24K Gold Premium Coffin Corner Funeral Products for Wooden Coffin Handles 17#G
Injection moulded coffin corners and matching lugs, metallized in gold, silver or bronze and supplied loose or as complete sets with plated steel bars.
- Casket Corners
- Casket Hardware Wholesale
- MaterialPlastic Corner And Lugs With Steel Pipe In Set
- Finish24K Gold,Silver, Bronze,Customized
- Minimum Order100sets
- Delivery30days
- Capacity30000 Sets/ month
What This Model Is and Where It Fits
Injection moulded coffin corners and matching lugs, metallized in gold, silver or bronze and supplied loose or as complete sets with plated steel bars.
One supplier for the complete set
Corners, lugs and steel bars leave the same factory in the same finish, so nothing has to be matched afterwards.
Colour held across repeat orders
Plating and metallizing are run in house on two coating lines, and the reference sample stays on file for reorders.
Reinforced where the load sits
Steel bar or steel pipe carries the weight rather than the moulding alone.
Buyers Who Specify This Part
Casket and coffin factories. Plants running continuous lines that need the same corner profile and the same finish carton after carton.
Funeral supply distributors. Importers who stock sets in several finishes and sell them on to smaller casket builders.
Funeral homes with in-house workshops. Operations that assemble or repair caskets and need replacement corners that match an existing model.
What Goes Wrong Without It
- Corners from different batches do not match in colour, so a finished casket looks assembled from spare parts.
- Thin mouldings crack at the fixing hole when the casket is lifted.
- Sourcing corners, lugs and bars from three vendors leaves gaps in the set and slows the line.
- Low volume buyers get told the minimum order is a full container.
Where It Is Used
- Full couch and half couch wooden caskets
- Steel and stainless caskets, assembled or knock down
- European style coffins with tapered sides
- Cremation caskets and lower cost lines
Technical Features
- Four large corners plus small side corners in the standard set layout
- Fixing holes moulded in, so no drilling on the line
- Steel bar in long and short lengths for the sides and ends
- Recycled PP or ABS available where the specification allows it
Technical Data for Casket Handle 17#G
| Model Number | Casket Handle 17#G |
|---|---|
| Material | Plastic Corner And Lugs With Steel Pipe In Set |
| Colour and Finish | 24K Gold,Silver, Bronze,Customized |
| Application | Coffin Decoration Accessories |
| Minimum Order | 100sets |
| Price Guide | 10-12$/SET |
| Packing | Carton. |
| Delivery Time | 30days |
| Monthly Capacity | 30000 Sets/ month |
| Payment Terms | L/C, T/T |
| Brand | StarOcean |
| Place of Origin | Zhejiang, China |
| Sample | Freely |
- Set including: 4pcs of big corner, 8pcs of small lugs, 2pcs of 0.66m steel bar and 2pcs of 2.02m steel bar with paint
- Customization:
- The color can be customerized, and also supply the electronic plating treatment such as gold, antique brass or antique copper.
- The OEM or ODM service available.
- : Zhejiang, China
- : 10-12$/SET
- : 30000 Sets/ month
- : Decorative
Figures are taken from the factory specification for this model. Confirm the current values with the sales team before issuing a purchase order.
How This Part Is Made
Corners and lugs are moulded in PP or ABS, with recycled PP and ABS offered for budget lines. Steel bars and pipes are painted or electroplated to match the moulded parts.
Tooling
Existing moulds cover most standard corner profiles, which removes tooling cost from a new project.
Injection
Parts are moulded on machines from 160 g to 500 g depending on the size of the corner.
Metallizing
Two vacuum metallizing and coating lines apply the gold, silver or bronze finish.
Set assembly
Corners, lugs and cut steel bars are counted into sets and bagged.
Quality Control
- Shot samples checked against the reference corner before the run starts
- Colour compared against the approved sample under the same light
- Fit check of corner to lug and bar before packing
- Carton count and drop check before sealing
Certification
ISO 9001 quality system, with SGS and BV reports on product ranges.
See the Trust Center for factory data, production lines and certification scope.
What Can Be Changed
- Colour matched to your sample rather than a stock gold
- Set content changed, for example bar length or the number of small corners
- Own brand poly bag and carton printing
- New profiles developed from a drawing, sketch or photo
How It Compares
Corner set from this factory
Corners, lugs and bars in one finish, moulds already available, from 100 sets.
Mixed sourcing
Lower headline price per part, but colour drift between vendors and more freight legs.
Zamak corners
Heavier and more expensive, used where a metal feel is required on premium lines.
Fitting and Handling
- Fix the four large corners to the corners of the casket, the small corners to the long sides, then hang the lugs.
- Slide the long bars through the side lugs and the short bars through the end lugs.
- Tighten from the inside so no fixing shows on the outer face.
- Keep one set from each shipment as the colour reference for the next order.
Further Detail on This Model
Coffin Corner 17#G is a fashion designed product. The torch and leaves symbolize nature and harmony, both of which have beautiful meanings.
Our products are made of high-quality plastics. Only high-quality raw materials can make high-quality products, and this is what we pursue.
Products provide personalized customization services to better meet your needs.
Questions About This Model
What is the minimum order for Casket Handle 17#G?
The minimum order published for this model is 100sets. Smaller trial quantities can be discussed on WhatsApp.
Which colours can this model be produced in?
The finishes listed for this model are: 24K Gold,Silver, Bronze,Customized. Other colours can be matched from a physical sample.
How long is production after the order is confirmed?
Delivery published for this model is 30days from confirmation of colour and quantity. Peak season may add time, which is confirmed at order.
What is this model made from?
Plastic Corner And Lugs With Steel Pipe In Set. Material can be changed where your specification requires it, for example virgin rather than recycled polymer.
Can I order a sample before committing to production?
Yes. Plastic samples are provided free of charge, with freight normally paid by the buyer and credited against a following order.
What is included in one coffin corner set?
A typical set has four large corners, small corners for the long sides, matching lugs, and steel bars in long and short lengths. Exact content varies by model and is listed on each product page.
Other Models in Coffin Corner
11# LG
American Style 18K Gold Coffin Corner Wholesale Coffin Handles and Accessories 11# LG
Plastic(PP,ABS), PP New With Steel Bar
View Details
28#AB
Electroplated Bronze ABS New Design Coffin Corner Coffin Accessories 28#
ABS With Steel Bar
View Details
12# LG
18K Light Gold ABS Plastic Coffin Corner Coffin Ornament Funeral Interment 12# LG
PP Recycle And Steel Pipe
View Details
8#LG
Light Gold Custom PP Material Coffin Handles and Decorative Coffin Corners 8# LG
ABS，PP Recycle And Steel Bar
View Details
Industry
How this part is specified by casket and coffin manufacturers.
Casket and Coffin ManufacturersRequest A Quote for Casket Handle 17#G
Send the model number, quantity, finish and destination port. Quotations normally come back the same working day.