FT0365 RF Weather Station
The FT0365 RF Weather Station is a complete, integrated system with a console and outdoor sensor that communicates over 433MHz. It measures outdoor temperature and humidity, wind speed and direction, barometric pressure, rainfall, UV and sunlight levels, and provides weather fore
What This Model Is For
The FT0365 RF Weather Station is a complete, integrated system with a console and outdoor sensor that communicates over 433MHz. It measures outdoor temperature and humidity, wind speed and direction, barometric pressure, rainfall, UV and sunlight levels, and provides weather forecasts and moon phase data. The outdoor sensor updates every 16 seconds and transmits up to 100m in open air, making it suitable for standalone home or garden use without a gateway. Solar assist reduces battery drain during daylight hours.
- All core weather data from one outdoor sensor, reducing mounting points and wiring
- 16 second update interval preserves gust and rapid change events
- 433MHz transmission reaches 100m in open air without a gateway
- Solar panel supplements power, extending battery life in sunny conditions
- Integrated sensor shares the same protocol as other UCTECH RF products
Where It Is Used
- Home weather displays for consumers who want detailed local conditions
- Garden and rooftop monitoring for horticultural and landscape management
- Distributors adding a full weather station to a retail line without RF development
- Small farms needing rainfall and wind data without a wired system
- Schools and visitor centres using the forecast and moon phase for educational displays
Who It Is For
- Consumer electronics brands launching an own-label weather station
- Distributors replacing a sensor that failed after one season due to battery drain
- Agricultural suppliers bundling weather data with irrigation or greenhouse controls
- Integrators who need a battery-powered sensor for sites where cabling is impractical
- Hobbyists and DIY builders using the console as a base for custom projects
Problems It Solves
- Sensors that fail after one winter due to unmanaged battery drain
- RF links that drop out beyond 30m without a repeater or gateway
- Weather stations that report averaged wind speed and miss short bursts
- Console systems that require separate sensors for each data type
- Projects that need a full weather suite but lack in-house RF or firmware teams
Technical Features
- Outdoor temperature and humidity sensing with high/low alarms
- Wind speed and direction measured every 16 seconds with icon and numeric display
- Barometric pressure in hPa, mmHg, or inHg with absolute or relative mode
- Rainfall data with 24-hour, weekly, monthly and total accumulation
- UV and sunlight index displayed in Lux, fc, or W/m² with high alarm
- Weather forecast based on pressure trends and historical data
- Moon phase and time/date display with dual alarm settings
- Manual calibration for all sensor inputs including wind speed and rainfall
- Solar panel as auxiliary power, not a battery charger
- Wall mount or desk stand console with adjustable backlight
Specifications
Values taken from our own product documentation. Anything we cannot verify is marked rather than estimated.
| Outdoor Temperature Range | -40 to +60 degrees C, plus or minus 0.3 degrees C |
|---|---|
| Outdoor Humidity Range | 1 to 99 percent RH, plus or minus 3 percent |
| Indoor Temperature Range | 0 to +60 degrees C, plus or minus 1 degree C |
| Indoor Humidity Range | 10 to 99 percent RH, plus or minus 5 percent |
| Barometric Pressure Range | 300 to 1100 hPa, plus or minus 3 hPa |
| Rain Volume | 0 to 9999 mm, resolution 0.3 mm below 1000 mm, 1 mm above 1000 mm |
| Rain Accuracy | Under 15 mm: plus or minus 1 mm; 15 to 9999 mm: plus or minus 7 percent |
| Wind Speed Range | 0 to 50 m/s, 2-10 m/s: plus or minus 0.3 m/s; 10-50 m/s: plus or minus 10 percent |
| Wind Direction | 0 to 360 degrees, plus or minus 10 degrees |
| Sunlight Index | 0 to 200,000 Lux, plus or minus 15 percent |
| UV Index | 1 to 15+, plus or minus 1 level |
| Transmission Interval | 16 s |
| Transmission Range | 100 m open area, around 30 m in most conditions |
| Transmission Frequency | 433 MHz |
| Console Power | 3 x AAA 1.5V alkaline or lithium batteries, not included |
| Outdoor Sensor Power | 3 x AA 1.5V alkaline or lithium batteries, not included |
| Solar Panel | Auxiliary power supply, does not charge batteries |
| Console Dimensions | 165 x 135 x 18 mm (6.5 x 5.32 x 0.71 inch) |
| Outdoor Sensor Dimensions | Not specified in source text |
Materials and Construction
- Moulded plastic housing for the outdoor sensor
- Integrated solar panel on the outdoor sensor body
- Weather sealed battery compartment sized for 3 x AA cells
How It Is Made
Sensor sub-assemblies are populated and soldered on our own assembly line
Outdoor sensor housing is sealed and tested for water resistance
Every unit undergoes a final ageing test before packing
Console and sensor are paired during final assembly
Quality Control
- Rainfall and waterproof testing on the assembled outdoor sensor
- Constant temperature and humidity chamber runs covering the -40 to +60 degrees C range
- Vibration testing to simulate transport and mast loading
- Smog ageing to verify housing and seal integrity
- Final ageing test on every unit before packaging
Customisation Options
- Own-label printing and retail packaging
- Console firmware configured to match a customer’s existing UCTECH-protocol display
- Alternative battery and solar configurations on request
- User manual and quick start guide in the destination language
Compared With the Alternatives
vs Separate indoor and outdoor units with different protocols
One integrated sensor reduces mounting complexity and avoids protocol mismatch
vs Wired weather stations requiring cable runs
No trenching or conduit needed, but requires battery changes in low-light areas
vs LoRa-based sensors in the FT0310 or FT0832 range
433MHz is lower cost and sufficient for single-site use; LoRa is better for large or obstructed sites
Use Guide
- Mount the outdoor sensor clear of obstructions, ideally 2m above ground
- Align the sensor direction mark to true north before securing the mast
- Use lithium batteries in cold climates to maintain performance below freezing
- Pair the sensor with the console before mounting the outdoor unit
- Check the sensor housing and wind cups for debris at the start of each season
FT0365 RF Weather Station Questions
What is the real range between the sensor and the console
100m in open air. Through walls, trees, or a roof, expect around 30m, which covers a typical house and garden.
How often does it update
Every 16 seconds, which captures gusts and rapid changes without averaging them out.
Does the solar panel charge the batteries
No. The solar panel supplies power during daylight and reduces battery drain, but the batteries remain the primary power source.
Can it work with a console we already sell
If your console uses the UCTECH 433MHz protocol, yes. Send us the model number and we will confirm compatibility.
What is the lead time and minimum order
Tell us your target ship date and order quantity, and we will confirm lead time and MOQ by email.
Which certifications does it carry
TBC. Ask us for the current certificate set for your destination market before placing the order.
Related Products
FT037B Weather Station
Integrated outdoor sensor with 433MHz RF avoids separate wiring and site cabling
View Specifications →
FT0214 Weather Station Wind Gauge
One console handles wind and up to eight temperature and humidity sensors, reducing the need for multiple devices
View Specifications →
FT0350 RF Weather Station
One outdoor sensor with integrated solar panel reduces battery drain and extends operational life
View Specifications →
FT0342 RF Weather Station
Integrated outdoor sensor with solar assist reduces battery replacement frequency
View Specifications →
FT-0818 RF Weather Station
433MHz radio link reaches 100 meters in open air without a gateway or cabling
View Specifications →
FT-0814 RF Weather Station
433MHz transmission reaches 100 meters in open air, covering most residential and garden sites
View Specifications →Request a Quote for the FT0365 RF Weather Station
Tell us the quantity, the destination market and whether you need own-label printing. We will confirm pricing, pairing and lead time in writing.