Round End Tip Casket Accessories ZA06 Brass Plating and High Polishing
The Casket Hardware ZA06 is one kinds of casket hardware and casket fitting, it named "End Cap'' or 'End Tip" which is comply with ZA01, ZA02, ZA03, ZA04 casket arm and wooden bar to fix on wooden casket. Each casket need 2pcs piece of long bar, and 2pcs short bar. Good decoration for casket.
- Coffin Ornaments
- Casket Handles
- MaterialZamak (zinc Alloy)
- FinishAntique Brass
- Minimum Order1000pcs
- Delivery30days
What This Model Is and Where It Fits
Zamak casket hardware in the ZA series for end caps, stationary bars and bolt through fixings, polished and plated for long service.
Matched to the handle range
ZA hardware is plated to the same references as the ZH handle series.
Published load figures
Models such as ZA04 are described as lifting 100 kg per piece.
Antique and bright finishes
Antique brass, antique copper, gold and nickel.
Buyers Who Specify This Part
Casket builders. Plants that need the metal parts of the build to arrive ready to fit.
Hardware distributors. Stockists supplying workshops with fittings by the carton.
Custom and premium builders. Makers of one off or high specification caskets.
What Goes Wrong Without It
- End caps and fittings that do not share the plating tone of the handles.
- Fixings that loosen because the fixing method does not suit the shell.
- Long lead times on small quantities of metal parts.
Where It Is Used
- End caps for wooden bar handles
- Stationary handle assemblies
- Premium casket lines
- Replacement and repair stock
Wooden coffin and casket handle and fittings
Technical Features
- Zamak die castings, polished before plating
- Compatible with wooden dowel and steel pipe bars
- Bolt through fixing on several models
- Sold loose or in sets
Technical Data for ZA06
| Model Number | ZA06 |
|---|---|
| Material | Zamak (zinc Alloy) |
| Colour and Finish | Antique Brass |
| Minimum Order | 1000pcs |
| Packing | each one packed by bag, and the packing in carton |
| Delivery Time | 30days |
| Brand | StarOcean |
| Place of Origin | JiaShan, Zhejiang, China |
| Sample | Freely |
- Wooden casket and coffin handle and extend handle bar
Figures are taken from the factory specification for this model. Confirm the current values with the sales team before issuing a purchase order.
How This Part Is Made
Zamak die castings, polished and electroplated, used with wooden dowels or steel pipe.
Die casting
Parts are cast on the model tooling.
Polishing
Every casting is polished before it goes to plating.
Plating
Antique brass, antique copper, gold or nickel.
Packing
Individually bagged, then cartoned.
Quality Control
- Castings checked for porosity and flash
- Thread and fixing checked on sample pieces
- Plating tone compared with the reference
- Final count before packing
Certification
ISO 9001 quality system, with SGS and BV reports on product ranges.
See the Trust Center for factory data, production lines and certification scope.
What Can Be Changed
- Finish matched to your existing hardware
- Supplied with wooden bar or steel pipe
- New castings from a drawing or sample
- Own brand packaging
How It Compares
ZA zamak hardware
Metal weight, published lift figures, premium finish.
Moulded fittings
Lower cost and lighter, suited to volume lines.
Local hardware
No import lead time, but usually a narrower finish range.
Fitting and Handling
- Confirm the bar diameter before ordering end caps.
- Use the fixing method stated for the model, bolt through or screw.
- Fit hardware after the shell finish has fully cured.
- Keep one plated piece as the reference for reorders.
Further Detail on This Model
Round end tip Casket Hardware ZA06 in antique brass plating and high polised
Questions About This Model
What is the minimum order for ZA06?
The minimum order published for this model is 1000pcs. Smaller trial quantities can be discussed on WhatsApp.
Which colours can this model be produced in?
The finishes listed for this model are: Antique Brass. Other colours can be matched from a physical sample.
How long is production after the order is confirmed?
Delivery published for this model is 30days from confirmation of colour and quantity. Peak season may add time, which is confirmed at order.
What is this model made from?
Zamak (zinc Alloy). Material can be changed where your specification requires it, for example virgin rather than recycled polymer.
Can I order a sample before committing to production?
Yes. Plastic samples are provided free of charge, with freight normally paid by the buyer and credited against a following order.
Do ZA parts fit wooden bars?
Yes. Several ZA models are designed to work with a wooden dowel and end cap arrangement as well as with steel pipe.
Other Models in Casket Hardware
ZA11
Casket Lid Hinge Coffin Accessories Black Appearance OEM / ODM Acceptable
Steel (Iron)
View Details
ZA09
Antique Brass Color Casket Hardware ZA09 Casket Tip and End Cap Premium Iron
Steel (iron)
View Details
ZA07
Steel Casket Hardware ZA07 with Casket Armed Durable in Antique Brass Color
Steel (iron)
View Details
ZA08
Swing Fittings Coffin Ornaments , Casket Handle Hardware ZA08 with Screw Rod
Steel (iron)
View Details
Category
See the full Casket Hardware range with sizes, finishes and set content.
Browse Casket HardwareIndustry
How this part is specified by casket and coffin manufacturers.
Casket and Coffin ManufacturersRequest A Quote for ZA06
Send the model number, quantity, finish and destination port. Quotations normally come back the same working day.