Single Bowl 304 Stainless Steel Kitchen Sink
One deep bowl, a drilled ledge, and a finish choice that changes the price point
What This Product Is And Who It Is For
A single bowl topmount kitchen sink in 304 stainless steel with a rear tap ledge drilled to order.
It is the single-bowl counterpart to our double topmount and covers the same volume ranges and refurbishment programmes.
It is produced brushed and in a black nano finish, and can carry a ledge accessory set.
Why Buyers Specify It
One bowl, maximum capacity
For the same cut-out, a single bowl holds trays and oven shelves a double bowl cannot.
Black finish for dark kitchens
A black nano version matches matt cabinetry without changing the sink body.
Ledge drilled to your tap
Hole count and spacing are set per order, so the same body serves single-lever and three-hole markets.
Straightforward to fit
Drop in, seal, connect — the cheapest sink to install on a refurbishment programme.
What It Fixes In A Buying Programme
Double bowls waste space where there is a dishwasher
A single bowl gives back the capacity.
Black sinks are usually composite
This one is steel, so it shares fitting details with the rest of the range.
Tap standards differ by market
Hole drilling is an order line, not a new product.
Who It Is For
- Distributors covering volume single-bowl demand
- Kitchen brands needing a black sink without a separate range
- Refurbishment contractors buying repeat quantities
Technical Features
- Single deep bowl
- Rear tap ledge, drilled to order
- Brushed stainless or black nano finish
- Optional ledge accessories — rack, colander, board
- Underside sound-deadening (specify at order)
Where It Ends Up
Apartment and rental kitchens
One bowl, one cut-out, fast to fit and to replace.
Dark and matt kitchen schemes
The black nano version reads as part of the design.
Kitchens with a dishwasher
A second bowl is redundant where crockery goes in the machine.
Small commercial tea points
Deep single bowl for jugs and urn parts.
Single Bowl 304 Stainless Steel Kitchen Sink In Detail
Factory photographs of the single bowl 304 stainless steel kitchen sink. Every finish and accessory combination visible on the single bowl 304 stainless steel kitchen sink can be ordered as shown.
Specification Table
Every figure we can evidence for this topmount sink is listed below. Where a dimension on the single bowl 304 stainless steel kitchen sink is set by your own order, or has not been measured and documented yet, the row reads TBC instead of a plausible-looking number.
| Product type | Topmount kitchen sink |
|---|---|
| Bowl configuration | Single bowl with tap ledge |
| Material | 304 stainless steel (202 / 201 on request) |
| Finish | Brushed stainless or black nano |
| Tap holes | Drilled to order |
| Overall size | TBC — confirm on enquiry |
| Bowl depth | TBC — confirm on enquiry |
| Steel thickness | TBC — confirm on enquiry |
Materials
304 stainless steel body. The black version is a nano coating applied over the finished steel.
Sound-deadening pads and anti-condensation coating are available on the underside.
Customisation Options
- Bowl size and depth
- Tap hole count and spacing, or undrilled
- Finish — brushed or black nano
- Accessory pack and underside treatment
How It Is Made
Blank and form
Bowl and ledge are set out on a single sheet.
Weld and dress
Corners are welded and ground so the internal radius is continuous.
Drill
Tap holes are punched to the order sheet.
Finish
Brushed, then nano coated for the black SKU.
Quality Control
- Hole spacing checked against the order sheet before finishing.
- Water test at the drain seat.
- Black coated units checked for even colour across the ledge and bowl.
Certifications
No certification mark is claimed for the single bowl 304 stainless steel kitchen sink anywhere on this site, because we state only what a document can back up. If your market needs WaterMark, cUPC, CE or a material certificate against this topmount sink, raise it before the order and we will reply in writing on what is available for the single bowl 304 stainless steel kitchen sink.
Compared With A Composite Granite Single Bowl
In the same price bracket buyers often compare steel against composite granite.
| Aspect | Single Bowl 304 Stainless Steel Kitchen Sink | A Composite Granite Single Bowl |
|---|---|---|
| Impact | Dents | Chips |
| Heat | Unaffected by a hot pan | Can mark |
| Colour range | Brushed or black nano | Wide colour range |
Use Guide
Step 1
Confirm tap hole spacing before production.
Step 2
Bed the rim on neutral-cure silicone.
Step 3
Use a bottom grid if the bowl will take pans daily.
Step 4
On the black finish avoid abrasive pads and bleach.
Single Bowl 304 Stainless Steel Kitchen Sink — Frequently Asked Questions
Is the black finish scratch resistant?
The nano coating is hard but it is a surface. Keep steel wool and scouring cream off it. Abrasion test data is TBC — ask if your market requires published figures.
Can we have the same bowl undrilled?
Yes. Undrilled is normal where the tap is wall-mounted or worktop-mounted.
Do you supply matching wastes?
Yes — see our sink accessories, which are produced in the same factory.
Products And Reading That Go With This One
The volume double bowl, with the ledge and accessories buyers actually ask for
View product
The waste kit that ships in the same box as the sink
View product
The drainer is part of the sink, not a tray sitting on the worktop
View productAll three grades are austenitic stainless and all three make a usable sink. What differs is how…
Read the guideStainless steel does not rust, but things left on it do. Almost every complaint about a stainless…
Read the guideStock that moves, with the waste kit already in the box
See the applicationOne specification, several hundred kitchens, no surprises
See the applicationQuote Single Bowl 304 Stainless Steel Kitchen Sink
Send the quantity, the steel grade, the finish and any dimensions you need changed. If you are replacing an existing supplier, a sample is faster than a drawing.