Single Bowl Customizable Stainless Steel Undermount Sink
Built to the cut-out you already have, not the other way round
What This Product Is And Who It Is For
A handmade single bowl undermount sink in stainless steel, fabricated to the bowl size, depth and corner radius you specify.
It is bought by worktop fabricators, kitchen brands and project contractors who are working to a fixed cut-out rather than a catalogue size.
The drain is set towards the rear so the waste pipe clears the cabinet shelf.
Why Buyers Specify It
Your dimensions, not ours
Bowl length, width, depth and radius are fabrication inputs, so the sink is made for the cabinet instead of the cabinet being rebuilt.
Clean under the worktop edge
Undermounting leaves a continuous stone surface running straight into the bowl, with no rim to trap debris.
Rear drain frees the cupboard
Moving the waste to the back leaves usable shelf space under the sink.
Tight radius, easy to wipe
A small internal radius looks contemporary and still lets a cloth reach the corner.
What It Fixes In A Buying Programme
Catalogue sizes never match the cabinet
The bowl is fabricated to your figure.
Rimmed sinks collect debris at the seal
Undermounting removes the rim entirely.
Central drains block the cupboard
The rear-offset waste keeps the shelf usable.
Who It Is For
- Worktop fabricators who need the sink to match an existing template
- Kitchen brands building a made-to-measure range
- Project contractors ordering one size in volume
Technical Features
- Handmade fabricated bowl, welded and dressed corners
- Rear-offset drain position
- Tight internal corner radius
- Mounting lugs or clips for stone and solid surface
- Brushed interior finish
Where It Ends Up
Stone and quartz worktops
Undermount detailing is the standard for engineered stone.
Bespoke kitchen projects
Where the cut-out is set by the design, not by a stock sink.
Apartment developments
One bowl size repeated across many units.
Laboratory and clinic tea points
Simple, wipe-clean detail with no rim.
Single Bowl Customizable Stainless Steel Un… In Detail
Factory photographs of the single bowl customizable stainless steel un…. Every finish and accessory combination visible on the single bowl customizable stainless steel un… can be ordered as shown.
Specification Table
Every figure we can evidence for this undermount sink is listed below. Where a dimension on the single bowl customizable stainless steel un… is set by your own order, or has not been measured and documented yet, the row reads TBC instead of a plausible-looking number.
| Product type | Undermount kitchen sink |
|---|---|
| Bowl configuration | Single bowl |
| Construction | Handmade, welded and dressed |
| Material | 304 stainless steel (202 / 201 on request) |
| Drain position | Rear offset (centre available) |
| Bowl size | Made to order — TBC — confirm on enquiry |
| Bowl depth | Made to order — TBC — confirm on enquiry |
| Steel thickness | TBC — confirm on enquiry |
| Corner radius | Specified per order — TBC — confirm on enquiry |
Materials
304 stainless steel is the default for undermount kitchen work; 202 and 201 are available where the market is price-led.
Mounting hardware is supplied to suit stone, solid surface or timber worktops — say which at order stage.
Customisation Options
- Bowl length, width and depth
- Internal corner radius
- Drain position — centre, rear centre or rear corner
- Overflow, tap ledge or a completely plain bowl
How It Is Made
Take the drawing
Bowl size, depth, radius and drain position are fixed from your drawing before any steel is cut.
Cut and fold
The blank is cut to the developed size and the walls are folded up.
Weld and dress
Corners are welded, ground and polished until the radius is continuous and no seam shows.
Fit lugs and brush
Mounting lugs are attached and the bowl is brushed in one direction.
Quality Control
- Finished bowl dimensions are measured against the order drawing before packing.
- Every bowl is water-tested at the drain seat.
- Corners are inspected for weld pinholes under light after polishing.
Certifications
No certification mark is claimed for the single bowl customizable stainless steel un… anywhere on this site, because we state only what a document can back up. If your market needs WaterMark, cUPC, CE or a material certificate against this undermount sink, raise it before the order and we will reply in writing on what is available for the single bowl customizable stainless steel un….
Compared With A Pressed Topmount Sink
The volume alternative is a pressed sink dropped into the worktop from above.
| Aspect | Single Bowl Customizable Stainless Steel Un… | A Pressed Topmount Sink |
|---|---|---|
| Sizes available | Made to your drawing | Fixed catalogue sizes |
| Worktop detail | Continuous, no rim | Rim sits on the surface |
| Corner radius | Specified | Set by the press tool |
Use Guide
Step 1
Send the worktop cut-out template with the enquiry, not after the order.
Step 2
Support the bowl on rails or a cradle, not on the sealant alone.
Step 3
Seal with a neutral-cure silicone between bowl flange and worktop.
Step 4
Wipe dry after use; standing water is what leaves marks on brushed steel.
Single Bowl Customizable Stainless Steel Un… — Frequently Asked Questions
What is the minimum corner radius you can hold?
It depends on bowl depth and steel thickness. Send the drawing and we will confirm what is achievable rather than quote a number that may not apply to your bowl.
Can you match an existing sink we already sell?
Usually yes. Send a sample or a dimensioned drawing of the sink you are replacing.
Do you supply the mounting hardware?
Yes — say whether the worktop is stone, solid surface or timber so the right clips go in the box.
Products And Reading That Go With This One
Two bowls, your split, one fabricated body
View product
The bowl for the 400 mm cabinet nobody makes a sink for
View product
One deep bowl, a curved apron and a grid that keeps pans off the base
View productThe three mounting types are not three styles of the same product. They demand different worktops,…
Read the guideMost custom sink quotations stall for the same reason: the enquiry gives a length and a width and…
Read the guideOne specification, several hundred kitchens, no surprises
See the applicationStock that moves, with the waste kit already in the box
See the applicationQuote Single Bowl Customizable Stainless Steel Un…
Send the quantity, the steel grade, the finish and any dimensions you need changed. If you are replacing an existing supplier, a sample is faster than a drawing.