PCB CNC Drilling Machine
DLCNC has developed four PCB CNC drilling series. They are D1X D2X D3X and D4X. Every series runs on a granite marble base frame for rigidity and vibration absorption so the bed is not inclined to distortion. The series differ in the number of independent Z axes and in the drive technology used on the X Y and Z axes which is what sets the achievable feed speed and hole location accuracy.
DLCNC has developed four PCB CNC drilling series. They are D1X D2X D3X and D4X. Every series runs on a granite marble base frame for rigidity and vibration absorption so the bed is not inclined to distortion. The series differ in the number of independent Z axes and in the drive technology used on the X Y and Z axes which is what sets the achievable feed speed and hole location accuracy.
Model Overview
Machines in This Category
D1X PCB Drilling Machine
One Z axis carrying one or multiple spindles with a maximum of four spindles on XYZ ball screw drive. The entry point into the DLCNC dr...
D2X PCB Drilling Machine
Independent Z axis structure on XYZ ball screw drive. The independent Z axis holds the vertical accuracy of the machine and improves th...
D3X PCB Drilling Machine
XYZ axis linear motor drive with high precision linear scale and guide. The fastest configuration in the DLCNC drilling range.
D4X PCB Drilling Machine
Linear motor drive with high precision linear scale and guide on a granite marble base frame. The D4X is the volume drilling configurat...
Who This Category Is For
- PCB fabricators drilling multilayer rigid boards in volume
- Quick turn and prototype shops that change tool sets many times per shift
- In house PCB departments inside electronics manufacturers
- Machine dealers and service partners covering the PCB equipment market
- Hole location accuracy drifting outside the CPK window the customer has to report
- Long waiting time between drill cycles caused by slow tool change and tool checking
- Broken drill bits discovered only after a whole panel stack is scrapped
- Spindle damage caused by cooling water that is not monitored in real time
Related Applications and Solutions
Multilayer Rigid PCB Drilling
Drilling takes up the longest time of the whole PCB process and around 90 percent of it is performed by mechanical CNC d...
PCB Depaneling and Profiling
Routing is where the panel becomes the product. DLCNC machines are applied in the precision drilling and milling of irre...
Drilling Line Solution
Choosing a drilling machine is a decision about drive technology tool management and environment. This is how DLCNC work...
PCB CNC Drilling Machine Questions
Which drilling series suits a shop that drills small hole diameters
D2X D3X and D4X all drill from φ0.15mm to φ6.35mm at 160-200krpm. D1X starts at φ0.3mm at 160krpm. If your product mix includes holes below φ0.3mm choose D2X or above.
What is the difference between D3X and D4X
Both use independent Z axis structure and both reach 80m/min on the XY axes. D3X carries a Z axis linear motor and reaches 50m/min on Z. D4X runs 30m/min on Z. Drilling accuracy is ±1mil on both.
Do all drilling machines use air bearing spindles
D1X and D2X are configured with air bearing spindles. Air bearing spindles reach the high speed that improves drilling precision which is why they are preferred for drilling rather than routing.
How many tools can the machine handle without operator intervention
D1X handles 66pcs per spindle. D2X D3X and D4X handle 220pcs per spindle with automatic tool length and diameter check.
Get the Specification That Matches Your Board
Send the panel format the hole or slot geometry and the output you need. An engineer replies with the model and the published specification behind it.
CAD and drawing files are accepted on request through WhatsApp or email. No form to fill in.
