Spare Parts and Maintenance
Equipment is the first of the four factors that affect hole location accuracy. Regular check and maintenance lets problems be detected and wiped out as early as possible which is what keeps working accuracy.
Equipment is the first of the four factors that affect hole location accuracy. Regular check and maintenance lets problems be detected and wiped out as early as possible which is what keeps working accuracy.
From Requirement Analysis to Final Delivery
Eight stages. Each one exists because a project has gone wrong at that point before.
Daily Maintenance
Ten items before and after the machine runs each day covering appearance spindle and tool cassette tooling computer electric cabin lubricant oil cooling liquid air pipe tooling box and shelf.
First Level Weekly
Nine items done by the night shift team taking about one hour with the power cut off first. Cleaning inside and outside lubricating the worktable cleaning the collet and sorting the computer cables.
Second Level Monthly
Ten items done by the day shift team with repair staff included taking about one and a half hours. It adds the guide rail cover removal cleaning and lubrication the limit switch check and the electric cabin fan filter.
Spare Part Stock
Drill bits milling cutters collets ball screws guide rails with slide blocks inverters spindles bearings armature disc springs and PLC cards.
Service Stations
Three service stations located in South China East China and North China respond to problems raised in customer factories and carry the regular machine maintenance.
Overseas Support
Partners abroad take care of after sale service outside China.
Consumable Replenishment
Drill bits and milling cutters are supplied in all diameters and specifications against your part list.
Accuracy Recovery
Where accuracy has drifted the four factor check is applied. Equipment technics parameters tool status and operator skill in that order.
Machines in This Solution
PCB Drill Bits Milling Cutters and Consumable Parts
DLCNC fully supports customers for spare part sourcing and supply on the machine.
D2X PCB Drilling Machine
Independent Z axis structure on XYZ ball screw drive. The independent Z axis holds the vertical accuracy of the machine and improves th...
4 Heads PCB CNC Routing Machine
Four head routing machine independently developed by DLCNC for steady production routing of circuit boards.
Related Applications and Guides
Multilayer Rigid PCB Drilling
Drilling takes up the longest time of the whole PCB process and around 90 percent of it is performed by mechan...
PCB Depaneling and Profiling
Routing is where the panel becomes the product. DLCNC machines are applied in the precision drilling and milli...
PCB Drilling Machine Maintenance Guideline
This maintenance guideline covers the PCB board drilling machine as a CNC process centre. It also applies to t...
PCB Drilling Hole Location Accuracy and CPK
Good hole location accuracy makes the following processes easier and to some extent even makes up for weakness...
Spare Parts and Maintenance FAQ
How often should the machine be maintained
Daily before and after running weekly at first level and monthly at second level. The full item list is published in the maintenance guideline.
Who carries out the weekly maintenance
The night shift team on duty in turn taking about one hour with the power cut off first.
Does a ball screw need recalibration
Ball screw driven tables need recalibration about every year. Air driven tables have lower abrasion but higher energy consumption from the air supply.
Can I get spares for a machine bought years ago
Send the machine model and the part specification. Standard components come from THK Hiwin Delta and Westwind and equivalent brands.
Start With the Requirement Not the Catalogue
Send the numbers you have to hit. Board format hole or slot geometry cycle time and the environment the machine will live in.
CAD and drawing files are accepted on request through WhatsApp or email. No form to fill in.