Custom 18K and 14K fine jewellery, designed, cast and set in Shuibei, Shenzhen since 2015 Enquiries answered within 24 hours, GMT+8 [email protected] +86 132-4982-2336
  1. Home
  2. Project Photographs
Project Photographs

Four Installations Photographed By The Factory

Client names, contract values and quantities are not published by the manufacturer and are not stated here. What each page describes is what is visible in the photograph, what the published specification says, and what the specification decisions behind that kind of installation actually are.

Loose matched radiant cut diamonds laid out on a white ground before setting at BH Jewelry
Project Photograph

Matched Stone Work: An Eternity Band And A Tennis Line

On a full eternity band every stone sits beside two others at the same height under the same light, on a curve that meets itself. On a tennis line the row has to read identically for seven inches while bending. In both cases a stone a shade warmer or a fraction longer is visible from across a table.

Read what was specified
A halo diamond engagement ring photographed on a black ground by BH Jewelry
Project Photograph

Certified Centre Stones: Two GIA Solitaires And A Ceylon Sapphire

When the stone is chosen from a report, every remaining decision is in the mount, and the two that matter are height and weight. A high cathedral head levers the stone every time the hand catches something. A mount cast too light flexes, and flexing is what loosens prongs.

Read what was specified
Carved light green jadeite pendants with diamond-set bails made by BH Jewelry
Project Photograph

Jade And Pearl: Mounting Material Nobody At The Bench Chose

None of this material can be ordered to a size. A carving arrives finished, a cabochon is hand cut, a bangle is whatever the rough allowed, and a pearl is drilled exactly once. The mount has to be drawn around what exists rather than the stone being adjusted to a standard seat.

Read what was specified
A five motif clover bracelet in onyx and diamond held on a white cloth at BH Jewelry
Project Photograph

Private Label: A Five Motif Bracelet And A Pave Statement Piece

Repeatability. A motif bracelet has to bead identically across five separate panels, and a pave form has to close its stone rows down a taper without the bead work going ragged. Both have to be buildable again, months later, to the same standard.

Read what was specified
An ornate geometric rose gold spinner band ring photographed at BH Jewelry
Project Photograph

Hand Assembly: A Working Spinner Ring And A Sculpted Shank

A spinner is a mechanical assembly that has to keep turning for years without seizing, loosening or catching a stone, and each one is assembled by hand. A sculpted shoulder has to read as its shape from above while still sitting flat against the next finger.

Read what was specified

Planning Something Similar

Send a photograph of the position, the mounting available and the quantity. A drawing and a quotation come back by email.