Latex Door Mat
Latex Backed Indoor Door Mat in Nylon or Polyester
An indoor entrance mat specified from the yarn up rather than picked off a shelf. Surface in 100% nylon, polyester, microfiber or…
View specification →
Rubber Door Mat
Custom Printed Nylon Logo Mat with Nitrile Rubber Backing
Our core entrance logo mat, available in four constructions from FH-400N to FH-950N. Pile weight runs 400g/m2, 650g/m2, 800g/m2 and 950g/m2, with pile height from 3.5mm to 7mm, on a 1.2 to 2mm nitrile rubber back. Logo and mat are solution dyed to prevent fading, colour fastness is graded 4 to 4.5, and the minimum order is one piece.
Product Photographs
Images of this product as supplied, including surface, backing and edge detail.
Specification
| FH-400N | 400g/m2 pile weight, tufted pile, 3.5mm pile height |
|---|---|
| FH-650N | 650g/m2 pile weight, twisted pile, 4mm pile height |
| FH-800N | 800g/m2 pile weight, twisted pile, 5mm pile height |
| FH-950N | 950g/m2 pile weight, twisted pile, 7mm pile height |
Construction and Features
- Pile material 100% nylon polyamide
- Back material normal rubber and nitrile rubber, 1.2 to 2mm back thickness
- Colour fastness 4 to 4.5 grade
Key Benefits
- Four pile weights from 400g/m2 to 950g/m2 to match entrance traffic
- Solution dyed logo and mat, which prevents fading rather than slowing it
- Colour fastness graded 4 to 4.5
- 100% nylon polyamide surface gives high absorption and durability
- MOQ is 1 piece only, with no set-up fees or artwork processing charges
Customisation Options
- Popular sizes 40x60cm, 50x70cm, 60x90cm, 83x120cm and 83x150cm
- Custom sizes available with width within 200cm
- Model chosen by pile weight and pile height
- No set-up fees or artwork processing charges
- MOQ 1 piece only
Who It Is For
- Hotel groups and hospitality operators
- Retail and franchise brands standardising entrance branding
- Mat rental companies building a custom range
- Promotional distributors quoting logo mats
Problems It Solves
- Printed logo mats fading within a season in a sunlit entrance
- Set-up and artwork fees making a single-site order uneconomic
- One pile weight specified across entrances with very different traffic
- Entrance floor space doing nothing for the brand
Application Scenarios
- Business entrances and reception areas
- Hotel and restaurant doorways
- Retail store entrances carrying the shop brand
- Franchise networks where every site needs the same mat
Quality Control
- Pile weight verified against the ordered model specification
- Colour fastness checked to the 4 to 4.5 grade standard
- Back thickness measured against the 1.2 to 2mm specification
- Logo registration checked against the approved artwork
Compared With the Alternatives
| Printed polyester logo mat | Solution dyed nylon is specified to prevent fading, where a surface-printed polyester mat loses colour faster in a sunlit doorway. |
|---|---|
| Plain rubber entrance mat | A nylon pile absorbs water and dirt at the door and carries a full-colour logo, which moulded rubber cannot. |
Use Guide
- Choose the model by traffic: FH-400N for light use up to FH-950N for the busiest entrances
- Lay flat with the nitrile rubber back against a clean dry floor
- Vacuum daily in a commercial entrance
- Lift and dry the floor beneath in wet weather
Related Products
Sublimation Door Mat Blank
Sublimation Door Mat Blank in Polyester and Nitrile Rubber
An undecorated mat blank for print shops and print-on-demand sellers. The 100% polyester non-woven pile is made to take sublimation…
View specification →Keep Reading
Custom Printed Nylon Logo Mat with Nitrile Rubber Backing FAQ
What is the lead time?
7 to 10 days for a sample and 20 to 30 days for mass production.
What is the minimum order quantity?
1 piece only.
Will the logo fade at a sunny entrance?
The logo and mat are solution dyed to prevent fading, and colour fastness is graded 4 to 4.5.
Which model should we specify?
FH-400N has a 400g/m2 tufted pile at 3.5mm, FH-650N 650g/m2 twisted at 4mm, FH-800N 800g/m2 twisted at 5mm and FH-950N 950g/m2 twisted at 7mm. Heavier pile suits heavier traffic.
Are there set-up or artwork charges?
No set-up fees and no artwork processing charges.
What sizes are available?
40x60cm, 50x70cm, 60x90cm, 83x120cm and 83x150cm, with other custom sizes made to order as long as the width is within 200cm.
What is the backing made from?
Normal rubber or nitrile rubber at 1.2 to 2mm back thickness.
Quote This Product
Send the finished size, the quantity and your artwork file. Art fee is free and we send a proof before production starts.