Custom Drum Mat with Non-Slip Latex Backing
A drum rug in crystal velvet on a high-density non-slip latex bottom, hemmed by hand. The thickness and the hem are there to do two jobs at once: keep the kit from creeping forward during a set, and take some of the shock and sound out of the floor underneath. Printed with laser dyeing, so any design goes on with no colour limitation and small quantities are accepted.
Product Photographs
Images of this product as supplied, including surface, backing and edge detail.
Specification
Construction and Features
- Pile material polyester or nylon
- Backing options in non-woven cloth, latex, TPR or rubber
- Crystal velvet face fabric
- High-density non-slip latex bottom, moisture-proof and non-deforming
- Handmade hemming on the edge
- Popular size 4x6ft or customised
Key Benefits
- High-density non-slip latex bottom stops the kit walking forward while you play
- Thickened build with handmade hemming gives sound insulation and shock absorption
- Crystal velvet surface is wear and dirt resistant, does not ball and does not shed
- Laser printing and dyeing gives no odour, no fading and a washable surface
- No formaldehyde in the printed surface
Customisation Options
- Any printed design with no colour limitation
- Popular size 4x6ft or a custom finished size
- Choice of latex, TPR, rubber or non-woven backing
- Small quantity is acceptable
Who It Is For
- Drum and percussion brands adding a branded rug
- Music retailers stocking drum accessories
- Venues and schools fitting out rehearsal rooms
- Bands ordering a small run with their own artwork
Problems It Solves
- Kits creeping forward across a smooth stage during a set
- Floor damage from spurs and stands
- Room reflections and impact noise travelling through a floor
- Rugs that shed or ball up under constant hardware pressure
Application Scenarios
- Rehearsal rooms and home practice spaces
- Stage and live performance kit placement
- Studio floors where reflections need controlling
- Music schools and teaching rooms
Quality Control
- Hem inspected around the full perimeter
- Backing density checked against the specification
- Print checked for fading and odour after dyeing
Compared With the Alternatives
| Generic area rug used as a drum rug | This is built with a high-density latex bottom and a hand hem specifically to resist creep and hardware wear. |
|---|---|
| Rubber stage mat | A velvet pile absorbs impact sound where a rubber sheet reflects it back into the room. |
Use Guide
- Lay the rug flat and position the kit before tightening spurs
- Mark spur and pedal positions so the kit resets to the same place
- Wash according to the care instructions supplied with the rug
- Roll rather than fold so hardware does not press a crease into the pile
Keep Reading
Custom Drum Mat with Non-Slip Latex Backing FAQ
What size should a drum rug be?
4x6ft is the popular size and covers a standard kit. Custom sizes are made to order for larger setups.
Will it stop the kit sliding forward?
The back is a high-density non-slip latex bottom specified as non-slip, moisture-proof and non-deforming.
Can we print our band or brand artwork on it?
Yes. There is no colour limitation and your design is printed onto the mat clearly.
Is there a minimum order quantity?
Small quantity is acceptable.
Is the mat washable?
Yes. The laser printing and dyeing process produces a washable surface with no fading and no odour.
Does it help with sound?
The thickened construction with handmade hemming provides sound insulation and shock absorption.
Quote This Product
Send the finished size, the quantity and your artwork file. Art fee is free and we send a proof before production starts.