D2X PCB Drilling Machine
Independent Z axis structure on XYZ ball screw drive. The independent Z axis holds the vertical accuracy of the machine and improves the drilling speed.
Independent Z axis structure on XYZ ball screw drive. The independent Z axis holds the vertical accuracy of the machine and improves the drilling speed.
Send a drawing or a drill file by WhatsApp or email. There is no form on this site.
Product Overview
The D2X applies to printed circuit board drilling and is economical accurate and quick. The granite base frame gives good rigidity and good vibration absorption so the bed is not inclined to distortion.
Moving from the D1X to the D2X changes the structure. Each spindle gets its own Z axis which is what allows the machine to hold vertical accuracy while running faster and to carry the larger 220pcs tool cassette with automatic diameter checking.
Configuration
- XYZ axis imported AC servo drive system
- Imported high precision ball screw and linear guides
- Air bearing spindles
- Granite marble base frame
Technical Features
- XYZ independent structure
- Independent Z axis holds the vertical accuracy of the machine and improves the drilling speed
- Quick drill function reduces the waiting time
- QIC function improves the drilling accuracy and speed
- Smart gripper design picks and loads efficiently and precisely
- 220pcs tooling capacity for the spindle to handle
- Automatic tooling length and diameter check
- Contacted tooling broken detection greatly reduces reaction time
- Water cooling system with real time monitoring on cooling temperature and water flow to protect the spindles
Key Benefits
Vertical accuracy under speed
The independent Z axis is what lets the machine raise drilling speed without giving up vertical accuracy.
Less waiting between cycles
Quick drill function reduces the waiting time and QIC function improves both the drilling accuracy and the speed.
Long unattended runs
220pcs tool capacity with automatic length and diameter check keeps the machine drilling through a mixed hole size programme.
Spindle protection
Cooling temperature and water flow are monitored in real time which is the practical way to protect an air bearing spindle.
Specifications
Copied from the DLCNC machine documentation without change.
| Processing Area of Each Axis | 680mm×680mm |
|---|---|
| Spindle Speed | 160-200krpm |
| Drilling Diameter | φ0.15-φ6.35mm |
| XY axis max movement speed | 50/min |
| Z axis max movement speed | 30/min |
| Positioning Accuracy | ±0.01mm |
| Repeatability Accuracy | ±0.005mm |
| Drilling Accuracy | ±1mil |
| Power Supply Requirement | 3PH-AC380V+PE 50/60Hz 4KVA |
| Compressed Air Requirement | 35L/min per axis air pressure 2Kg/cm |
| Cooling Water Temperature | 18℃-25℃ |
| Working Condition Temperature | 20℃-25℃ |
| Humidity | 50%-75% |
Who It Is For
- PCB fabricators drilling multilayer rigid boards in volume
- Quick turn and prototype shops that change tool sets many times per shift
- In house PCB departments inside electronics manufacturers
- Machine dealers and service partners covering the PCB equipment market
- Hole location accuracy drifting outside the CPK window the customer has to report
- Long waiting time between drill cycles caused by slow tool change and tool checking
- Broken drill bits discovered only after a whole panel stack is scrapped
- Spindle damage caused by cooling water that is not monitored in real time
Comparison With Other Models
Same category different configuration. Where a figure is not published in the documentation the cell shows a dash.
Use and Maintenance Guide
Before The Shift
Check appearance spindle and tool cassette tooling computer electric cabin lubricant oil cooling liquid air pipe tooling box and shelf. Run the spindle at low speed for at least ten minutes.
Every Week
Cut the power first. Clean inside and outside lubricate the worktable clean and lubricate the collet and sort the computer cables. About one hour on the night shift.
Every Month
Add guide rail cover removal cleaning and lubrication the limit switch check and the electric cabin fan filter. About one and a half hours with repair staff present.
When Accuracy Drifts
Work the four factors in order. Equipment condition then technics parameters then tool status then operator method.
Quality Control and Certification
- ISO-9001 quality certificate obtained in 2012
- National High Tech Enterprise approved by Sichuan provincial authorities
- Patented auto pin insert function for PCB routing machines granted November 2019
- Joint Intellectual Equipment Technology Research and Develop Center with Xihua University
Related Products
D3X PCB Drilling Machine
XYZ axis linear motor drive with high precision linear scale and guide. The fastest configuration in the DLCNC drilling range.
D4X PCB Drilling Machine
Linear motor drive with high precision linear scale and guide on a granite marble base frame. The D4X is the volume drilling configurat...
D1X PCB Drilling Machine
One Z axis carrying one or multiple spindles with a maximum of four spindles on XYZ ball screw drive. The entry point into the DLCNC dr...
Related Applications Solutions and Guides
Multilayer Rigid PCB Drilling
Drilling takes up the longest time of the whole PCB process and around 90 percent of it is performed by mechan...
Prototype and Small Batch PCB
A prototype shop changes job more often than it changes shift. The machine that suits it is not the fastest on...
Drilling Line Solution
Choosing a drilling machine is a decision about drive technology tool management and environment. This is how ...
Spare Parts and Maintenance
Equipment is the first of the four factors that affect hole location accuracy. Regular check and maintenance l...
PCB Drilling Hole Location Accuracy and CPK
Good hole location accuracy makes the following processes easier and to some extent even makes up for weakness...
PCB Drilling Machine Maintenance Guideline
This maintenance guideline covers the PCB board drilling machine as a CNC process centre. It also applies to t...
D2X PCB Drilling Machine FAQ
What does the QIC function do
QIC improves the drilling accuracy and the speed. Together with the quick drill function it is what reduces the non cutting time in a drilling cycle.
How small a hole can the D2X drill
φ0.15mm at a spindle speed of 160-200krpm. Drilling accuracy is ±1mil.
How fast are the axes
XY axis maximum movement speed is 50m/min and Z axis maximum movement speed is 30m/min. The D3X and D4X reach 80m/min on XY with linear motors.
What happens if a drill bit breaks
Contacted tooling broken detection reports the break and greatly reduces the reaction time before more panels are drilled.
Ready To Talk About the D2X PCB Drilling Machine
Send the board format the hole or slot geometry and the output you need. You will get an engineer reply not a sales template.
CAD and drawing files are accepted on request through WhatsApp or email. No form to fill in.
