Hose Reel without Hose for 45 m of 1/2" Hose YM3401
YM3401 is a hose reel in 1/2".
What YM3401 Is
YM3401 is a hose reel in 1/2". It stores up to 45 metres of 1/2 inch or 13 mm hose. It ships on colour box, 5 pieces per carton at 0.07 CBM. Capacity is rated against 1/2 inch or 13 mm hose, the same size the YIMAY connectors and menders are built for.
Key Benefits
- Capacity is stated against a specific hose size, up to 45 m of 1/2 inch or 13 mm hose, so the claim can be checked
- Published carton data, 5 pieces at 0.07 CBM, so landed cost can be calculated before you order
- Stated capacity given against a specific hose size 1/2 inch or 13 mm
- Cart and reel versions of the same storage capacity so the buyer picks the format
What Goes Wrong Without It
- Hose left coiled on the ground because there is nowhere to put it
- Capacity claims that only hold if the hose is wound perfectly
- Plastic frames that crack at the axle after one season
- Bulky cartons that wreck the CBM on a mixed container
What Is Actually In the Box
- Hose size 1/2"
- Storage capacity up to 45 m of 1/2 inch or 13 mm hose
- Retail pack colour box
- Hand crank drum with a hose guide
- Inlet connector for the supply hose
YM3401 Technical and Carton Data
Every figure below comes from our production and packing record. Where a value is not confirmed it is left out rather than estimated.
| Model | YM3401 |
|---|---|
| Product Type | Hose Reel |
| Hose Size | 1/2" |
| Hose Capacity | Up to 45 m of 1/2" or 13 mm hose |
| Retail Packing | Colour box |
| Pieces per Carton | 5 |
| Carton Size | 59 x 35 x 34 cm |
| CBM per Carton | 0.07 |
| Net Weight per Carton | 7.2 kg |
| Gross Weight per Carton | 8.2 kg |
Materials
- Moulded plastic body
- Rubber sealing washer at the coupling
Manufacturing Process
- Injection moulding
- Over moulding of the soft coated grip
- Assembly and seal fitting
- Water test
- Blister or box packing
What We Check Before It Ships
- Dimensional check against the production specification on every run
- Water test on assembled couplings and valve bodies
- Visual inspection of the moulding and of any plated or coated surface
- Carton weight and count verification against the published packing data
What Can Be Changed for Your Brand
- Colour change to your Pantone references subject to confirmation on this body
- Private label blister card or colour box printed to your artwork
- Barcode and country of origin marking to your market requirement
- Carton marking and export documentation set agreed at order stage
Buyers This Model Suits
- Garden retail buyers who need reels at three price points
- Importers shipping mixed containers where CBM per unit matters
- DIY chains adding a metal frame flagship above the plastic range
- Online sellers offering hose plus reel bundles
Where It Gets Used
- Fixed storage beside an outdoor tap
- Keeping a long hose off the ground between uses
- Winter storage of a drained hose
- Retail flagship at the top of a storage range
How to Get the Best Out of YM3401
The four points end customers most often get wrong. Worth putting on the pack or in the listing copy.
Step 1
Wind the hose under light tension so the stated capacity is achievable
Step 2
Keep the first metre of hose free so the inlet is not strained
Step 3
Drain the hose before winter storage
Step 4
Check wheel and axle fixings at the start of each season
How YM3401 Differs From Its Siblings
These models share a body family. The difference is finish, size or feature, not fit, which is what lets them sit on the same wall at different price points.
Hose Reel without Hose for 60 m of 1/2" Hose YM3201
YM3201 stores up to 60 m against 45 m on YM3401. Pick the capacity from the hose length your customer actually runs.
Hose Cart without Hose for 45 m of 1/2" Hose YM3301
YM3301 is a hose cart. YM3401 is a hose reel, and the two are usually sold alongside each other rather than instead of each other.
Buyer Types That Stock YM3401
Garden Centres and DIY Retail
A garden aisle has to work as one wall. The customer who picks up a spray gun walks three metres to the connectors and expects them to fit. …
Importers and Private Label Brands
A house brand only works if the products underneath it are consistent. Our catalogue is deliberately built as variants of a small number of …
Online Sellers and Marketplaces
Marketplace listings live or die on the spec table and on the return rate. Both improve when the supplier publishes real carton and weight d…
Guides That Cover This Product
Garden Hose Sizes Explained for Retail Buyers
Why 1/2 inch, 5/8 inch and 3/4 inch are not interchangeable and how hose size decides every other product on your watering wall.
Buying GuideHose Reel and Cart Capacity Explained
Capacity claims only mean something when they name a hose size. Here is how to read them and how to pick between a reel and a cart.
Process GuideReading Carton Data and Planning a Container
CBM, pieces per carton, net and gross weight. What each number is for and how to build a watering container that actually fills.
Other Models in the Carts and Reels Family
YM3401 Questions Buyers Ask
How is YM3401 packed for shipping?
Colour box packing, 5 pieces per carton, in a 59 x 35 x 34 cm carton at 0.07 CBM, 7.2 kg net and 8.2 kg gross.
What hose size does YM3401 take?
1/2". It mates with the connectors, menders and tap adaptors in the same size across the YIMAY fitting range.
How much hose does YM3401 hold?
Up to 45 metres of 1/2 inch or 13 mm hose. A thicker hose will reduce that figure, so match the capacity to the hose you actually sell.
Is the hose included?
Not on this model. The capacity figure tells you how much 1/2 inch or 13 mm hose the drum holds, so it pairs with whichever hose programme you already run.
Can YM3401 be supplied under our own brand?
Yes. Private label and customisation are standard here. Send your artwork, colour references and target volume and we will quote it. Sample delivery is 30 days.
Request Pricing on YM3401
Send your annual volume, your destination market and whether you need private label artwork. Sample delivery is 30 days.