Storage Function Coffin Corner 11 G Standard view 1

Storage Function Coffin Corner 11 G Standard view 2

Coffin Corner · Model 13#

Storage Function Coffin Corner 11 G Standard

Injection moulded coffin corners and matching lugs, metallized in gold, silver or bronze and supplied loose or as complete sets with plated steel bars.

Storage Function Coffin Corner
11 G Standard Coffin Corner

FinishBlack
SizeStandard

Request A Quote Request A Sample Email Us

Overview

What This Model Is and Where It Fits

Injection moulded coffin corners and matching lugs, metallized in gold, silver or bronze and supplied loose or as complete sets with plated steel bars.

One supplier for the complete set

Corners, lugs and steel bars leave the same factory in the same finish, so nothing has to be matched afterwards.

Colour held across repeat orders

Plating and metallizing are run in house on two coating lines, and the reference sample stays on file for reorders.

Reinforced where the load sits

Steel bar or steel pipe carries the weight rather than the moulding alone.

Who It Is For

Buyers Who Specify This Part

Casket and coffin factories. Plants running continuous lines that need the same corner profile and the same finish carton after carton.

Funeral supply distributors. Importers who stock sets in several finishes and sell them on to smaller casket builders.

Funeral homes with in-house workshops. Operations that assemble or repair caskets and need replacement corners that match an existing model.

Problems It Solves

What Goes Wrong Without It

Corners from different batches do not match in colour, so a finished casket looks assembled from spare parts.
Thin mouldings crack at the fixing hole when the casket is lifted.
Sourcing corners, lugs and bars from three vendors leaves gaps in the set and slows the line.
Low volume buyers get told the minimum order is a full container.

Application Scenarios

Where It Is Used

Full couch and half couch wooden caskets
Steel and stainless caskets, assembled or knock down
European style coffins with tapered sides
Cremation caskets and lower cost lines

Funeral Supplies

Sample Available

The Starocean brand, recognized for its exceptional quality, presents the model 8# coffin, a product that embodies dignity and respect in the face of life's ultimate passage. Originating from China, this exquisite piece is crafted with the utmost care, ensuring that each coffin meets the highest standards of craftsmanship. The Starocean model 8# is not just a mere vessel for the departed, but a testament to their life and legacy. With its wood material, it represents both strength and elegance, offering a serene final resting place.

Starocean's service commitment extends to providing a free sample of the model 8# for those who wish to experience the quality firsthand before making a decision. This initiative reflects the brand's confidence in their product and dedication to customer satisfaction. The free sample service is a hallmark of Starocean's consideration for its clients' needs and their desire to make the process as smooth as possible during a difficult time.

The model 8# coffin features a standard size that accommodates the typical requirements for a respectful entombment. The locking mechanism, a hinged lid with a latch, ensures that the coffin remains securely closed, providing peace of mind that the integrity of the coffin is maintained. The wood material used in the construction of the coffin is not only durable but also imparts a sense of warmth and natural beauty, honoring the individual within.

Technical Features

Four large corners plus small side corners in the standard set layout
Fixing holes moulded in, so no drilling on the line
Steel bar in long and short lengths for the sides and ends
Recycled PP or ABS available where the specification allows it

Specifications

Technical Data for 13#

Model Number	13#
Colour and Finish	Black
Size	Standard
Style	U.S Casket
Brand	starocean
Place of Origin	china
Sample	Freely

Locking Mechanism
Hinged Lid With Latch

Figures are taken from the factory specification for this model. Confirm the current values with the sales team before issuing a purchase order.

Materials and Manufacturing

How This Part Is Made

Corners and lugs are moulded in PP or ABS, with recycled PP and ABS offered for budget lines. Steel bars and pipes are painted or electroplated to match the moulded parts.

Tooling
Existing moulds cover most standard corner profiles, which removes tooling cost from a new project.
Injection
Parts are moulded on machines from 160 g to 500 g depending on the size of the corner.
Metallizing
Two vacuum metallizing and coating lines apply the gold, silver or bronze finish.
Set assembly
Corners, lugs and cut steel bars are counted into sets and bagged.

Quality Control

Shot samples checked against the reference corner before the run starts
Colour compared against the approved sample under the same light
Fit check of corner to lug and bar before packing
Carton count and drop check before sealing

Certification

ISO 9001 quality system, with SGS and BV reports on product ranges.

See the Trust Center for factory data, production lines and certification scope.

Customization Options

What Can Be Changed

Colour matched to your sample rather than a stock gold
Set content changed, for example bar length or the number of small corners
Own brand poly bag and carton printing
New profiles developed from a drawing, sketch or photo

Get A Custom Solution

Comparison

How It Compares

Corner set from this factory

Corners, lugs and bars in one finish, moulds already available, from 100 sets.

Mixed sourcing

Lower headline price per part, but colour drift between vendors and more freight legs.

Zamak corners

Heavier and more expensive, used where a metal feel is required on premium lines.

Use Guide

Fitting and Handling

Fix the four large corners to the corners of the casket, the small corners to the long sides, then hang the lugs.
Slide the long bars through the side lugs and the short bars through the end lugs.
Tighten from the inside so no fixing shows on the outer face.
Keep one set from each shipment as the colour reference for the next order.

Read the full installation guide

Factory Notes

Further Detail on This Model

The Coffin Corner product, model number Coffin Corner 11# G, is a unique and meticulously crafted wooden coffin designed to meet the highest standards in the funeral industry. This product has been developed for those who seek a dignified and distinctive final resting place for their loved ones, combining traditional craftsmanship with modern design elements. With the sample available freely, potential buyers are invited to experience firsthand the quality and attention to detail that goes into each Coffin Corner.

Made from high-quality wood, the Coffin Corner 11# G is not only sturdy but also exudes a sense of timeless elegance. The wood used in the construction of this coffin is carefully selected for its durability, ensuring that it will stand the test of time. The natural grain of the wood is highlighted through a meticulous finishing process, which also adds to the aesthetic appeal of the coffin, making it suitable for a dignified ceremony.

The standard size of the Coffin Corner 11# G is designed to accommodate individuals of various statures, ensuring a comfortable and respectful fit. The interior of the coffin is lined with soft, luxurious fabric, providing a peaceful and serene environment for the departed. This thoughtful design consideration pays homage to the importance of comfort and respect in the final moments.

One of the most striking features of the Coffin Corner 11# G is its high-angle anatomical design. This particular aspect of the design ensures that the coffin fits seamlessly into the burial plot, and when positioned, it evokes a sense of the 'Wall of Death,' a term that reflects the finality and gravity of the occasion. This design not only serves a practical purpose but also adds a dramatic and solemn touch to the farewell ceremony.

The Coffin Corner 11# G is known for its structural integrity, which is crucial in preventing what is colloquially known as the 'Falling Coffin' scenario. This term refers to the accidental collapse or damage to a coffin during the burial process, which can be a distressing event for attendees. The robust construction of the Coffin Corner ensures that it maintains its integrity from the funeral service to the burial, providing peace of mind to the family and friends of the deceased.

Questions

Questions About This Model

What is the minimum order for 13#?

The minimum order depends on the finish and the quantity of other models in the same shipment. Send the model number on WhatsApp for a current figure.

Which colours can this model be produced in?

The finishes listed for this model are: Black. Other colours can be matched from a physical sample.

Can I order a sample before committing to production?

Yes. Plastic samples are provided free of charge, with freight normally paid by the buyer and credited against a following order.

What is included in one coffin corner set?

A typical set has four large corners, small corners for the long sides, matching lugs, and steel bars in long and short lengths. Exact content varies by model and is listed on each product page.