Double Bowl Sink Strainer And Siphon Kit With Flexible Pipes
Both bowls, one outlet, no rigid pipe to cut on site
What This Product Is And Who It Is For
A complete waste kit for a double bowl sink: two stainless steel strainer bodies, an overflow take-off and flexible siphon pipework joining into one outlet.
It is bought by sink brands and distributors who want the sink and its waste to arrive as one saleable package.
Flexible pipe means the installer does not have to cut and glue rigid waste on site.
Why Buyers Specify It
Fits the cabinet as found
Flexible pipe absorbs the difference between where the sink drains and where the wall outlet actually is.
One outlet from two bowls
Both strainers join before the trap, so only one connection goes to the stack.
Sold with the sink
A matched waste kit removes the most common reason a sink goes back to the counter.
304 strainer bodies
The part that sits in standing water is the part that has to be 304.
What It Fixes In A Buying Programme
Rigid waste has to be cut on site
Flexible pipe removes the cutting and the guesswork.
Mismatched wastes leak at the bowl seat
A kit matched to the sink seats correctly first time.
Two bowls, two outlets, no room
Both bowls join before the trap.
Who It Is For
- Sink brands bundling a waste kit with every double bowl
- Distributors selling spares and replacement kits
- Kitchen retailers who want one box per sink
Technical Features
- Two strainer bodies with baskets
- Overflow take-off connection
- Flexible siphon pipes
- Single outlet to the waste stack
- Rubber seals and backnuts supplied
Where It Ends Up
Double bowl kitchen sinks
The intended pairing for any of our two-bowl sinks.
Replacement and refurbishment
Fits where the old rigid waste no longer lines up.
Flat-pack kitchen packages
Ships in the same carton as the sink.
Utility rooms
Same kit works behind a utility double bowl.
Specification Table
Every figure we can evidence for this waste kit is listed below. Where a dimension on the double bowl sink strainer and siphon kit wi… is set by your own order, or has not been measured and documented yet, the row reads TBC instead of a plausible-looking number.
| Product type | Double bowl waste and siphon kit |
|---|---|
| Strainers | Two, stainless steel bodies |
| Overflow | Take-off connection included |
| Pipework | Flexible |
| Outlet | Single connection |
| Strainer diameter | TBC — confirm on enquiry |
| Outlet diameter | TBC — confirm on enquiry |
| Pipe length | TBC — confirm on enquiry |
Materials
Strainer bodies and baskets in 304 stainless steel — the part permanently in standing water.
Pipework is flexible plastic with rubber seals. Exact material grades are stated per order.
Customisation Options
- Strainer and outlet diameter to your market's standard
- Pipe length and number of bends
- With or without an overflow take-off
- Packed loose, or boxed with a matching sink
How It Is Made
Form the strainer body
The strainer is formed and the thread is cut for the backnut.
Punch the basket
Basket perforation is punched and deburred so it does not catch.
Assemble the kit
Strainers, seals, backnuts, overflow take-off and flexible pipe are packed as one set.
Check the set
Kits are checked against a parts list before the carton is closed.
Quality Control
- Every kit is checked against the parts list — a missing seal is a returned sink.
- Thread fit between strainer and backnut is tested on a sample from each batch.
- Basket perforation is checked for burrs.
Certifications
No certification mark is claimed for the double bowl sink strainer and siphon kit wi… anywhere on this site, because we state only what a document can back up. If your market needs WaterMark, cUPC, CE or a material certificate against this waste kit, raise it before the order and we will reply in writing on what is available for the double bowl sink strainer and siphon kit wi….
Compared With A Rigid Waste Kit
The alternative is a rigid plastic waste assembly cut to length on site.
| Aspect | Double Bowl Sink Strainer And Siphon Kit Wi… | A Rigid Waste Kit |
|---|---|---|
| Installation | Flexes to the outlet | Cut and glued on site |
| Skill required | Low | Moderate |
| Refit after a leak | Unclip and reseat | Cut and reglue |
Use Guide
Step 1
Seat the strainer on fresh sealant or the supplied gasket, not on the old one.
Step 2
Hand-tighten the backnut and then check it after the first fill.
Step 3
Keep the flexible pipe falling towards the outlet — do not let it sag into a trap of its own.
Step 4
Clear the baskets rather than pushing waste through.
Double Bowl Sink Strainer And Siphon Kit Wi… — Frequently Asked Questions
Which sink sizes does it fit?
It fits any double bowl with the standard strainer opening. Tell us the opening diameter used in your market and we will match it.
Is the trap included?
The siphon is part of the kit. Confirm the outlet diameter your plumbing uses so the right connection goes in the box.
Can it be co-packed with the sink?
Yes — that is how most of our customers buy it.
Products And Reading That Go With This One
The waste kit that ships in the same box as the sink
View product
Two bowls, your split, one fabricated body
View product
The volume double bowl, with the ledge and accessories buyers actually ask for
View productStainless steel does not rust, but things left on it do. Almost every complaint about a stainless…
Read the guideMost custom sink quotations stall for the same reason: the enquiry gives a length and a width and…
Read the guideStock that moves, with the waste kit already in the box
See the applicationOne factory behind a whole stainless range
See the applicationQuote Double Bowl Sink Strainer And Siphon Kit Wi…
Send the quantity, the steel grade, the finish and any dimensions you need changed. If you are replacing an existing supplier, a sample is faster than a drawing.