Double Bowl Customizable Stainless Steel Undermount Sink
Two bowls, your split, one fabricated body
What This Product Is And Who It Is For
A handmade double bowl undermount sink with a low divider between the bowls, fabricated to the split and depth you specify.
It is used in kitchens that still wash by hand and want washing and rinsing separated under a stone worktop.
Equal, 60/40 and 70/30 splits all come from the same fabrication route.
Why Buyers Specify It
Wash on one side, rinse on the other
The divider keeps soapy and clean water apart without a second cut-out.
Low divider, long items still fit
Dropping the divider below the rim lets a tray or a long pan lie across both bowls.
Your split, not a standard one
Equal, 60/40 or 70/30 is a fabrication decision, so a range can carry all three.
Continuous worktop line
Undermounting keeps the stone running straight into both bowls.
What It Fixes In A Buying Programme
Fixed catalogue splits do not suit every kitchen
The split is set per order.
Full-height dividers block long pans
The divider is dropped below the rim.
Rimmed double sinks are hard to clean around
Undermounting removes the rim.
Who It Is For
- Kitchen brands needing three bowl splits without three tooling sets
- Contractors buying one size in project volume
- Worktop fabricators matching an existing template
Technical Features
- Two bowls with a low central divider
- Handmade, welded and dressed corners
- Equal, 60/40 or 70/30 split
- Rear-offset drains
- Brushed interior finish
Where It Ends Up
Family kitchens
Hand washing is still normal in most of the world.
Apartment projects
One sink specification repeated across units.
Staff kitchens and tea points
Two bowls handle crockery and food waste separately.
Bar back-of-house
Glass washing on one side, rinsing on the other.
Specification Table
Every figure we can evidence for this undermount sink is listed below. Where a dimension on the double bowl customizable stainless steel un… is set by your own order, or has not been measured and documented yet, the row reads TBC instead of a plausible-looking number.
| Product type | Undermount kitchen sink |
|---|---|
| Bowl configuration | Double bowl, low divider |
| Split options | Equal, 60/40, 70/30 |
| Construction | Handmade, welded and dressed |
| Material | 304 stainless steel (202 / 201 on request) |
| Overall size | Made to order — TBC — confirm on enquiry |
| Bowl depth | Made to order — TBC — confirm on enquiry |
| Divider height | TBC — confirm on enquiry |
| Steel thickness | TBC — confirm on enquiry |
Materials
Fabricated from stainless sheet, 304 as standard for undermount kitchen use.
Mounting hardware supplied to suit the worktop material stated on the order.
Customisation Options
- Bowl split and divider height
- Overall length, width and depth
- Drain positions, one per bowl or a shared waste route
- Corner radius and optional tap ledge
How It Is Made
Fix the split
Bowl widths and divider height are set from your drawing before cutting.
Cut and fold
Both bowls are cut from sheet and folded as one assembly where the design allows.
Weld and dress
Corners and the divider joint are welded, ground and polished.
Brush and fit lugs
Interiors are brushed and mounting lugs are attached.
Quality Control
- Both bowls are water-tested independently.
- Divider height is measured against the order drawing.
- Weld seams either side of the divider are inspected before brushing.
Certifications
No certification mark is claimed for the double bowl customizable stainless steel un… anywhere on this site, because we state only what a document can back up. If your market needs WaterMark, cUPC, CE or a material certificate against this undermount sink, raise it before the order and we will reply in writing on what is available for the double bowl customizable stainless steel un….
Compared With A Single Large Bowl
The other way to use the same cut-out length is one large bowl.
| Aspect | Double Bowl Customizable Stainless Steel Un… | A Single Large Bowl |
|---|---|---|
| Washing by hand | Separated wash and rinse | One bowl, needs a washing-up bowl |
| Oven trays | Only across a low divider | Lie flat |
| Food waste handling | Second bowl keeps it clear | Shares the bowl |
Use Guide
Step 1
Decide the split against the dishwasher position before ordering.
Step 2
Send the worktop template with the enquiry.
Step 3
Use the smaller bowl for rinsing and food waste.
Step 4
Wipe both bowls dry after use to keep the brushed grain even.
Double Bowl Customizable Stainless Steel Un… — Frequently Asked Questions
Can the divider be full height?
Yes, if you want the bowls fully separated. The low divider is our default because it lets long pans lie across.
Do both bowls need their own waste?
That is the normal arrangement and it is what we build unless your plumbing drawing says otherwise.
What splits do you produce?
Equal, 60/40 and 70/30 are routine. Anything else is a drawing question, not a tooling one.
Products And Reading That Go With This One
Built to the cut-out you already have, not the other way round
View product
The volume double bowl, with the ledge and accessories buyers actually ask for
View product
Both bowls, one outlet, no rigid pipe to cut on site
View productThe three mounting types are not three styles of the same product. They demand different worktops,…
Read the guideA pressed sink is drawn from a sheet in one operation on a die. A handmade sink is cut, folded,…
Read the guideOne specification, several hundred kitchens, no surprises
See the applicationStock that moves, with the waste kit already in the box
See the applicationQuote Double Bowl Customizable Stainless Steel Un…
Send the quantity, the steel grade, the finish and any dimensions you need changed. If you are replacing an existing supplier, a sample is faster than a drawing.