D3X High Speed PCB Drilling Machine
XYZ axis linear motor drive with high precision linear scale and guide. The fastest configuration in the DLCNC drilling range.
XYZ axis linear motor drive with high precision linear scale and guide. The fastest configuration in the DLCNC drilling range.
Send a drawing or a drill file by WhatsApp or email. There is no form on this site.
Product Overview
The D3X applies to printed circuit board drilling and is economical accurate and quick. The granite base frame gives good rigidity and good vibration absorption so the bed is not inclined to distortion.
Linear motors on all three axes remove the ball screw from the drive train. Feed rate rises to 80m/min on XY and 50m/min on Z and position is read directly by a high precision linear scale rather than inferred from screw rotation.
Configuration
- XYZ axis linear motor
- High precision linear scale and guide
- Granite marble base frame
Technical Features
- XYZ independent structure with linear motor to improve the drilling speed
- Quick drill function reduces the waiting time
- QIC function improves the drilling accuracy and speed
- Smart gripper design picks and loads efficiently and precisely
- 220pcs tooling capacity for the spindle to handle
- Automatic tooling length and diameter check
- Contacted tooling broken detection greatly reduces reaction time
- Water cooling system with real time monitoring on cooling temperature and water flow to protect the spindles
Key Benefits
Highest feed rate in the range
80m/min on XY and 50m/min on Z which is the fastest Z axis of the four drilling series.
Direct position feedback
A high precision linear scale reads the axis position directly. Linear scale needs a clean environment so contamination control matters on this build.
No ball screw recalibration
Linear motor drive removes the annual ball screw recalibration that a screw driven table needs.
Same tooling automation as D2X and D4X
220pcs capacity automatic tool length and diameter check and contacted broken tool detection.
Specifications
Copied from the DLCNC machine documentation without change.
| Processing Area of Each Axis | 680mm×680mm |
|---|---|
| Spindle Speed | 160-200krpm |
| Drilling Diameter | φ0.15-φ6.35mm |
| XY axis max movement speed | 80/min |
| Z axis max movement speed | 50/min |
| Positioning Accuracy | ±0.01mm |
| Repeatability Accuracy | ±0.005mm |
| Drilling Accuracy | ±1mil |
| Power Supply Requirement | 3PH-AC380V+PE 50/60Hz 4KVA |
| Compressed Air Requirement | 35L/min per axis air pressure 2Kg/cm |
| Cooling Water Temperature | 18℃-25℃ |
| Working Condition Temperature | 20℃-25℃ |
| Humidity | 50%-75% |
Who It Is For
- PCB fabricators drilling multilayer rigid boards in volume
- Quick turn and prototype shops that change tool sets many times per shift
- In house PCB departments inside electronics manufacturers
- Machine dealers and service partners covering the PCB equipment market
- Hole location accuracy drifting outside the CPK window the customer has to report
- Long waiting time between drill cycles caused by slow tool change and tool checking
- Broken drill bits discovered only after a whole panel stack is scrapped
- Spindle damage caused by cooling water that is not monitored in real time
Comparison With Other Models
Same category different configuration. Where a figure is not published in the documentation the cell shows a dash.
Use and Maintenance Guide
Before The Shift
Check appearance spindle and tool cassette tooling computer electric cabin lubricant oil cooling liquid air pipe tooling box and shelf. Run the spindle at low speed for at least ten minutes.
Every Week
Cut the power first. Clean inside and outside lubricate the worktable clean and lubricate the collet and sort the computer cables. About one hour on the night shift.
Every Month
Add guide rail cover removal cleaning and lubrication the limit switch check and the electric cabin fan filter. About one and a half hours with repair staff present.
When Accuracy Drifts
Work the four factors in order. Equipment condition then technics parameters then tool status then operator method.
Quality Control and Certification
- ISO-9001 quality certificate obtained in 2012
- National High Tech Enterprise approved by Sichuan provincial authorities
- Patented auto pin insert function for PCB routing machines granted November 2019
- Joint Intellectual Equipment Technology Research and Develop Center with Xihua University
Related Products
D4X PCB Drilling Machine
Linear motor drive with high precision linear scale and guide on a granite marble base frame. The D4X is the volume drilling configurat...
D2X PCB Drilling Machine
Independent Z axis structure on XYZ ball screw drive. The independent Z axis holds the vertical accuracy of the machine and improves th...
D1X PCB Drilling Machine
One Z axis carrying one or multiple spindles with a maximum of four spindles on XYZ ball screw drive. The entry point into the DLCNC dr...
Related Applications Solutions and Guides
Multilayer Rigid PCB Drilling
Drilling takes up the longest time of the whole PCB process and around 90 percent of it is performed by mechan...
PCB Depaneling and Profiling
Routing is where the panel becomes the product. DLCNC machines are applied in the precision drilling and milli...
Drilling Line Solution
Choosing a drilling machine is a decision about drive technology tool management and environment. This is how ...
Spare Parts and Maintenance
Equipment is the first of the four factors that affect hole location accuracy. Regular check and maintenance l...
Ball Screw and Linear Motor Drives Compared
The drive train is the single biggest difference between the four DLCNC drilling series. This is what changes ...
PCB Drilling Hole Location Accuracy and CPK
Good hole location accuracy makes the following processes easier and to some extent even makes up for weakness...
D3X PCB Drilling Machine FAQ
Why choose linear motors over ball screws
Linear motor drive gives a quicker feed rate. On the DLCNC range that is 80m/min on XY against 50m/min for the ball screw driven D2X.
Does the linear scale need special care
Linear scale has higher precision but it is sensitive to dust so contamination has to be kept away from it. This is covered in the machine maintenance schedule.
Is drilling accuracy better than D2X
Drilling accuracy is ±1mil on D2X D3X and D4X. What changes on the D3X is the speed at which that accuracy is delivered.
What is the difference between D3X and D4X
D3X uses a linear motor on the Z axis and reaches 50m/min there. On D4X the Z axis runs at 30m/min.
Ready To Talk About the D3X PCB Drilling Machine
Send the board format the hole or slot geometry and the output you need. You will get an engineer reply not a sales template.
CAD and drawing files are accepted on request through WhatsApp or email. No form to fill in.
