Workstation Sink Buying Guide
Workstation sinks sell on the accessory photograph. They get returned on accessory fit. Everything worth checking is in the few millimetres of the ledge.
The ledge is the product
A ledge machined into the bowl walls is part of the fabrication. A rail screwed to the inside is not the same thing and will loosen.
Ledge width decides which accessories can run on it, so it has to be fixed before boards and colanders are quoted.
Single ledge, double ledge and stepped ledges all behave differently — a double ledge lets two accessories sit at different heights.
Accessory fit is the return rate
Boards, colanders and racks have to be cut to the ledge of the sink they ship with, not to a nominal size.
If a range carries several bowl sizes, the accessories multiply with it. Decide early whether you want one ledge width across the range.
Check that a wet board still slides. A board that binds when damp will be described as faulty.
Faucet clearance
A board sliding along the ledge has to pass under the spout. Measure the clearance with the accessory in place, not with an empty sink.
Pedestal-mounted and top-loading spouts exist precisely to solve this.
What buyers actually use
The cutting board and the colander get used daily. The roll-up rack gets used and then stored.
A sensible entry SKU is board plus colander, with the rack as an upgrade.
Products This Guide Refers To
One basin that replaces the sink, the drainer and half the worktop
View product
Built for the compact kitchens that still expect a full prep station
View product
The professional spring faucet, sized for a domestic worktop
View productSeen On Our Own Production
Questions On This Topic
Can you build one ledge width across a whole range?
Yes, and it is usually the right decision — it keeps accessories interchangeable.
Do you supply accessories separately?
Yes, as spares or as a separate SKU.
Is a top-loading faucet necessary?
Only where the board would otherwise foul the spout. On a wide ledge a standard spout may clear it.
Specifying A Sink And Want A Second Opinion
Send the drawing or the sample. We will tell you what will hold and what will not before you commit to it.