LED sign modules, strip and neon flex, moulded and potted in Shenzhen since 2012 Mon-Fri 09:00-17:00, Sat-Sun 10:00-18:00 GMT+8 [email protected] +86 134 2874 2324
LEDjds
  1. Home
  2. Products
  3. Light Box Manufacturers
Side-Emitting LED Modules manufactured by Shenzhen Jinda Shun Technology Co., Ltd.
Who We Supply

Light Box Manufacturers

Makers of single- and double-sided illuminated boxes, where the face has to read as one even surface and the depth available is fixed by the frame.

Request A Quote See The Products

Where It Goes Wrong

  • A shallow box lit from behind that shows every module as a dot.
  • Both edges wired when the published depth band allowed one.
  • An asymmetric optic installed in the wrong orientation.
  • Light escaping out of the edge rather than crossing the face.
  • A face material specified before the module, so the diffusion never matches the beam.

What These Buyers Ask For

  • Beam angles published for both mounting orientations
  • Separate depth bands for single-sided and double-sided boxes
  • Lumens per piece so the edge pitch can be calculated
  • Backing tape specified as part of the product, not sourced separately
  • IP ratings that survive a sealed box that still breathes
Recommended Products

The Products That Apply Here

JDS-7420V, 3 W side-emitting module, 300 lm per piece, IP67, for single
Bezel-Free Series 7420V

JDS-7420V

3 W side-emitting module, 300 lm per piece, IP67, for single-sided boxes 50 to 100 mm and double-sided boxes 60 to 200 mm deep.

See the specification
JDS-4035V, 120 lm/W side-emitting module at 3 W and 360 lm per piece, I
Bezel-Free Series 4035V

JDS-4035V

120 lm/W side-emitting module at 3 W and 360 lm per piece, IP67, eight pieces per metre.

See the specification
JDS-3828V, 1.5 W side-emitting module, 140 lm per piece, IP67, for ligh
Bezel-Free Series 3828V

JDS-3828V

1.5 W side-emitting module, 140 lm per piece, IP67, for light boxes where 3 W per piece would over-light the face.

See the specification
JDS-3939B LED sign module, 39 x 39 x 9 mm
Bezel-Free Series 3939B

JDS-3939B

Square four-lens DC module, 245 lm per piece, IP68, for deep signs 120 to 200 mm behind the face.

See the specification
JDS-4543B LED sign module, 45 x 43 x 7 mm
Bezel-Free Series 4543B

JDS-4543B

Four-lens square module, 480 lm per piece at up to 4 W, IP67, the brightest single module published here.

See the specification

Typical Scenarios

  • Shallow single-sided boxes 50 to 100 mm deep
  • Double-sided projecting boxes 60 to 200 mm deep
  • Illuminated panels built into shop joinery
  • Menu boards and directory panels

How We Supply

  • Side-emitting models supplied with 3M backing tape as specified
  • Published module density so the edge run can be cut to length
  • Colour options selected per order
  • Carton quantities matched to how panels are batched on the floor

Related Programmes

Installed

Photographs From This Kind Of Site

White illuminated channel letters under fabrication, lit by LED sign modules
Project Photograph

Double-Sided Projecting Light Box

A projecting box that has to be read from both sides, where lighting each face separately doubles the module count, the wiring and the number of things that can fail.

Read what was specified

Guides For This Kind Of Buyer

Questions

Light Box Manufacturers Questions

Can a 200 mm double-sided box really be lit from the edge?
That is the published band for the side-emitting models: 60 to 200 mm double-sided. Above it, the face starts to fall off in the middle.
Which side-emitting model is brightest?
The 4035V, at 360 lm per piece and 120 lm/W. The 7420V gives 300 lm at 100 lm/W from the same 3 W.
What if the box is deeper than 200 mm?
Then it is a backlit problem, not an edge-lit one. The 3939B publishes a 120 to 200 mm band and the 3636RGBW goes above 150 mm.

Talk Through A Scheme

Send the positions, the mounting available and the quantity. A shortlist with specifications comes back by email.

Request A Quote Message Us On WhatsApp