3 Alumina Ceramic Parts
95% and 99% alumina rings, tubes, substrates and plates for insulation, wear and high temperature service up to 1650C.
See the rangeRelated Reading
- Zirconia Or Alumina Which To SpecifyToughness against hardness, cost and temperature
- Alumina 95% Or 99% PurityWhat the extra four percent changes
- Steatite For Electrical InsulationWhy heating elements still use talc ceramic
- How A Ceramic Part Is MadePowder to finished part, step by step
Related Services
- Custom Ceramic Parts To DrawingOEM and ODM from your drawing, sample to volume
- Precision Grinding And PolishingFlat processing, precision processing and polishing
- Metallizing And BrazingMo/Mn metallizing with Ni, Cu, Ag or Au plating
- Laser Machining For SubstratesCutting, drilling, scribing and marking
Questions From This Sector
Do you have a standard part for this application?
Some, and they are listed on this page. Most of what we ship for this sector is made to a customer drawing.
Can we trial a small quantity first?
Yes. Samples are free of charge with freight paid by the buyer, and take 4 to 7 working days.
What lead time should we plan for production?
15 to 30 days if the goods are not in stock, according to the dimension and quantity.
Will you inspect against our drawing?
We inspect according to your drawings and issue an inspection report.
Talk To An Engineer About Industrial Heating And Furnaces
Send the drawing or describe the position the part sits in.