Garage Mat
Oil and Gas Resistant Garage Motorcycle Mat with Printed Logo
A carpeted garage mat built for bikes that leak, drip and get worked on. The nylon top takes a full-colour printed design, the nitrile…
View specification →
Custom Mat Manufacturer In Shenzhen
Your Logo On The Floor From One Piece
Entrance mats, motorcycle pit mats and chair mats printed to your artwork. No art fee, no set-up fee, and a proof before anything is produced.
Entrance Logo Mats
Solution Dyed Logo Mats That Do Not Fade
100% nylon pile from 400g/m2 to 950g/m2 on a nitrile rubber back, colour fastness graded 4 to 4.5, minimum order one piece.
Motorcycle And Garage Mats
Pit Mats Built To Hold Fuel And Find Bolts
Nylon pile over nitrile or TPR backing, rubber edged on all sides, sized to the machine and the working space around it.
What We Make
Custom Mats and Rugs Made to Your Artwork
Custom-printed mats and rugs: entrance logo mats, motorcycle and garage pit mats, office and gaming chair mats, kids rugs, counter and bar mats, anti fatigue mats and hand-tufted carpets.
1
Who We Serve
Brands, dealers, promotional distributors, hospitality groups and retailers who need their own artwork on a floor product, in quantities from a single piece.
2
The Problem We Solve
Most mat factories start at container quantities and charge for artwork. We run logo entrance mats and pit mats from 1 piece, prepare the artwork free, and send a proof for your approval before anything is printed.
3
Why Buyers Choose Us
Shenzhen FunHoming has supplied custom mats since 2014. Entrance logo mats are solution dyed with colour fastness graded 4 to 4.5, samples run in 7 to 10 days and mass production in 20 to 30 days, and we export directly using our own forwarder or one you nominate.
Product Range
Fourteen Mat Families in One Factory
Each family is built on a different surface and backing combination. Pick the family first, then the construction inside it.
3 products
Door Mat
Entrance matting printed with your logo, in nylon or polyester on the backing that suits your…
Explore range →
7 products
Chair Mat
Floor protection under rolling chairs, in PVC for hard floors and carpet or in printed fabric for gaming and…
Explore range →
5 products
Counter Mat
Branded counter-top surfaces: sealed advertising mats, swappable insert mats, bar runners, salon station pads…
Explore range →9 products
Garage Mat
Motorcycle and garage pit mats that hold fuel and oil in the pad, keep dropped hardware findable, and carry…
Explore range →
5 products
Kids Rug
Printed play and learning rugs for bedrooms, play rooms and classrooms, in low-pile polyester on non-slip…
Explore range →
1 products
Area Rug
Printed polyester velvet shag rugs for living rooms and bedrooms, with no colour limitation and no art…
Explore range →
1 products
Tufted Carpet
Hand-tufted rugs with carved colour separation and a die-out outline that follows your…
Explore range →
1 products
Bath Mat
Microfiber bath mats on TPE non-slip backings, machine washable and sized to clear a door…
Explore range →
1 products
Kitchen Mat
Comfort matting for people who stand to work, in foam PVC runners and laminated anti fatigue…
Explore range →
1 products
Anti Fatigue Floor Mat
Laminated standing mats with a high-density PU foam core that is specified not to lose support over…
Explore range →
1 products
Dart Mat
Heavy-duty dart mats that protect both the floor and the darts from bounce-outs, printed to your…
Explore range →
1 products
Drum Mat
Drum rugs on a high-density non-slip latex bottom, hemmed by hand, printed with any…
Explore range →
1 products
Golf Putting Mat
Chromojet-printed putting mats with alignment guides at set distances, on a heavy rubber backing that lies…
Explore range →Selected Products
Products We Are Asked For Most
Sixteen of the 37 products we make. Every one is produced to your own size, colour and artwork.
Garage Mat
Race Paddock Motorcycle Pit Mat with Nitrile Rubber Backing
A pit mat sized for a single machine, with a carpeted nylon top that doubles as a non-scratch surface for parts, tools and a shop…
View specification →
Garage Mat
Nylon and TPR Motorcycle Pit Mat with Customized Logo
A TPR-backed version of our pit mat for buyers who want the same printed nylon surface with a thermoplastic rubber backing. It is oil…
View specification →
Garage Mat
Custom Logo Motorcycle Racing Mat for Garage and Service Zone
A racing mat made to the format many race organisers now require in the service zone. The material mix stops spilt fuel soaking into…
View specification →
Garage Mat
Washable Non-Slip Motorcycle Work Mat for Parking and Servicing
A washable work mat for parking and servicing, with a 3.5mm 100% nylon pile that absorbs oil and water and nitrile rubber edging on…
View specification →
Garage Mat
Non-Slip Oil Absorbing Garage Parking Mat with Logo
A racing-style parking mat for garages and paddocks that keeps fluids in the pad and out of the floor. The same construction is…
View specification →
Garage Mat
Anti Slip Garage Pit Mat with Custom Logo for Repair Shops
A repair-shop pit mat with a nylon carpet working surface and TPR rubber backing. The pile gives you a non-scratch place to put parts,…
View specification →
Garage Mat
Custom Printed Advertising Pit Carpet for Dealer Entrances
A printed pit carpet used as advertising floor space at a dealership entrance or under a display machine. It carries the same 20mm…
View specification →
Tufted Carpet
Sunflower Handmade Tufted Carpet
A hand-tufted rug with a 10mm pile and 4.5lbs/sqm pile weight, cut to a die-out shape rather than a rectangle. Because the outline is…
View specification →
Area Rug
Shag Area Rug for Living Room in Polyester Velvet
A velvet polyester shag rug with a microfiber pile on a non-woven cloth and TPR backing. It is printed rather than woven, so any…
View specification →
Bath Mat
Microfiber Bath Mat with TPE Non-Slip Backing
A microfiber bath mat on a TPE backing, made in 60x40cm, 75x50cm and 80x50cm or to a custom size. The 0.6-inch pile is deep enough to…
View specification →
Advertising Counter Mat
Sealed Advertising Counter Mat in PVC and Rubber
A point-of-sale counter mat built as a PVC surface over printed paper on a rubber backing, sealed all the way around so the print…
View specification →
Advertising Counter Mat
A3 and A4 Insert Counter Mat with Swappable Artwork
A counter mat with a clear PVC top welded to a foam base along three edges, leaving the fourth open so you slide your own printed…
View specification →
Barber Mat
Salon and Barbershop Work Station Pad in PVC
A 100% PVC station pad at 450x300x10mm, moulded with different sized compartments so clippers, scissors, combs and brushes each sit in…
View specification →
Mouse Pad
Large RGB Gaming Mouse Pad with Fabric Surface
A desk-width gaming pad with a fabric tracking surface on a non-slip rubber bottom, lit by an RGB edge with 9 static colours and 6…
View specification →
Bar Mat
Custom Branded PVC Bar Mat with Moulded Dimples
A 100% PVC bar runner at 60x10x1cm, moulded with dimples that stop glasses and bottles sliding while catching the drips underneath…
View specification →Who We Serve
Six Industries We Supply Every Week
The construction changes with the industry. These pages set out the problem each one brings us and the products that answer it.
Hotels and Hospitality
Hotels, restaurants and bars need floor products that carry the brand at the door and survive a cleaning schedule that runs every day.
Motorcycle and Powersports
Dealers, race teams and aftermarket brands use pit mats as working equipment and as brand space, often at the same time.
Retail and Promotional
Campaign artwork changes faster than most production minimums allow. These products are built so branding can change per branch, per season or per campaign.
Office and Workspace
Floor protection under chairs and comfort matting under standing workers, specified separately for hard floors and for carpet.
Salon and Barbershop
Station pads and standing mats for spaces where staff are on their feet all day and the counter takes product, water and metal tools.
Education and Early Years
Classroom and nursery rugs that carry teaching content and survive being sat on, jumped on and cleaned every week.
The Numbers That Matter
What You Can Hold Us To
Every figure here comes from our own published product specifications, not from a marketing page.
2014
Supplying Custom Mats Since
37
Products In Range
1 piece
Logo Mat MOQ
7-10 days
Sample Lead Time
20-30 days
Production Lead Time
4-4.5 grade
Colour Fastness
How We Work
From Your Logo File to Mats on the Floor
Three routes through our process, depending on whether you are branding a site, testing a design, or buying blanks to print yourself.
1
Custom Logo Mat Program
The full path from a logo file to mats on the floor at your sites, with a proof step before anything is printed.
2Low MOQ and Sampling
How to test a design, a construction or a market without committing to a container.
3Sublimation Blank Supply
For print businesses that want to hold one blank and print every design themselves.
Knowledge Center
Specification Guides Written for Buyers
Pile weight, backing material, artwork limits and minimum order quantities, explained so you can specify correctly the first time.
Buying Guide
How to Choose a Logo Mat Pile Weight
Pile weight is the single specification that decides whether an entrance mat still looks right after a year. Here is…
Read guide →
Design Guide
Preparing Artwork for Printed Mats
Printing onto fibre is not printing onto paper. Two rules about lettering and contrast explain most of the…
Read guide →
Comparison
Chair Mat for Carpet or Hard Floor
Buying the wrong chair mat damages the floor you bought it to protect. The difference is on the underside, and it is…
Read guide →
Product Guide
What Makes a Motorcycle Pit Mat Work
A pit mat has three jobs: hold fluid, hold hardware and hold still. Each one comes from a specific part of the…
Read guide →Questions Buyers Ask Us First
The answers below come straight from our own terms of business.
Is there a requirement of minimum order quantity?
No, small quantity is acceptable. Printed nylon logo mats and motorcycle pit mats run from one piece; printed counter mats, bath mats and area rugs carry a per-design minimum, which we state per product.
Can I get a sample for free?
Yes. We provide 1 pc sample in our existing designs within 20x30cm free of charge, with freight collect. For a sample in your own design, the sample cost depends on the size.
How can I get a quote?
Our products are all customised and prices vary with size and quantity. Send the item, size and quantity you need and we calculate the cost and provide a comprehensive quotation sheet.
Can the mats be exactly the same as my design?
Printing onto a fibre surface is not the same as printing on paper. Fibres absorb dyes differently, so colours and design are matched as closely as possible. Avoid combinations of very similar colours with little contrast.
Do I need to pay an art fee for a custom design?
No, the art fee is free. You can supply your own design in JPG, AI or PDF, noting that letters have to be at least 4 cm to be readable on the mat. Or send a logo and our designer produces the artwork for your approval before production.
How do I find a freight forwarder?
Shenzhen FunHoming has extensive experience in direct exporting to major cities. We offer our own freight forwarder services and select one that provides good service and competitive pricing for your address. We are also open to using a forwarder of your choice.
What are your lead times?
On our nylon logo mats, 7 to 10 days for a sample and 20 to 30 days for mass production. Lead times on other constructions are confirmed with your quotation.
Send Us the Item, the Size and the Quantity
Prices depend on both, so we cost your actual requirement and return a comprehensive quotation sheet rather than a price range.