Single Bowl Sink Strainer And Drainer Kit With Flexible Pipe
The waste kit that ships in the same box as the sink
What This Product Is And Who It Is For
A single bowl waste kit: one stainless steel strainer body with basket, an overflow take-off and a flexible siphon pipe.
It is the single-bowl version of our double kit and is bought by the same brands and distributors for co-packing.
The flexible pipe lets one kit serve cabinets with the outlet in different places.
Why Buyers Specify It
One kit covers many cabinets
Flexible pipe means the outlet position does not have to be standard.
Fewer parts to lose
The strainer, seals, backnut and pipe arrive as one set.
304 where it matters
The strainer sits in standing water, so it is made in 304 rather than plated steel.
Faster fitting
No cutting, no solvent weld, no waiting for it to cure.
What It Fixes In A Buying Programme
Wastes and sinks come from different suppliers
Buying both here means the seat and the strainer match.
Site cutting adds installation time
Flexible pipe is fitted by hand.
Plated strainers corrode in standing water
A 304 strainer does not.
Who It Is For
- Brands co-packing a waste with every single bowl sink
- Distributors carrying replacement waste kits
- Retailers selling sinks as a complete package
Technical Features
- Single strainer body with basket
- Overflow take-off connection
- Flexible siphon pipe
- Rubber seals and backnut supplied
- 304 stainless steel strainer
Where It Ends Up
Single bowl kitchen sinks
The default pairing for our single-bowl range.
Compact and prep sinks
Short runs where a rigid waste has nowhere to go.
Utility and cloakroom points
Simple installation with no site plumbing skill required.
Replacement sales
A stocked spare for a failed original waste.
Specification Table
Every figure we can evidence for this waste kit is listed below. Where a dimension on the single bowl sink strainer and drainer kit w… is set by your own order, or has not been measured and documented yet, the row reads TBC instead of a plausible-looking number.
| Product type | Single bowl waste and siphon kit |
|---|---|
| Strainer | One, stainless steel body |
| Overflow | Take-off connection included |
| Pipework | Flexible |
| Strainer diameter | TBC — confirm on enquiry |
| Outlet diameter | TBC — confirm on enquiry |
| Pipe length | TBC — confirm on enquiry |
Materials
304 stainless steel strainer body and basket.
Flexible plastic pipework with rubber seals; grades stated per order.
Customisation Options
- Strainer and outlet diameter to market standard
- Pipe length
- With or without overflow take-off
- Loose packed or co-packed with a sink
How It Is Made
Form and thread
The strainer body is formed and threaded for the backnut.
Punch and deburr
The basket is perforated and deburred.
Kit assembly
Strainer, seals, backnut, overflow take-off and pipe are packed together.
Parts-list check
Each kit is checked against the parts list before sealing.
Quality Control
- Parts-list check on every kit.
- Sample thread fit test per batch.
- Basket deburring inspected by hand.
Certifications
No certification mark is claimed for the single bowl sink strainer and drainer kit w… anywhere on this site, because we state only what a document can back up. If your market needs WaterMark, cUPC, CE or a material certificate against this waste kit, raise it before the order and we will reply in writing on what is available for the single bowl sink strainer and drainer kit w….
Compared With The Double Bowl Kit
The same range covers single and double bowls.
| Aspect | Single Bowl Sink Strainer And Drainer Kit W… | The Double Bowl Kit |
|---|---|---|
| Strainers | One | Two |
| Outlets to the stack | One | One, after both bowls join |
| Typical sink | Single bowl | Double bowl |
Use Guide
Step 1
Fit the strainer on the supplied gasket, not on a reused one.
Step 2
Hand-tighten and re-check after the first fill.
Step 3
Keep the flexible pipe falling towards the outlet.
Step 4
Empty the basket rather than pushing debris through.
Single Bowl Sink Strainer And Drainer Kit W… — Frequently Asked Questions
Will it fit a sink we already sell?
If the strainer opening matches, yes. Send the opening diameter and we will confirm.
Is the strainer 304?
Yes. The strainer body and basket are 304 stainless steel.
Can we order it printed with our brand?
Packaging can be printed to your artwork. Ask for the carton template.
Products And Reading That Go With This One
Both bowls, one outlet, no rigid pipe to cut on site
View product
Built to the cut-out you already have, not the other way round
View product
One deep bowl, a drilled ledge, and a finish choice that changes the price point
View productStainless steel does not rust, but things left on it do. Almost every complaint about a stainless…
Read the guideThe three mounting types are not three styles of the same product. They demand different worktops,…
Read the guideStock that moves, with the waste kit already in the box
See the applicationOne specification, several hundred kitchens, no surprises
See the applicationQuote Single Bowl Sink Strainer And Drainer Kit W…
Send the quantity, the steel grade, the finish and any dimensions you need changed. If you are replacing an existing supplier, a sample is faster than a drawing.