Dark Gold Plastic Coffin Corners 1# DG for Funeral Interment Ornamentation Flower Design
Injection moulded coffin corners and matching lugs, metallized in gold, silver or bronze and supplied loose or as complete sets with plated steel bars.
- Funeral Accessories
- Funeral Interment Ornamentation Flower Coffin Corners
- Dark Gold Plastic Coffin Corners
- MaterialPP Recycle Or ABS New , Metal Pipe
- FinishDark Gold,Light Gold,Copper
- Minimum Order100sets
- Delivery30days
- Capacity30000 Sets/ month
What This Model Is and Where It Fits
Injection moulded coffin corners and matching lugs, metallized in gold, silver or bronze and supplied loose or as complete sets with plated steel bars.
One supplier for the complete set
Corners, lugs and steel bars leave the same factory in the same finish, so nothing has to be matched afterwards.
Colour held across repeat orders
Plating and metallizing are run in house on two coating lines, and the reference sample stays on file for reorders.
Reinforced where the load sits
Steel bar or steel pipe carries the weight rather than the moulding alone.
Buyers Who Specify This Part
Casket and coffin factories. Plants running continuous lines that need the same corner profile and the same finish carton after carton.
Funeral supply distributors. Importers who stock sets in several finishes and sell them on to smaller casket builders.
Funeral homes with in-house workshops. Operations that assemble or repair caskets and need replacement corners that match an existing model.
What Goes Wrong Without It
- Corners from different batches do not match in colour, so a finished casket looks assembled from spare parts.
- Thin mouldings crack at the fixing hole when the casket is lifted.
- Sourcing corners, lugs and bars from three vendors leaves gaps in the set and slows the line.
- Low volume buyers get told the minimum order is a full container.
Where It Is Used
- Full couch and half couch wooden caskets
- Steel and stainless caskets, assembled or knock down
- European style coffins with tapered sides
- Cremation caskets and lower cost lines
Technical Features
- Four large corners plus small side corners in the standard set layout
- Fixing holes moulded in, so no drilling on the line
- Steel bar in long and short lengths for the sides and ends
- Recycled PP or ABS available where the specification allows it
Technical Data for 1# DG
| Model Number | 1# DG |
|---|---|
| Material | PP Recycle Or ABS New , Metal Pipe |
| Colour and Finish | Dark Gold,Light Gold,Copper |
| Style | US |
| Application | Decorative Coffin Accessories |
| Minimum Order | 100sets |
| Price Guide | USD 7-10/se |
| Packing | Carton. |
| Delivery Time | 30days |
| Monthly Capacity | 30000 Sets/ month |
| Payment Terms | L/C, T/T |
| Brand | StarOcean |
| Place of Origin | Zhejiang, China |
| Sample | Freely |
- Customization:
- Customized Casket Corners from StarOcean, Zhejiang, China
- StarOcean is the largest funeral manufacturer from China, specialized in Casket Corners. We offer customized Plastic Casket Corners perfect for coffin ornamentation.
- : Zhejiang, China
- : USD 7-10/se
- : 30000 Sets/ month
- : Decorative
- : Gold / Silver / Copper / Customizable
Figures are taken from the factory specification for this model. Confirm the current values with the sales team before issuing a purchase order.
How This Part Is Made
Corners and lugs are moulded in PP or ABS, with recycled PP and ABS offered for budget lines. Steel bars and pipes are painted or electroplated to match the moulded parts.
Tooling
Existing moulds cover most standard corner profiles, which removes tooling cost from a new project.
Injection
Parts are moulded on machines from 160 g to 500 g depending on the size of the corner.
Metallizing
Two vacuum metallizing and coating lines apply the gold, silver or bronze finish.
Set assembly
Corners, lugs and cut steel bars are counted into sets and bagged.
Quality Control
- Shot samples checked against the reference corner before the run starts
- Colour compared against the approved sample under the same light
- Fit check of corner to lug and bar before packing
- Carton count and drop check before sealing
Certification
ISO 9001 quality system, with SGS and BV reports on product ranges.
See the Trust Center for factory data, production lines and certification scope.
What Can Be Changed
- Colour matched to your sample rather than a stock gold
- Set content changed, for example bar length or the number of small corners
- Own brand poly bag and carton printing
- New profiles developed from a drawing, sketch or photo
How It Compares
Corner set from this factory
Corners, lugs and bars in one finish, moulds already available, from 100 sets.
Mixed sourcing
Lower headline price per part, but colour drift between vendors and more freight legs.
Zamak corners
Heavier and more expensive, used where a metal feel is required on premium lines.
Fitting and Handling
- Fix the four large corners to the corners of the casket, the small corners to the long sides, then hang the lugs.
- Slide the long bars through the side lugs and the short bars through the end lugs.
- Tighten from the inside so no fixing shows on the outer face.
- Keep one set from each shipment as the colour reference for the next order.
Further Detail on This Model
Coffin Corners 1# are classic coffin handles, they are designed to provide an elegant decoration to any coffin, making it look more unique and special. Its durable construction and beautiful design make it a great choice for any funeral.
Coffin Corners are made of high-quality plastic material for excellent durability and reliability. They are highly resistant to wear and tear and also have an eye-catching glossy finish that adds an elegant touch to any casket. Available in a variety of shapes and colors, you can customize your coffin decorations to suit your needs.
Coffin Corners are easy to install, just place them on the edge of the coffin and secure with the included screws. Corners are lightweight and easy to handle, making them ideal for any funeral.
Questions About This Model
What is the minimum order for 1# DG?
The minimum order published for this model is 100sets. Smaller trial quantities can be discussed on WhatsApp.
Which colours can this model be produced in?
The finishes listed for this model are: Dark Gold,Light Gold,Copper. Other colours can be matched from a physical sample.
How long is production after the order is confirmed?
Delivery published for this model is 30days from confirmation of colour and quantity. Peak season may add time, which is confirmed at order.
What is this model made from?
PP Recycle Or ABS New , Metal Pipe. Material can be changed where your specification requires it, for example virgin rather than recycled polymer.
Can I order a sample before committing to production?
Yes. Plastic samples are provided free of charge, with freight normally paid by the buyer and credited against a following order.
What is included in one coffin corner set?
A typical set has four large corners, small corners for the long sides, matching lugs, and steel bars in long and short lengths. Exact content varies by model and is listed on each product page.
Other Models in Coffin Corner
7#LG
Light Gold Plastic Coffin Corner High Quality Funeral Supplies Wholesale 7# LG
PP Recycle / ABS With Steel Bar
View Details
Casket Fittings And Hardware 18# S
Silver Plating High-Strength Metal Coffin Accessories for Funeral Ornamentation18#
ABS With Steel Pipe
View Details
11#S
Silver PP/ABS Material Coffin Corner Personalized Coffin Hardware Supplier 11# S
PP Or ABS Palstic With Steel Bar
View Details
7#G
Gold Plating ABS Custom Coffin Corners Set American Style High Durability 7#G
PP/ABS Plastic With Metal Pipe
View Details
Industry
How this part is specified by casket and coffin manufacturers.
Casket and Coffin ManufacturersRequest A Quote for 1# DG
Send the model number, quantity, finish and destination port. Quotations normally come back the same working day.