Robotics and System Integration
Mrright provides system integrators with a consolidated sourcing solution for robot cells, gantries, and custom automation systems.
Machinery and Robot Accessories
Holder for Robot
Mrright supplies robot holders and sucker mounting arms as pre-assembled kits from stock in Zhuhai. These aluminium and steel components fix suction cups, grippers and sensors to robot arms or gantry beams.
Overview
What This Part Does in Your Machine
Mrright supplies robot holders and sucker mounting arms as pre-assembled kits from stock in Zhuhai. These aluminium and steel components fix suction cups, grippers and sensors to robot arms or gantry beams. Each kit is built to match the robot's payload, tool weight and mounting interface, so the end-of-arm tool arrives ready for installation.
Key Benefits
- Parts are supplied as a pre-assembled kit, reducing on-site assembly time and error risk
- Stock in Zhuhai allows faster shipping than ordering from individual suppliers or factory channels
- Mixed part lists including holders, vacuum fittings and mounting arms ship as one consolidated order
- Single-unit replacements are accepted, which avoids long lead times for spare tooling
- Kit configuration matches robot payload and mounting interface, reducing integration issues
Problems It Solves
- A robot tool fails because the mounting hardware does not match the robot's payload or interface
- On-site assembly of mounting arms leads to misaligned clamps, incorrect thread sizes or loose joints
- Separate orders for clamps, bars, fittings and holders increase freight cost and delay installation
- Long lead times from factory suppliers when only one part of a kit is needed as a spare
- Mismatched thread sizes or bore diameters between the clamp and the mounting bar cause tool instability
Who It Is For
- Robot cell integrators building or upgrading automated handling systems
- Machine builders adding vision-guided pick-and-place functions to their equipment
- Maintenance and MRO buyers replacing a broken or worn mounting kit
- System integrators sourcing multi-part tooling kits from China without dealing with multiple suppliers
Application
Where Holder for Robot Is Used
Application Scenarios
- Replacing a damaged end-of-arm tool on a running packaging line where the original kit is no longer available
- Building a new robot cell that requires a custom mounting arm with vacuum fittings and spring-loaded cup holders
- Integrating a new gripper or sensor onto a robot arm where the mounting interface must match the existing hardware
- Holding spare mounting kits on hand for maintenance teams to quickly swap out failed tools
Technical Features
- Aluminium and steel construction for strength and lightweight handling
- Cross clamps, round and square profile bars, swivel joints, spring-loaded cup holders and vacuum fittings included
- Configurable to match bar diameter, clamp bore, thread size, spring stroke and total tool weight
- Designed for use with suction cups, grippers and sensors on robot arms or gantry beams
- Assembled kits ready for mounting without additional machining or custom fabrication
Specifications
What Is Confirmed Before You Order
Values that depend on the model you choose are marked as confirmed on quotation rather than guessed at here.
| Product type | Robot holder and sucker mounting arm kit |
|---|---|
| Material | Aluminium and steel |
| Components included | Cross clamps, profile bars, swivel joints, spring-loaded holders, vacuum fittings |
| Configurable features | Bar diameter, clamp bore, thread size, spring stroke, total tool weight |
| Mounting interface | Matches robot arm or gantry beam mounting requirements |
| Minimum order | Single unit accepted |
| Ships from | Zhuhai, Guangdong, China |
Checks Before Despatch
- Clamp bore and bar diameter verified against the robot arm or gantry beam mounting point before assembly
- Thread size at the cup end confirmed against the suction cup or sensor mounting requirement
- Spring stroke measured to match the expected compensation range under load
- Total tool weight calculated and checked against the robot payload limit
- Kit photographed before dispatch to confirm all parts are included and assembled correctly
Customisation and Selection
- Kit built to match the robot's payload and mounting interface using the customer's machine drawing or photo
- Bar diameter, clamp bore and thread size selected based on the existing hardware or drawing
- Spring stroke adjusted to match the required compensation for uneven or flexible workpieces
- Total tool weight calculated and confirmed to stay within the robot's payload limit
- Kit assembled with the correct orientation of swivel joints and fittings for the application
Comparison
How It Compares
| Buying parts separately from multiple suppliers | A pre-assembled kit reduces on-site assembly time and eliminates mismatched components |
|---|---|
| Using generic or off-the-shelf mounting hardware | Custom kits match the robot's payload and interface, reducing tool instability or failure |
| Ordering from a robot manufacturer's spare parts department | Single-unit orders and mixed part lists are accepted here, and shipping is consolidated |
Use Guide
What to Send and What to Check
- Send a photo of the existing mounting kit or the robot arm interface
- Confirm bar diameter, clamp bore, thread size and spring stroke from the current tool
- Provide the total weight of the final tool including suction cups, grippers and sensors
- State the robot model and payload limit so the kit can be sized correctly
- Request the assembly diagram or orientation guide if the tool has swivel joints or angled fittings
Applications
Industries Using This Part
Plastics and Rubber Processing
Mrright supplies replacement and build parts for injection moulding and extrusion plants that use take-out robots and sprue pickers.
Packaging Machinery
Mrright supplies automation components and accessories for packaging machinery builders and users.
Solutions
Solutions Built Around It
End of Arm Tooling Build
Building a vacuum gripper is a parts list, not a single purchase. Cups, holders, bars, clamps and fittings are quoted as one tool.
Obsolete Axis Replacement
A machine is down, the servo axis has failed and the original model is discontinued. This is the route from a nameplate photo to a working axis on the shelf.
Guides
Read Before You Specify
Related
Related Components
Machinery and Robot Accessories
Vacuum Rubber Suckers
Mrright supplies vacuum rubber suckers for robot end-of-arm tooling and pick-and-place heads, used to lift sheet, board, film, glass, and packaging materials. Stock is held in Zhuhai and shipped worldwide on inquiry.
Automation PLC and Motion Components
Industrial Sensors
Mrright supplies industrial sensors for machine automation including inductive and capacitive proximity switches, photoelectric sensors, fibre amplifiers, magnetic cylinder switches, and pressure switches. Multi-brand stock is held in Zhuhai and shipped worldwide on inquiry.
Automation PLC and Motion Components
Torque Motor and DD Motor
Mrright supplies torque motors and direct drive (DD) motors with their matched drives from stock in Zhuhai. These motors are designed for low-speed, high-torque applications where backlash must be eliminated, such as indexing tables, rotary stages, capping and labelling heads, and wafer or panel handling.
FAQ
Questions About Holder for Robot
Can I buy just one part of the holder kit as a spare?
Yes. Single-unit orders are accepted. Send a photo of the part or the model number and we confirm availability and price.
Do you supply the complete mounting kit, or just the parts?
We supply the complete kit assembled, including clamps, bars, fittings and holders, ready for mounting.
Which robot brands do your kits support?
Kits are built to match the mounting interface and payload of the robot arm, not a specific brand. Send the mounting dimensions and robot payload.
Can I mix holders with sensors and vacuum cups in one order?
Yes. Robot accessories such as holders, sensors, vacuum cups and fittings are consolidated into one shipment.
What do you need to quote a holder kit?
Send a photo of the existing kit or the robot arm interface, the bar diameter, clamp bore, thread size, spring stroke, and total tool weight.
Get Holder for Robot Quoted
Send the model code or a nameplate photo and availability comes back in the same thread.