Rubber Door Mat
Custom Printed Nylon Logo Mat with Nitrile Rubber Backing
Our core entrance logo mat, available in four constructions from FH-400N to FH-950N. Pile weight runs 400g/m2, 650g/m2, 800g/m2 and…
View specification →
Latex Door Mat
Latex Backed Indoor Door Mat in Nylon or Polyester
An indoor entrance mat specified from the yarn up rather than picked off a shelf. Surface in 100% nylon, polyester, microfiber or polypropylene, in 3mm to 10mm cut pile or loop pile; backing in latex, TPR, rubber, polyester cotton, action back or a custom build. Shapes include square, rectangle, round and die cut, and the art fee is free.
Specification
Construction and Features
- Surface material 100% nylon or polyester, 3mm to 10mm cut pile or loop pile
- Microfiber and polypropylene surfaces also available
- Backing latex, TPR, rubber, polyester cotton, action back or customised
- Shapes square, rectangle, round or die cut
- Colour unlimited on polyester, within 12 colours on nylon
- Size customised, with width divisible by 400cm roll width
Key Benefits
- Surface and backing specified separately so the mat matches the traffic it will see
- Cut pile or loop pile between 3mm and 10mm
- Unlimited colour on a polyester surface, within 12 colours on nylon
- Square, rectangle, round or die cut outlines
- Free artwork on any customised design
Customisation Options
- Surface, pile style and pile height specified per order
- Backing chosen to suit the floor and the traffic
- Any shape including die cut outlines
- Art fee is free
Who It Is For
- Mat rental and washroom service companies
- Facilities and contract cleaning suppliers
- Retail and hospitality groups with a house entrance standard
- Distributors specifying entrance matting by pile and backing
Problems It Solves
- Off-the-shelf mats that do not match a building's traffic or floor
- Colour limits forcing a brand to change its artwork
- Rectangular-only mats in an entrance with a curved or unusual footprint
- Backing types that do not suit the floor they sit on
Application Scenarios
- Office and building entrance lobbies
- Retail store doorways
- Hotel and hospitality entrances
- Indoor circulation areas that collect dirt from outside
Quality Control
- Pile height verified against the ordered specification
- Backing bond inspected across the full panel
- Colour count checked against the approved design
Compared With the Alternatives
| Rubber backed logo mat | This is an indoor specification where you choose pile and backing separately; the nitrile rubber logo mat is a fixed construction built for heavy entrance duty. |
|---|---|
| Standard stocked entrance mat | Pile height, backing and shape are all specified per order rather than taken from a fixed range. |
Use Guide
- Confirm the entrance footprint and traffic level before choosing pile height and backing
- Lay flat on a clean dry floor
- Vacuum daily in a busy entrance
- Lift periodically to dry the floor underneath in wet weather
Related Products
Sublimation Door Mat Blank
Sublimation Door Mat Blank in Polyester and Nitrile Rubber
An undecorated mat blank for print shops and print-on-demand sellers. The 100% polyester non-woven pile is made to take sublimation…
View specification →Keep Reading
Latex Backed Indoor Door Mat in Nylon or Polyester FAQ
What surface materials can I choose?
100% nylon, polyester, microfiber or polypropylene, in 3mm to 10mm cut pile or loop pile.
What backings are available?
Latex, TPR, rubber, polyester cotton, action back or a customised backing.
How many colours can the design use?
Colour is unlimited on a polyester surface and within 12 colours on a nylon surface.
Can the mat be a non-rectangular shape?
Yes. Square, rectangle, round and die cut shapes are all produced.
Are there constraints on the size?
Size is customised, and the width should be divisible by the 400cm roll width.
Is there an art fee?
No. The design is customised and the art fee is free.
Quote This Product
Send the finished size, the quantity and your artwork file. Art fee is free and we send a proof before production starts.