D1X PCB Drilling Machine
One Z axis carrying one or multiple spindles with a maximum of four spindles on XYZ ball screw drive. The entry point into the DLCNC drilling range.
One Z axis carrying one or multiple spindles with a maximum of four spindles on XYZ ball screw drive. The entry point into the DLCNC drilling range.
Send a drawing or a drill file by WhatsApp or email. There is no form on this site.
Product Overview
The D1X applies to printed circuit board drilling and is economical accurate and quick. The granite base frame gives good rigidity and good vibration absorption so the bed is not inclined to distortion.
China has become the largest manufacturing country in the PCB industry and has completed the entire industrial chain layout from low end to high end. In response to the ongoing adoption of higher density smaller hole size multi layer structure and more diverse designs and materials in PCBs DLCNC continues to act as a solution partner for the PCB manufacturing industry.
Configuration
- XYZ axis imported AC servo drive system
- Imported high precision ball screw and linear guides
- Air bearing spindles
- Granite marble base frame
Technical Features
- Smart gripper design picks and loads efficiently and precisely
- 66pcs tooling capacity for the spindle to handle
- Automatic tooling length check
- Contacted tooling broken detection greatly reduces reaction time
- Water cooling system with real time monitoring on cooling temperature and water flow to protect the spindles
Key Benefits
Lowest entry cost in the range
One Z axis serving up to four spindles keeps the machine price down for shops taking drilling in house.
Air bearing spindles as standard
Air bearing spindles reach the speed that improves drilling precision which is why they are used on drilling rather than routing machines.
Catch a broken bit early
Contacted tooling broken detection greatly reduces the reaction time so fewer panels are affected.
Granite base
Good rigidity and vibration absorption and a bed that is not inclined to distortion.
Specifications
Copied from the DLCNC machine documentation without change.
| Processing Area of Each Axis | 580mm×680mm |
|---|---|
| Spindle Speed | 160krpm |
| Drilling Diameter | φ0.3-φ6.35mm |
| XY axis max movement speed | 28-35m/min |
| Positioning Accuracy | ±0.01mm |
| Repeatability Accuracy | ±0.005mm |
| Power Supply Requirement | 3PH-AC380V+PE 50/60Hz |
| Compressed Air Requirement | 35L/min per axis air pressure 2Kg/cm |
| Cooling Water Temperature | 18℃-25℃ |
| Working Condition Temperature | 20℃-25℃ |
| Humidity | 50%-75% |
Who It Is For
- PCB fabricators drilling multilayer rigid boards in volume
- Quick turn and prototype shops that change tool sets many times per shift
- In house PCB departments inside electronics manufacturers
- Machine dealers and service partners covering the PCB equipment market
- Hole location accuracy drifting outside the CPK window the customer has to report
- Long waiting time between drill cycles caused by slow tool change and tool checking
- Broken drill bits discovered only after a whole panel stack is scrapped
- Spindle damage caused by cooling water that is not monitored in real time
Comparison With Other Models
Same category different configuration. Where a figure is not published in the documentation the cell shows a dash.
Use and Maintenance Guide
Before The Shift
Check appearance spindle and tool cassette tooling computer electric cabin lubricant oil cooling liquid air pipe tooling box and shelf. Run the spindle at low speed for at least ten minutes.
Every Week
Cut the power first. Clean inside and outside lubricate the worktable clean and lubricate the collet and sort the computer cables. About one hour on the night shift.
Every Month
Add guide rail cover removal cleaning and lubrication the limit switch check and the electric cabin fan filter. About one and a half hours with repair staff present.
When Accuracy Drifts
Work the four factors in order. Equipment condition then technics parameters then tool status then operator method.
Quality Control and Certification
- ISO-9001 quality certificate obtained in 2012
- National High Tech Enterprise approved by Sichuan provincial authorities
- Patented auto pin insert function for PCB routing machines granted November 2019
- Joint Intellectual Equipment Technology Research and Develop Center with Xihua University
Related Products
D2X PCB Drilling Machine
Independent Z axis structure on XYZ ball screw drive. The independent Z axis holds the vertical accuracy of the machine and improves th...
D3X PCB Drilling Machine
XYZ axis linear motor drive with high precision linear scale and guide. The fastest configuration in the DLCNC drilling range.
CNC PCB Drilling Routing Machine
The PCB CNC drilling and routing machine focuses on offering a high precision drilling and routing choice on one platform. This model i...
Related Applications Solutions and Guides
Prototype and Small Batch PCB
A prototype shop changes job more often than it changes shift. The machine that suits it is not the fastest on...
Multilayer Rigid PCB Drilling
Drilling takes up the longest time of the whole PCB process and around 90 percent of it is performed by mechan...
Drilling Line Solution
Choosing a drilling machine is a decision about drive technology tool management and environment. This is how ...
Spare Parts and Maintenance
Equipment is the first of the four factors that affect hole location accuracy. Regular check and maintenance l...
PCB Drilling Hole Location Accuracy and CPK
Good hole location accuracy makes the following processes easier and to some extent even makes up for weakness...
Ball Screw and Linear Motor Drives Compared
The drive train is the single biggest difference between the four DLCNC drilling series. This is what changes ...
D1X PCB Drilling Machine FAQ
How many spindles can the D1X carry
One Z axis with one or multiple spindles and a maximum of four spindles. The D12 D14 and D16 names follow the build.
What is the smallest hole the D1X drills
φ0.3mm. If you need to go down to φ0.15mm choose D2X D3X or D4X which run at 160-200krpm.
Why is the tool capacity 66pcs and not 220pcs
66pcs is the D1X tool cassette size. The D2X D3X and D4X series carry 220pcs together with automatic tool diameter check as well as length check.
Does the D1X check tool diameter
The D1X checks tool length automatically. Automatic diameter check is a D2X D3X and D4X feature.
Ready To Talk About the D1X PCB Drilling Machine
Send the board format the hole or slot geometry and the output you need. You will get an engineer reply not a sales template.
CAD and drawing files are accepted on request through WhatsApp or email. No form to fill in.
