Undermount Sinks
Bowls fabricated to the worktop template you already have
Undermount sinks are fixed beneath the worktop, so the stone runs uninterrupted into the bowl.
They are specified with engineered stone and solid surface, where the fabricator is working to a template rather than to a catalogue size.
Our undermount bowls are handmade — cut, folded, welded and dressed — which is what allows a tight corner radius and a non-standard depth.
Every Undermount Sink We Make
Made to order, so the dimensions below are a starting point rather than a fixed list.
Built to the cut-out you already have, not the other way round
View product
Two bowls, your split, one fabricated body
View product
The bowl for the 400 mm cabinet nobody makes a sink for
View productWhat Buyers Come To Us To Fix
Undermount work is template-driven, so the problems are dimensional.
The template does not match any stock sink
We fabricate to the drawing instead of asking you to move the cut-out.
Central drains fill the cupboard with pipework
Rear-offset drains leave the shelf usable.
Mounting hardware arrives wrong for the worktop
Clips and lugs are supplied to suit stone, solid surface or timber — state which.
What Is Different About Our Undermount Sinks
Handmade fabrication
Welded and dressed corners, not a press tool radius.
Drawing-driven production
Length, width, depth, radius and drain position are all order inputs.
Compact sizes available
Bowls for 400 and 450 mm cabinets that stock ranges do not cover.
Matched waste kits
Strainers and flexible siphon kits produced in the same factory.
Who Buys This Range
- Worktop fabricators working to a fixed template
- Bespoke kitchen makers
- Apartment developers repeating one bowl across many units
Where It Is Used
- Residential Developers And Contractors — one specification, several hundred kitchens, no surprises
- Plumbing Wholesalers And Distributors — stock that moves, with the waste kit already in the box
Undermount Sinks And The Parts That Go With Them
Photography of production items from this category and the accessories specified alongside them.
Where To Go Next
The dimensions come from your drawing, not from our catalogue
See the processYour brand on the carton, your drawing on the shop floor
See the processA pressed sink is drawn from a sheet in one operation on a die. A handmade sink is cut, folded, welded and…
Read the guideMost custom sink quotations stall for the same reason: the enquiry gives a length and a width and nothing…
Read the guideUndermount Sinks — Frequently Asked Questions
What do you need to quote an undermount bowl?
A dimensioned drawing or the worktop template, plus the steel grade, drain position and quantity.
Can you match a sink we already stock?
Usually. Send a sample or a drawing of the sink you are replacing.
Is mounting hardware included?
Yes, supplied to suit the worktop material you tell us about.
Get A Quote For Undermount Sinks
Send dimensions or a drawing, the steel grade and the quantity. We will tell you where a dimension will not hold before you commit to it.