Your Design, Set By Hand In Our Own Shenzhen Workshop
BH Jewelry has made custom 18K and 14K fine jewellery in Shuibei, Shenzhen since 2015: diamond and gemstone rings, bracelets, pendants and chains, cut from your sketch or your CAD rather than from a catalogue.
Where The Job Is Matching, Not Metal
Eternity bands, tennis lines and pave work live on whether every stone matches its neighbour in colour, clarity and cut. Stones are hand selected before any metal is cut, which is why these runs are quoted per piece.
We Build It, You Sell It, Under Your Own Label
The workshop accepts OEM and ODM work, engraves your own label, supplies product photography and handles production and delivery, so a small brand can carry matched stone jewellery without holding inventory.
Fine Jewellery That Is Still Assembled By Hand
Spinner mechanisms, pave over compound curves, carved jade mounts and colour sequences laid out on the bench before setting begins. The work that cannot be automated is the reason to use a workshop rather than a warehouse.
Four Families Of Fine Jewellery From One Shenzhen Workshop
BH Jewelry makes custom fine jewellery in 18K and 14K gold and 925 sterling silver, set with natural diamonds, lab grown diamonds, sapphire, emerald, jadeite and South Sea pearl. The published range runs to sixteen pieces across rings, bracelets, pendants and chains, and the factory states it has developed over 10,000 designs. Every one of the sixteen is on this site.
제품정보
Certified solitaires, coloured stone halos, full eternity bands and mechanical statement rings, all sized and built to order in 18K.
Explore the range
팔찌
Tennis lines, motif bracelets, coloured stone clusters and certified Grade A jade bangles, matched across the length rather than per stone.
Explore the range
Pendants
Carved and cabochon jadeite mounts, and dense pave statement pieces in solid 18K, built around the stone rather than around a standard seat.
Explore the range
Jewelry Chains
Diamond-set Cuban link chain produced to order in 925 sterling silver and 9K, 10K, 14K or 18K gold, in the buyer's own width and finish.
Explore the rangePublished With The Specification Not With Adjectives
One product from each family below, and all 16 on a single page with nothing paginated. Every page carries the metal, the karat, the stone, the grade and the dimensions the factory actually publishes, and says so plainly where it publishes none.
5.7ct Radiant Cut Diamond Eternity Band
A full eternity band carrying approximately 5.7 cttw of elongated radiant cut white diamonds in a shared prong setting, hand made in solid 18K gold.
See the specification
Four-Leaf Clover Motif Bracelet In Onyx And Diamond
A five-motif clover bracelet in 750 rose gold, alternating black onyx panels with a diamond-set motif, on a fine cable chain measuring approximately 19.3 cm.
See the specification
Jadeite Cabochon And Diamond Pendant Necklace
An oval jadeite cabochon of intense green colour and very good translucency, framed with brilliant-cut diamonds and mounted in 18 karat white gold.
See the specificationGold And Natural Diamond Cuban Link Chain
Diamond-set Cuban link chains produced in 925 sterling silver and 9K, 10K, 14K or 18K gold, in a range of finishes, stone settings and platings to the buyer's brief.
See the specificationFive Kinds Of Buyer With Five Different Priorities
Bridal and engagement retailers, independent brands running private label lines, fine jewellery wholesalers, jade and gemstone dealers, and online sellers who want to trade without carrying stock. The factory states it has custom agents around the world.
Bridal And Engagement Retailers
Certified centre stones, matched bands and a production window short enough to hold a proposal date.
See what they specifyIndependent Brands And Private Label
Your silhouette, your label, built from CAD you approve, at quantities a small brand can actually carry.
See what they specifyFine Jewellery Wholesalers
Matched stone programmes across metals and karats, repeatable from a recorded specification rather than from memory.
See what they specifyJade And Gemstone Dealers
Mounts drawn around stones you already own, with the material's characteristics photographed and disclosed before money moves.
See what they specifyOnline Sellers And Dropship Brands
Production, photography and delivery handled at the factory, so the seller runs a website instead of a stockroom.
See what they specifyCustom Jewellery Fails At The Bench, Not In The Specification
Most custom jewellery orders fail somewhere between the drawing and the bench. A stone is matched loosely and a tennis line dims halfway along. A jade cabochon is set into a closed back and reads as opaque green. A pearl is drilled off axis and the ring sits crooked. These are all decisions taken by a person holding the piece, and they cannot be specified around.
자주 묻는 질문
- Stones matched loosely, so a tennis line brightens and dims along the wrist
- Translucent jadeite dropped into a closed-back mount and reading as opaque
- Pearls drilled off axis, so the finished ring sits crooked on the hand
- Plated or gold-filled pieces invoiced as solid, with no finished metal weight
- A quotation against a photograph, revised once a drawing finally exists
What This Factory Publishes Instead
- The workshop designs, casts, sets, drills and polishes in one building in Shuibei, Shenzhen, which is where the decisions stay with the person who can see the stone. It publishes what it will and will not state: GIA certificates on certified stones, Type A certification on jade, nickel-safe alloys, and photographs of the actual piece where the material is individual.
- A dimensioned drawing and a CAD model approved before any wax is cut
- A wax you can hold and size before metal is committed
- A stone layout photographed for approval before the first stone is set
Eight Stages From A Napkin Sketch To A Finished Piece
These are the stages the factory publishes on its own process and solutions boards, and the specific failure each one exists to prevent.
Jewelry Sketch
A piece that is wrong on paper is wrong in gold.
Your napkin sketch, reference photograph or vector artwork is redrawn by the design team into a working drawing with dimensions, stone sizes and metal weight marked.
Jewelry CAD
The model is where cost is decided, not where it is discovered.
The drawing becomes a 3D CAD model. Stone seats, wall thickness and gallery openings are all set here, and the model is what gets approved before anything is cut.
Jewelry Wax
Wax is the cheapest place to change your mind.
Molten wax is injected into the mould cavity under pressure to produce the model for casting. A wax can be held, sized and rejected at a fraction of the cost of a casting.
Jewelry Casting
Metal goes in once.
The wax is invested and burned out, and the piece is cast in the specified karat and colour. Casting faults are found here rather than after a week of setting work.
Jewelry Filing
Surplus metal is removed before it becomes a permanent feature.
Filing takes off the surplus metal from the casting and smooths the surface, the step that decides whether the finished piece feels made or merely produced.
Jewelry Stone Setting
This is the part nobody can outsource to a machine.
Prong, bezel, channel and pave work, done by hand at the bench. Colour sequences are laid out and approved before the first stone goes in.
Jewelry Polishing
Polish is the last chance and the first thing seen.
The piece is polished stage by stage, working around soft and treated stones rather than through them.
Jewelry Cleaning And Inspection
Nothing leaves on the assumption that it is right.
Each piece is cleaned and inspected under magnification: prong tips, seam clearance, bead height, clasp function and, where relevant, the certificate number against the stone.
Work Photographed At Our Own Bench
Client names, order values and quantities are not published by the manufacturer, so they are not stated here. What is described is what is visible in the photograph and what the specification says.
Matched Stone Work: An Eternity Band And A Tennis Line
On a full eternity band every stone sits beside two others at the same height under the same light, on a curve that meets itself. On a tennis line the row has to read identically for seven inches while bending. In both cases a stone a shade warmer or a fraction longer is visible from across a table.
Read what was specified
Certified Centre Stones: Two GIA Solitaires And A Ceylon Sapphire
When the stone is chosen from a report, every remaining decision is in the mount, and the two that matter are height and weight. A high cathedral head levers the stone every time the hand catches something. A mount cast too light flexes, and flexing is what loosens prongs.
Read what was specified
Jade And Pearl: Mounting Material Nobody At The Bench Chose
None of this material can be ordered to a size. A carving arrives finished, a cabochon is hand cut, a bangle is whatever the rough allowed, and a pearl is drilled exactly once. The mount has to be drawn around what exists rather than the stone being adjusted to a standard seat.
Read what was specified
Private Label: A Five Motif Bracelet And A Pave Statement Piece
Repeatability. A motif bracelet has to bead identically across five separate panels, and a pave form has to close its stone rows down a taper without the bead work going ragged. Both have to be buildable again, months later, to the same standard.
Read what was specified
Hand Assembly: A Working Spinner Ring And A Sculpted Shank
A spinner is a mechanical assembly that has to keep turning for years without seizing, loosening or catching a stone, and each one is assembled by hand. A sculpted shoulder has to read as its shape from above while still sitting flat against the next finger.
Read what was specifiedFive Conversations We Have Most Often
Custom Jewellery Development
From a napkin sketch or a reference photograph to a finished, set and polished piece, in eight stages the factory publishes and works to.
Read the stage by stage guideOEM, ODM And Private Label Production
The factory builds and ships; you sell under your own engraved label, with the product photography supplied.
Read the stage by stage guideCAD And 3D Prototyping
A jewellery prototype developed in CAD, so a piece can be reproduced exactly by a computer-controlled process instead of rebuilt from scratch.
Read the stage by stage guideStone Sourcing And Certification
Natural diamonds, lab grown diamonds, coloured stones, jadeite and South Sea pearl bought per order against a written specification.
Read the stage by stage guideCustom Earrings And Matching Sets
Earrings and full suites built from the same stone selection as the ring or pendant they are meant to match.
Read the stage by stage guideNine Guides For People Who Buy Fine Jewellery Wholesale
How to read a grading report without overpaying, where lab grown actually differs from natural, when 14K beats 18K, how a custom piece goes from sketch to casting, and how to buy jadeite, coloured stones and private label work without being burned.
Reading A Diamond Grading Report Without Overpaying
The report tells you four things and implies a fifth. Only two of them are visible on a hand, and those are not the two most buyers pay a premium for.
자주 묻는 질문
Natural Or Lab Grown Diamonds: A Supplier's Practical View
They are the same material and they behave identically at the bench. Everything that separates them is commercial, and that is exactly why the decision belongs to you rather than to your factory.
자주 묻는 질문
18K Or 14K: Which To Specify, And When Silver Is The Right Answer
Karat is a trade-off between colour, hardness and cost, and the right answer changes by market, by product type and by how the piece will be worn.
자주 묻는 질문자주 묻는 질문
당신은 공장 또는 무역 회사입니까?
What is your minimum order quantity?
생산은 얼마나 걸리나요?
Can you work in 14K as well as 18K?
Do you supply certificates?
Will you make a design that is entirely ours?
Can you sell to me if I have no stock and no warehouse?
Why does this site not publish prices?
Tell Us What You Want Made
Send the reference image, the metal and karat, the stone and the size. A drawing and a quotation come back by email or WhatsApp.