CNC PCB Drilling and Routing Machine DR Series
The PCB CNC drilling and routing machine focuses on offering a high precision drilling and routing choice on one platform. This model is equipped with a CCD camera or depth control function.
The PCB CNC drilling and routing machine focuses on offering a high precision drilling and routing choice on one platform. This model is equipped with a CCD camera or depth control function.
Send a drawing or a drill file by WhatsApp or email. There is no form on this site.
Product Overview
Where a plant does not have the volume to justify separate drilling and routing machines but still needs both operations held to a tight tolerance the DR series puts them on one high precision platform.
The model is supplied with a CCD camera or with the depth control function depending on which problem you are solving. CCD suits work that must be aligned to features already on the board. Depth control suits partial depth routing.
Technical Features
- Customized build
- High precision drilling and routing on one platform
- CCD camera option
- Depth control option
Key Benefits
Two operations one setup
Drilling and routing on the same machine removes a transfer and a re registration between the two operations.
Align to the board not the fixture
The CCD camera option references features already on the board which matters on boards that have moved during previous processing.
Control the cut depth
Depth control holds partial depth routing where a through cut would damage the product.
Sized to your panel
The work table can be made wider and longer as a customized model example.
Customization Options
- Work table can be wider and longer
- Depth control
Who It Is For
- PCB fabricators depanelling rigid boards after solder mask and surface finish
- Assembly houses separating assembled panels into single boards
- Shops producing slots cut outs and irregular board frames
- Buyers who need a wider or longer work table than a standard model provides
- Manual pin insertion pushing up labour cost and introducing position error
- Output rate limited because a single spindle routes one board at a time
- Standard table size too small for the panel format actually used in the plant
- Cut depth on partial depth routing that cannot be held without depth control
Use and Maintenance Guide
Before The Shift
Check appearance spindle and tool cassette tooling computer electric cabin lubricant oil cooling liquid air pipe tooling box and shelf. Run the spindle at low speed for at least ten minutes.
Every Week
Cut the power first. Clean inside and outside lubricate the worktable clean and lubricate the collet and sort the computer cables. About one hour on the night shift.
Every Month
Add guide rail cover removal cleaning and lubrication the limit switch check and the electric cabin fan filter. About one and a half hours with repair staff present.
When Accuracy Drifts
Work the four factors in order. Equipment condition then technics parameters then tool status then operator method.
Quality Control and Certification
- ISO-9001 quality certificate obtained in 2012
- National High Tech Enterprise approved by Sichuan provincial authorities
- Patented auto pin insert function for PCB routing machines granted November 2019
- Joint Intellectual Equipment Technology Research and Develop Center with Xihua University
Related Products
4 Heads PCB CNC Routing Machine
Four head routing machine independently developed by DLCNC for steady production routing of circuit boards.
D1X PCB Drilling Machine
One Z axis carrying one or multiple spindles with a maximum of four spindles on XYZ ball screw drive. The entry point into the DLCNC dr...
Planer Type PCB Router Machine
Planer type customized machine built on a full granite mechanical frame with a DLCNC self owned control system.
Related Applications Solutions and Guides
Prototype and Small Batch PCB
A prototype shop changes job more often than it changes shift. The machine that suits it is not the fastest on...
PCB Depaneling and Profiling
Routing is where the panel becomes the product. DLCNC machines are applied in the precision drilling and milli...
Machine Customization
DLCNC is a demand oriented corporation. The vision is to turn a customer need into a real machine and a large ...
Drilling Line Solution
Choosing a drilling machine is a decision about drive technology tool management and environment. This is how ...
PCB Drilling Hole Location Accuracy and CPK
Good hole location accuracy makes the following processes easier and to some extent even makes up for weakness...
How To Choose a CNC Drilling and Routing Machine
CNC machines are vital in PCB processing. These are the points DLCNC engineers work through with a buyer befor...
CNC PCB Drilling Routing Machine FAQ
What is the difference between DR11 DR12 and DR14
They are the build variants of the drilling and routing platform. The variant is set by the spindle count and the table format you need.
Do I get the CCD camera and depth control together
The model is equipped with a CCD camera or with the depth control function. Tell us which operation you are trying to hold and we confirm the build.
Can the machine replace a dedicated drilling machine
For high precision drilling combined with routing on one platform yes. For volume drilling at 160-200krpm with 220 tool capacity a D series drilling machine is the correct choice.
Is a larger table available
Yes. A wider and longer work table is a listed customized model example.
Ready To Talk About the CNC PCB Drilling Routing Machine
Send the board format the hole or slot geometry and the output you need. You will get an engineer reply not a sales template.
CAD and drawing files are accepted on request through WhatsApp or email. No form to fill in.
