Multi-Point Temperature and Humidity
Eight Rooms One Console One Alarm Set
The moment you need more than one reading, single-point thermometers stop scaling. Somebody has to walk round and read them, and nothing raises an alarm at three in the morning. Our multi-channel wireless sensors put 3 or 8 points on one console, each with its own high and low alarm and its own min and max record.
How It Runs Step by Step
List the Points
Every room, cabinet, store or shed you need on the display, and for each one whether you need air temperature, humidity, or a probe reading inside stock.
Size the Channel Count
3 channel sensors suit a small property. The 8 channel probe and thermo-hygrometer sensors cover a cold store, a plant room set or a catering kitchen from one console.
Check the Radio Path
Metal-faced insulated panel, plant rooms and thick masonry all cut 433MHz range hard. Tell us the construction and we will advise on console placement before you order.
Set Alarms Per Channel
High and low thresholds on temperature and humidity, so a channel that drifts overnight raises an alarm rather than being discovered in the morning.
Calibrate on Site
Consoles with manual calibration let you offset temperature, humidity and pressure in place, so a drifting channel does not mean returning the unit.
Keep the Records
Min and max records hold with manual clearing or automatic 24 hour clearing, depending on the model and how you want to run it.
Products Used in This Solution
FT007TH Thermo-hygrometer Sensor
Supports up to 8 sensors on one channel, reducing the need for multiple consoles or RF bands
View Specifications →
FT007TP Probe Thermometer Sensor
Eight independent temperature channels allow monitoring of multiple points with one sensor unit
View Specifications →
FT-0170 Wireless Thermo-hygrometer with 3 Channels
Three independent outdoor sensor channels allow monitoring of different zones without additional receivers
View Specifications →
FT016TH Thermo-Hygrometer Sensor
Measures temperature and humidity in one unit, reducing the need for separate sensors
View Specifications →
FT0406 Thermo-Hygrometer
Measures indoor temperature and humidity with accuracy suitable for home and office environments
View Specifications →Multi-Point Temperature and Humidity Questions
What is the maximum number of channels
Eight on the multi-channel probe and thermo-hygrometer sensors. Send us your point list and we will confirm the right console and sensor combination.
Air sensor or probe sensor
Probe where the temperature of the stock matters, air where the room condition matters. Most cold store installations use both.
Will it work through insulated panel
Metal-faced panel is the hardest case for 433MHz. Plan for the low end of the range figure and talk to us about placement first.
Can we export the readings
Consoles hold min and max records on the display. For anything beyond that, email [email protected] describing what your system needs.
Are the sensors paired before shipping
Yes, so installation is mount and go. Tell us the channel assignment you want when you order.
Put This in Front of Our Engineers
Send the model numbers, quantities and the market. We answer in writing, including where the answer is that our hardware is not the right fit.