Cold Chain and Storage
Multi-Point Temperature and Humidity With Alarms
Cold rooms, ripening rooms and dry stores fail quietly. A door left open or a compressor that stops overnight costs stock, and nobody finds out until the morning. UCTECH multi-channel wireless thermo-hygrometers and probe thermometers put every point on one console with high and low alarms, without pulling cable through insulated panel.
What Goes Wrong Today
- One thermometer per room, read manually, recorded on paper
- Cable runs that cannot pass through insulated panel without compromising it
- No alarm when a room drifts overnight
- Probe thermometers that lose calibration and nobody notices
- Min and max history lost as soon as somebody presses reset
What the Job Actually Needs
- Up to 8 channels on one console so every room is visible at once
- Probe sensors for readings inside stock rather than in the air
- High and low alarms on temperature and humidity
- Min and max records with manual or automatic 24 hour clearing
- Manual calibration so a drifting channel can be corrected on site
Typical Installations
- Cold rooms and freezers monitored from a single office console
- Ripening and curing rooms where humidity matters as much as temperature
- Dry stores and archives tracking dew point
- Catering and food service fridges on 8 channel probe thermometers
- Warehouse zones where one console covers several bays
How We Take an Order Through
List the monitoring points and whether each needs an air or probe sensor
We size the channel count and confirm the console model
Set alarm thresholds per channel during commissioning
Sensors paired at the factory so installation is mount and go
Every unit ageing tested; chambers cover the specified temperature range
Products for This Industry
FT007TP Probe Thermometer Sensor
Eight independent temperature channels allow monitoring of multiple points with one sensor unit
View Specifications →
FT007TH Thermo-hygrometer Sensor
Supports up to 8 sensors on one channel, reducing the need for multiple consoles or RF bands
View Specifications →
FT0405 Probe Thermometer
Measures both indoor air and probe temperature across a wide range from -40 to +60 degrees C
View Specifications →
FT0422 Probe Thermometer
Measures both indoor air and probe temperature on the same display
View Specifications →
FT0406 Thermo-Hygrometer
Measures indoor temperature and humidity with accuracy suitable for home and office environments
View Specifications →
FT0424 Wireless Thermometer
Measures indoor, fridge, and freezer temperatures with one console, reducing the need for multiple devices
View Specifications →Ranges to Browse
Cold Chain and Storage Questions
How many points can one console monitor
The 8 channel probe and thermo-hygrometer sensors put eight points on one display. Smaller consoles run 3 channels. Send us your point list.
Do the consoles alarm
Models with Hi Lo alarm support raise alarms on temperature and humidity per channel. Confirm the exact model before ordering.
Can readings be corrected on site
Consoles with manual calibration let you offset temperature, humidity and pressure without returning the unit.
Will the radio work through insulated panel
Metal-faced panel cuts 433MHz range hard. Plan for the lower end of the range figure, and talk to us about sensor and console placement before you order.
Is there a data log we can export
Consoles hold min and max records with manual or 24 hour automatic clearing. For anything beyond that, email [email protected] with your requirement.
Specifying for Cold Chain and Storage
Send the site conditions, the distances involved and the readings you need. We will shortlist from the range and say plainly where our hardware is not the right tool.